Search Results

There are 1072039 results for: content related to: Interfacial Roughness in Ceramic Matrix Composites

  1. Evaluation of Thermal Residual Stresses in Sic/Mlas and Sic/Sic Composites by the Microindentation Push-Down Test

    Proceedings of the 17th Annual Conference on Composites and Advanced Ceramic Materials, Part 1 of 2: Ceramic Engineering and Science Proceedings, Volume 14, Issue 7/8

    O. Sudre, B. Passilly, M. Parlier, Pages: 180–187, 2008

    Published Online : 28 MAR 2008, DOI: 10.1002/9780470314180.ch18

  2. You have free access to this content
    The influence of wear paths produced by hip replacement patients during normal walking on wear rates

    Journal of Orthopaedic Research

    Volume 26, Issue 9, September 2008, Pages: 1210–1217, Damien Bennett, Lee Humphreys, Seamus O'Brien, Connor Kelly, John Orr and David E. Beverland

    Version of Record online : 10 APR 2008, DOI: 10.1002/jor.20583

  3. Investigation on mechanical and tribological behavior of naturally woven coconut sheath-reinforced polymer composites

    Polymer Composites

    Volume 33, Issue 5, May 2012, Pages: 723–732, Irullappasamy Siva, Jebas Thangiah Winowlin Jappes and Bheemappa Suresha

    Version of Record online : 2 APR 2012, DOI: 10.1002/pc.22197

  4. Effect of Abrasive Wear on Interfacial Shear Sliding Resistance in Sic Fiber-Reinforced Al2O3 Matrix Composite

    Proceedings of the 21st Annual Conference on Composites, Advanced Ceramics, Materials, and Structures: A: Ceramic Engineering and Science Proceedings, Volume 18, Issue 3

    H. Kakisawa, Y. Kagawa, Pages: 757–762, 2008

    Published Online : 26 MAR 2008, DOI: 10.1002/9780470294437.ch82

  5. Tribology of Silicon Nitride and Silicon Nitride-Steel Sliding Pairs

    Proceedings of the 8th Annual Conference on Composites and Advanced Ceramic Materials: Ceramic Engineering and Science Proceedings, Volume 5, 7/8

    William Smothers, Pages: 460–469, 2008

    Published Online : 26 MAR 2008, DOI: 10.1002/9780470320228.ch3

  6. The Evolution of Interfacial Sliding Stresses During Cyclic Push-in Testing of C- and Bn-Coated Hi-Nicalon Fiber-Reinforced CMCs

    22nd Annual Conference on Composites, Advanced Ceramics, Materials, and Structures: A: Ceramic Engineering and Science Proceedings, Volume 19, Issue 3

    J. I. Eldridge, N. P. Bansal, R. T. Bhatt, Pages: 11–18, 2008

    Published Online : 26 MAR 2008, DOI: 10.1002/9780470294482.ch2

  7. Tribological Properties of SI–AL–O–N Ceramic Under Reciprocating Sliding and Fretting Conditions

    Mechanical Properties and Performance of Engineering Ceramics II: Ceramic Engineering and Science Proceedings, Volume 27, Issue 2

    Rajan Tandon, Andrew Wereszczak, Edgar Lara-Curzio, Pages: 727–737, 2008

    Published Online : 27 MAR 2008, DOI: 10.1002/9780470291313.ch68

  8. Investigation of Fiber/Matrix Interfacial Mechanical Behavior in Ceramic Matrix Composites by Cyclic Fiber Push-In Testing

    Proceedings of the 20th Annual Conference on Composites, Advanced Ceramics, Materials, and Structures - B: Ceramic Engineering and Science Proceedings, Volume 17, Issue 4

    J. I. Eldridge, R. T. Bhatt, N. P. Bansal, F. A. Olmstead, Pages: 266–279, 2008

    Published Online : 28 MAR 2008, DOI: 10.1002/9780470314876.ch28

  9. You have free access to this content
    Frontmatter

    Proceedings of the 16th Annual Conference on Composites and Advanced Ceramic Materials, Part 1 of 2: Ceramic Engineering and Science Proceedings, Volume 13, Issue 7/8

    John B. Wachtman, Pages: i–ix, 2008

    Published Online : 26 MAR 2008, DOI: 10.1002/9780470313954.fmatter

  10. Bonded Ceramic Foams Reinforced with Fibers for High Temperature Use

    Proceedings of the 16th Annual Conference on Composites and Advanced Ceramic Materials, Part 1 of 2: Ceramic Engineering and Science Proceedings, Volume 13, Issue 7/8

    G. Mcdonald, R. C. Hendricks, R. L. Mullen, Pages: 267–270, 2008

    Published Online : 26 MAR 2008, DOI: 10.1002/9780470313954.ch28

  11. Polycarbonate/molybdenum disulfide/carbon black composites: Physicomechanical, thermal, wear, and morphological properties

    Polymer Composites

    Volume 33, Issue 4, April 2012, Pages: 619–628, E. Basavaraj, B. Ramaraj and Siddaramaiah

    Version of Record online : 11 MAR 2012, DOI: 10.1002/pc.22179

  12. An Engineering Analysis for CMC Material Design Considerations Using Carborundum's Sintered SiC Fiber and Slurry Cast/Melt Infiltration Process

    Proceedings of the 19th Annual Conference on Composites, Advanced Ceramics, Materials, and Structures - A: Ceramic Engineering and Science Proceedings, Volume 16, Issue 4

    G. V. Srinivasan, V. Venkateswaran, S. K. Lau, Pages: 63–72, 2008

    Published Online : 26 MAR 2008, DOI: 10.1002/9780470314715.ch6

  13. Contribution of micro-motion to backside wear in a fixed bearing total knee arthroplasty

    Journal of Orthopaedic Research

    Rayna A.C. Levine, Kathleen A. Lewicki, John H. Currier, Michael B. Mayor and Douglas W. Van Citters

    Version of Record online : 16 MAR 2016, DOI: 10.1002/jor.23203

  14. The effects of run-in on rubber friction

    Journal of Applied Polymer Science

    Volume 27, Issue 12, December 1982, Pages: 4735–4744, R. P. Cooper and Bryan Ellis

    Version of Record online : 9 MAR 2003, DOI: 10.1002/app.1982.070271218

  15. Evaluation of Fibre-Matrix Interfacial Strength in a SiC Fibre-Reinforced Ti-6A1–4V Composite

    Proceedings of the 21st Annual Conference on Composites, Advanced Ceramics, Materials, and Structures: A: Ceramic Engineering and Science Proceedings, Volume 18, Issue 3

    R. Berriche, P. Saxena, A. K. Koul, J. Beddoes, Pages: 312–320, 2008

    Published Online : 26 MAR 2008, DOI: 10.1002/9780470294437.ch35

  16. Rough Fiber Pull-Out in Brittle Matrix Composites: Experiments and Simulations

    Proceedings of the 17th Annual Conference on Composites and Advanced Ceramic Materials, Part 1 of 2: Ceramic Engineering and Science Proceedings, Volume 14, Issue 7/8

    Cédric K. Bhihe, Anthony G. Evans, Pages: 249–256, 2008

    Published Online : 28 MAR 2008, DOI: 10.1002/9780470314180.ch26

  17. Influence of Temperature and Sliding Speed on Friction and Wear of SiSiC and MgO-ZrO2

    12th Annual Conference on Composites and Advanced Ceramic Materials, Part 2 of 2: Ceramic Engineering and Science Proceedings, Volume 9, Issue 9/10

    M. Woydt, K.-H. Habig, Pages: 1419–1429, 2008

    Published Online : 26 MAR 2008, DOI: 10.1002/9780470310502.ch35

  18. Quaternary relief generation by polythermal glacier ice

    Earth Surface Processes and Landforms

    Volume 30, Issue 9, August 2005, Pages: 1145–1159, Jane K. W. Staiger, John C. Gosse, Jesse V. Johnson, James Fastook, James T. Gray, Daniel F. Stockli, Lisa Stockli and Robert Finkel

    Version of Record online : 30 AUG 2005, DOI: 10.1002/esp.1267

  19. Fiber Debonding and Pullout Processes in Ceramic Composites

    Proceedings of the 16th Annual Conference on Composites and Advanced Ceramic Materials, Part 1 of 2: Ceramic Engineering and Science Proceedings, Volume 13, Issue 7/8

    D. R. Mumm, K. T. Faber, Pages: 70–80, 2008

    Published Online : 26 MAR 2008, DOI: 10.1002/9780470313954.ch8

  20. You have full text access to this OnlineOpen article
    Tribotronic Enhanced Photoresponsivity of a MoS2 Phototransistor

    Advanced Science

    Volume 3, Issue 6, June 2016, Yaokun Pang, Fei Xue, Longfei Wang, Jian Chen, Jianjun Luo, Tao Jiang, Chi Zhang and Zhong Lin Wang

    Version of Record online : 18 FEB 2016, DOI: 10.1002/advs.201500419