Nonlinear Dynamics of Production Systems

Copyright © 2004 Wiley-VCH Verlag GmbH & Co. KGaA

Nonlinear Dynamics of Production Systems

Editor(s): Günter Radons, Reimund Neugebauer

Published Online: 28 JAN 2005

Print ISBN: 9783527404308

Online ISBN: 9783527602582

DOI: 10.1002/3527602585

About this Book

Product Information

About The Product

This reference work provides a comprehensive insight into past developments in the application of non-linear dynamics, such as production systems in the manufacturing and process engineering, mechanical engineering and plant construction and automation technology. As such, it is the first publication to document the successful implementation of non-linear dynamics into current tasks or problems of engineering thus far unsolved. The interdisciplinary team of contributors from research and industry establishes ties between mechanical methods of manufacturing and new methods reaching the dynamics of production lines and complete production systems.

Table of contents

    1. You have free access to this content
      Front Matter (pages i–xxvii)

    1. You have free access to this content
      Dynamics and Control of Production Processes (pages 1–3)

  3. Part I: Dynamics and Control of Production Processes

    1. Chapter 1

      Dynamical Systems and Production Systems (pages 5–24)

      D. Armbruster

    2. Chapter 2

      Method of Stabilization of a Target Regime in Manufacturing and Logistics (pages 25–38)

      L.A. Bunimovich

    3. Chapter 3

      Manufacturing Systems with Restricted Buffer Sizes (pages 39–54)

      K. Peters, J. Worbs, U. Parlitz and H.-P. Wiendahl

    4. Chapter 4

      Modeling and Analysis of a Re-Entrant Manufacturing System (pages 55–69)

      B. Scholz-Reiter, M. Freitag, A. Schmieder, A. Pikovsky and I. Katzorke

    5. Chapter 5

      Nonlinear Models for Control of Manufacturing Systems (pages 71–83)

      E. Lefeber

    6. Chapter 6

      Modeling and Optimization of Production Process: Lessons from Traffic Dynamics (pages 85–105)

      D. Helbing

    1. You have free access to this content
      Machine Tools and Manufacturing Processes (pages 107–109)

  5. Part II: Machine Tools and Manufacturing Processes

    1. Chapter 7

      Nonlinear Dynamics of High-Speed Milling Subjected to Regenerative Effect (pages 111–128)

      G. Stépán, R. Szalai and T. Insperger

    2. Chapter 8

      Mode-Coupled Regenerative Machine Tool Vibrations (pages 129–151)

      T. Kalmár-Nagy and F.C. Moon

    3. Chapter 9

      Influence of the Workpiece Profile on the Self-Excited Vibrations in a Metal Turning Process (pages 153–167)

      R. Rusinek, K. Szabelski and J. Warminski

    4. Chapter 10

      Modeling of High-Speed Milling for Prediction of Regenerative Chatter (pages 169–186)

      N. van de Wouw, R.P.H. Faassen, J.A.J. Oosterling and H. Nijmeijer

    5. Chapter 11

      Nonlinear Dynamics of an External Cylindrical Grinding System and a Strategy for Chatter Compensation (pages 187–207)

      H.K. Tönshoff, B. Denkena, J. Jacobsen, B. Heimann, O. Schütte, K. Grudzinski and A. Bodnar

    6. Chapter 12

      Problems Arising in Finite-Element Simulations of the Chip Formation Process Under High Speed Cutting Conditions (pages 209–227)

      A. Behrens, K. Kalisch, B. Westhoff and J. Wulfsberg

    7. Chapter 13

      Finite-Element Simulation of Nonlinear Dynamical Effects in Coating–Substrate Systems (pages 229–249)

      G. Schmidt, R. Leopold and R. Neugebauer

    8. Chapter 14

      Investigation of Nonlinear Dynamic Effects in Loaded Layer–Substrate Systems through Molecular Dynamics Simulation (pages 251–263)

      R. Rentsch, E. Brinksmeier and J. Li

    9. Chapter 15

      Simulation, Experimental Investigation and Control of Thermal Behavior in Modular Tool Systems (pages 265–285)

      J. Konvicka, N. Wessel, F. Weidermann, S. Nestmann, R. Neugebauer, U. Schwarz, A. Wessel and J. Kurths

    10. Chapter 16

      Wrinkling in Sheet Metal Spinning (pages 287–303)

      M. Kleiner, R. Göbel, Ch. Klimmek, B. Heller, V. Reitmann and H. Kantz

    11. Chapter 17

      Nonlinear Vibrations During the Pass in a Steckel Mill Strip Coiling Process (pages 305–316)

      H.J. Holl, G. Finstermann, K. Mayrhofer and H. Irschik

    1. You have free access to this content
      Dynamics of Robots and Machines (pages 317–319)

  7. Part III: Dynamics of Robots and Machines

    1. Chapter 18

      New Type of Forming Machine (pages 321–338)

      F. Peterka

    2. Chapter 19

      Nonlinear Vibration in Gear Systems (pages 339–348)

      G. Litak and M.I. Friswell

    3. Chapter 20

      Measurement and Identification of Pre-Sliding Friction Dynamics (pages 349–367)

      F. Al-Bender, V. Lampaert, S.D. Fassois, D.C. Rizos, K. Worden, D. Engster, A. Hornstein and U. Parlitz

    4. Chapter 21

      Coordination of Mechanical Systems (pages 369–386)

      H. Nijmeijer and A. Rodriguez-Angeles

    1. You have free access to this content
      Non-Conventional Manufacturing Processes (pages 387–389)

  9. Part IV: Non-Conventional Manufacturing Processes

    1. Chapter 22

      Nonlinear Dynamics and Control of Ripple Formation in Abrasive Water-Jet Cutting (pages 391–410)

      Prof. Dr. G. Radons, T. Ditzinger, R. Friedrich, A. Henning, A. Kouzmichev and E. Westkämper

    2. Chapter 23

      Modeling and Simulation of Process Monitoring and Control in Laser Cutting (pages 411–426)

      W. Schulz, W. Kostrykin, J. Michel and M. Nießen

    3. Chapter 24

      Approximate Model for Laser Welding (pages 427–441)

      J. Michel, S. Pfeiffer, W. Schulz, M. Nießen and V. Kostrykin

    4. Chapter 25

      Short-Time Dynamics in Laser Material Processing (pages 443–451)

      V. Kostrykin, W. Schulz, M. Nießen and J. Michel

    5. Chapter 26

      An Approach to a Process Model of Laser Beam Melt Ablation Using Methods of Linear and Nonlinear Data Analysis (pages 453–468)

      R. Donner, A. Cser, U. Schwarz, A. Otto and U. Feudel

    6. Chapter 27

      Dynamics-Based Monitoring of Manufacturing Processes: Detection of Transitions between Process States (pages 469–480)

      E. Govekar, J. Gradišek, I. Grabec, A. Baus, F. Klocke, M. Geisel and M. Geiger

    1. You have free access to this content
      Chemical and Electro-Chemical Processes (pages 481–483)

  11. Part V: Chemical and Electro-Chemical Processes

    1. Chapter 28

      Real-Time Monitoring of Dynamical State Changes in Staged Coal Combustion (pages 485–501)

      C.S. Daw, C.E.A. Finney, T.A. Fuller, T.J. Flynn and R.T. Bailey

    2. Chapter 29

      Towards Constructive Nonlinear Dynamics – Case Studies in Chemical Process Design (pages 503–526)

      M. Mönnigmann, J. Hahn and W. Marquardt

    3. Chapter 30

      Nonlinear Dynamics in Chemical Engineering and Electro-Chemical Manufactory Technologies (pages 527–557)

      P.J. Plath, M. Baune, M. Buhlert, C. Gerlach, A. Kouzmitchev, P. Thangavel, E. van Raaij, H. Mathes, S. Diaz Alfonso and Th. Rabbow

    4. Chapter 31

      Galvanostatic Studies of an Oxygen-Evolving Electrode (pages 559–573)

      C. Gerlach, A. Visser and P. J. Plath

    5. Chapter 32

      Wavelet Analysis of Electropolished Surfaces (pages 575–592)

      A. Mora, C. Gerlach, T. Rabbow, P.J. Plath and M. Haase

    6. Chapter 33

      Spatial Inhomogeneity in Lead–Acid Batteries (pages 593–605)

      U. Sydow, M. Buhlert, E.C. Haß and P.J. Plath

    1. You have free access to this content
      Index (pages 607–609)

SEARCH