Search Results

There are 3698 results for: content related to: Enhanced polymer filling and uniform shrinkage of polymer and mold in a hot embossing process

  1. Hot-embossing experiments of polymethyl methacrylate across the glass transition temperature with variation in temperature and hold times

    Polymer Engineering & Science

    Volume 52, Issue 6, June 2012, Pages: 1284–1292, Kamakshi Singh and Rebecca B. Dupaix

    Article first published online : 17 FEB 2012, DOI: 10.1002/pen.23066

  2. Thermal stresses and birefringence in quenched tubes and rods: Simulation and experiment

    Polymer Engineering & Science

    Volume 51, Issue 1, January 2011, Pages: 179–200, Antonio J. Carrillo and A.I. Isayev

    Article first published online : 29 NOV 2010, DOI: 10.1002/pen.21774

  3. Modeling the continuous entrapment and growth of gas bubbles during bulk polymerization of methyl methacrylate

    Polymer Engineering & Science

    Volume 51, Issue 10, October 2011, Pages: 1942–1956, Hitesh Sahni, Santosh K. Gupta and Anurag Mehra

    Article first published online : 31 AUG 2011, DOI: 10.1002/pen.22067

  4. Real-time diagnosis of gas-assisted hot embossing process by ultrasound

    Polymer Engineering & Science

    Volume 53, Issue 10, October 2013, Pages: 2175–2182, Chin-Chi Cheng, Chia-Lin Wu, Kuo-Ting Wu and Sen-Yeu Yang

    Article first published online : 16 FEB 2013, DOI: 10.1002/pen.23465

  5. Numerical modeling of nonisothermal polymer crystallization kinetics: Flow and thermal effects

    Polymer Engineering & Science

    Volume 50, Issue 10, October 2010, Pages: 2044–2059, Matthieu Zinet, Rabie El Otmani, M'hamed Boutaous and Patrice Chantrenne

    Article first published online : 25 JUN 2010, DOI: 10.1002/pen.21733

  6. Uniform shell patterning using rubber-assisted hot embossing process. II. Process analysis

    Polymer Engineering & Science

    Volume 51, Issue 3, March 2011, Pages: 601–608, Pratapkumar Nagarajan and Donggang Yao

    Article first published online : 11 JAN 2011, DOI: 10.1002/pen.21854

  7. A mathematical model to study the effect of the air jet in the film blowing process

    Polymer Engineering & Science

    Volume 51, Issue 7, July 2011, Pages: 1301–1315, Kostas D. Housiadas

    Article first published online : 22 FEB 2011, DOI: 10.1002/pen.21926

    Corrected by:

    Erratum: Erratum

    Vol. 51, Issue 10, 2115–2117, Article first published online: 9 SEP 2011

  8. Real-time monitoring and parameter estimation of the emulsion polymerization of carboxylated styrene/butadiene latexes

    Polymer Engineering & Science

    Volume 51, Issue 10, October 2011, Pages: 1919–1932, Matheus Soares, Fabricio Machado, Alessandro Guimarães, Marcelo M. Amaral and José Carlos Pinto

    Article first published online : 9 SEP 2011, DOI: 10.1002/pen.22002

  9. Inferential closed-loop control of particle size and molecular weight distribution in emulsion polymerization of styrene

    Polymer Engineering & Science

    Volume 50, Issue 12, December 2010, Pages: 2306–2320, Ehsan Vafa, Mohammad Shahrokhi and Hossein Abedini

    Article first published online : 7 JUL 2010, DOI: 10.1002/pen.21757

  10. Improved mathematical modeling for the sheet reheat phase during thermoforming

    Polymer Engineering & Science

    Volume 52, Issue 3, March 2012, Pages: 625–636, Sohail Akbar Khan, Patrick Girard, Nadia Bhuiyan and Vince Thomson

    Article first published online : 15 NOV 2011, DOI: 10.1002/pen.22125

  11. Experimental identification of the deformation mechanisms during sintering of cold compacted polytetrafluoroethylene powders

    Polymer Engineering & Science

    Volume 51, Issue 11, November 2011, Pages: 2220–2235, Rodrigo Bresciani Canto, Nicolas Schmitt, Jonas De Carvalho and René Billardon

    Article first published online : 13 MAY 2011, DOI: 10.1002/pen.21994

  12. Numerical simulation and experimental verification of the filling stage in injection molding

    Polymer Engineering & Science

    Volume 52, Issue 1, January 2012, Pages: 42–51, Wei Wang, Xikui Li and Xianhong Han

    Article first published online : 15 JUL 2011, DOI: 10.1002/pen.22043

  13. Prediction of glass transition temperatures of aromatic heterocyclic polyimides using an ANN model

    Polymer Engineering & Science

    Volume 50, Issue 8, August 2010, Pages: 1547–1557, Wanqiang Liu

    Article first published online : 29 MAR 2010, DOI: 10.1002/pen.21670

  14. Investigation on the motion of different types of fibers in the vortex spinning nozzle

    Polymer Engineering & Science

    Volume 52, Issue 4, April 2012, Pages: 856–867, Zeguang Pei, Biyu Hu, Chuanyun Diao and Chongwen Yu

    Article first published online : 15 NOV 2011, DOI: 10.1002/pen.22152

  15. An uncertainty based formal approach towards parametric sensitivity: A case study on epoxy polymerization

    Polymer Engineering & Science

    Volume 51, Issue 10, October 2011, Pages: 1957–1968, Kishalay Mitra

    Article first published online : 31 AUG 2011, DOI: 10.1002/pen.22127

  16. Sag in thermoforming

    Polymer Engineering & Science

    Volume 50, Issue 10, October 2010, Pages: 2060–2068, A.J. Giacomin, A.W. Mix and O. Mahmood

    Article first published online : 25 JUN 2010, DOI: 10.1002/pen.21734

  17. Analysis of polymer viscoelastic properties based on compressive creep tests during hot embossing for two-dimensional polyethylene terephthalate nanochannels

    Polymer Engineering & Science

    Zhifu Yin, E Cheng, Helin Zou and Petr Jurčíček

    Article first published online : 29 OCT 2013, DOI: 10.1002/pen.23790

  18. Sheet bowing in thermoforming

    Polymer Engineering & Science

    Volume 51, Issue 12, December 2011, Pages: 2571–2577, P.B. Vodak, A.W. Mix and A.J. Giacomin

    Article first published online : 23 OCT 2011, DOI: 10.1002/pen.22029

  19. Birefringence in injection-compression molding of amorphous polymers: Simulation and experiment

    Polymer Engineering & Science

    Volume 53, Issue 8, August 2013, Pages: 1786–1808, Nam Hyung Kim and Avraam I. Isayev

    Article first published online : 27 MAR 2013, DOI: 10.1002/pen.23429

  20. A surface model-based simulation for warpage of injection-molded parts

    Polymer Engineering & Science

    Volume 51, Issue 4, April 2011, Pages: 785–794, Huamin Zhou, Zhiyong Wang, Jianhui Li and Dequn Li

    Article first published online : 11 JAN 2011, DOI: 10.1002/pen.21884