Magnesium: Proceedings of the 6th International Conference Magnesium Alloys and Their Applications

Copyright © 2004 Wiley-VCH Verlag GmbH & Co. KGaA

Magnesium: Proceedings of the 6th International Conference Magnesium Alloys and Their Applications

Editor(s): K. U. Kainer

Published Online: 22 APR 2005

Print ISBN: 9783527309757

Online ISBN: 9783527603565

DOI: 10.1002/3527603565

About this Book

Product Information

About The Product

The need for light-weight materials, especially in the automobile industry, created renewed interest in innovative applications of magnesium materials. This demand has resulted in increased research and development activity in companies and research institutes in order to achieve an improved property profile and better choice of alloy systems.
Here, development trends and application potential in different fields like the automotive industry and communication technology are discussed in an interdisciplinary framework.

Table of contents

    1. You have free access to this content
      Front Matter (pages i–xxiv)

    2. Chapter 1

      Microstructural Design for Enhanced Elevated Temperature Properties in Sand-Castable Magnesium Alloys (pages 1–11)

      C.J. Bettles and M.A. Gibson

    3. Chapter 2

      Thermodynamic Database for Mg-Alloys: Progress and Application to Mg-Al-Ca-Si Alloy Development (pages 12–17)

      Rainer Schmid-Fetzer and Joachim Gröbner

    4. Chapter 3

      Development of the New Creep Resistant Alloy AS31 (pages 18–24)

      Vadim V. Agalakov

    5. Chapter 4

      Phase Formation, Precipitation and Strengthening Mechanisms in Mg-Zn-Sn Alloys (pages 25–30)

      S. Cohen, G.R. Goren-Muginstein, S. Avraham, G. Dehm and M. Bamberger

    6. Chapter 5

      Die Casting for High Performance – Focus on Alloy Development (pages 31–36)

      Dr. Per Bakke and Dr. Håkon Westengen

    7. Chapter 6

      New Mg-Alloys for the ThixomoldingTM Process (pages 37–42)

      Julio Aguilar, Martin Fehlbier and Andreas Bühring-Polaczek

    8. Chapter 7

      Structure and Morphology of Effective Obstacles in High Performance Mg — Rare Earth Base Alloys (pages 43–48)

      Bohumil Smola, Ivana Stulíková, Jitka Pelcová and Barry L. Mordike

    9. Chapter 8

      Regularities in the Phase Diagrams and Behaviour during Aging of the Ternary Mg-Base Alloys Containing Two Rare-Earth Metals of Different Subgroups (pages 49–54)

      Lazar Rokhlin, Tatyana Dobatkina and Nadezhda Nikitina

    10. Chapter 9

      Development of New Magnesium Alloys for Advanced Applications (pages 55–61)

      B. Bronfin, E. Aghion, F. von Buch, S. Schumann and H. Friedrich

    11. Chapter 10

      Creep Resistance and Creep Kinetics of Mg-alloys (pages 62–67)

      W. Blum, Y. J. Li, X. H. Zeng, B. von Großmann, C. Haberling and H.-G. Haldenwanger

    12. Chapter 11

      Creep Behaviour of MgZnRE Alloys Formed by Semi-Solid-Casting (pages 68–73)

      E. D. Morales, N. Hort and Prof. Dr. K. U. Kainer

    13. Chapter 12

      Creep Resistant Magnesium Alloys for Powertrain Applications (pages 74–93)

      Mihriban. O. Pekguleryuz and A. Arslan Kaya

    14. Chapter 13

      Russian Ultralight Constructional Mg–Li Alloys. Their Structure, Properties, Manufacturing, Applications (pages 94–99)

      Fedor M. Elkin and Valentin G. Davydov

    15. Chapter 14

      The Effect of Grain Size on the Mechanical Properties of AM-SC1 (pages 100–105)

      G. Dunlop, C.J. Bettles, J.R. Griffiths, K. Venkatesan, Lihui Zheng and Ma Qian

    16. Chapter 15

      Thermal Properties of Mg-Li and Mg-Li-Al Alloys (pages 106–109)

      Alexandra Rudajevová, Pavel Lukáč and Stanislav Kúdela

    17. Chapter 16

      Designing for Improved Creep Resistance in the RE–Free Magnesium Alloys (pages 110–115)

      Vladimir G. Tkachenko

    18. Chapter 17

      Ageing Characteristics and Creep Resistance of Mg-Y-Nd-Sc-Mn Alloy (pages 116–121)

      Ivana Stulíková, Bohumil Smola, Jitka Pelcová and Barry L. Mordike

    19. Chapter 18

      Deformation Behaviour of Mg-Li-Al Alloys at Room and Elevated Temperatures (pages 122–127)

      Zdeněk Drozd, Zuzanka Trojanová and Viera Gärtnerová

    20. Chapter 19

      The Effect of Grain Size on the Bolt Load Retention Behaviour of AMC-SC1 (pages 128–133)

      C.J. Bettles, Lihui Zheng, K. Venkatesan and Ma Qian

    21. Chapter 20

      High Temperature Behaviour of a New Mg-Ca-Zn Alloy (pages 134–139)

      A. Zilberov, G. R. Goren-Muginstein and M. Bamberger

    22. Chapter 21

      Investigation of Die Cast Mg-Al Alloys with Additions of Sn, Si and Sb (pages 140–149)

      Dr. Per Bakke, Dr. Ketil Pettersen and Dr. Håkon Westengen

    23. Chapter 22

      An Electron Microscopy Investigation on As-Cast AZ91D Alloy Modified with Nitrogen (pages 150–157)

      A.A. Kaya, O. Yucel, D. Eliezer and E. Aghion

    24. Chapter 23

      Recrystallization Behaviour of Four Magnesium Alloys (pages 158–163)

      L.W.F. Mackenzie, F.J. Humphreys, G.W. Lorimer, K. Savage and T. Wilks

    25. Chapter 24

      Dynamic Recrystallization of Mg-3Al-1Zn (pages 164–169)

      T. Laser, Ch. Hartig, R. Bormann, J. Bohlen and D. Letzig

    26. Chapter 25

      Mechanical Properties and Formability of PM Mg-Al Based Alloys (pages 170–175)

      K. Matsuzaki, K. Hatsukano, K. Hanada, M. Takahashi and T. Shimizu

    27. Chapter 26

      Corrosion Properties of Conversion Plasma Coated Magnesium Alloys (pages 176–181)

      H. M. Nykyforchyn, W. Dietzel, M. D. Klapkiv and C. Blawert

    28. Chapter 27

      The Effect of Variations in Melt Temperature on the Grain Structures in an AM60 die Casting (pages 182–189)

      Hans I. Laukli, Otto Lohne, Lars Arnberg, Haavard Gjestland and Stian Sannes

    29. Chapter 28

      Microstructural Characterisation of AZ91 Magnesium Alloy (pages 190–195)

      Andrzej Kiełbus, Maria Sozańska and Lubomirc Ciżek

    30. Chapter 29

      Microstructural Changes of AZ91 Magnesium Alloy After Heat Treatment (pages 196–201)

      Andrzej Kiełbus, Lubomir Ciżek and Libor Pawlica

    31. Chapter 30

      Microstructure of Ultra Fine Grained Mg and Mg-10 wt.% Gd Prepared by High-Pressure Torsion (pages 202–207)

      J. Cizek, I. Prochazka, I. Stulikova, B. Smola, R. Kuzel, V. Cherkaska, R.K. Islamgaliev and O. Kulyasova

    32. Chapter 31

      Development of New Grain Structure and Tensile Properties Improving in a Hot Pressed and ECAP Processed ZK60 Magnesium Alloy (pages 208–213)

      A. Galiyev, R. Kaibyshev and M. Almakaev

    33. Chapter 32

      Texture Formation and Texture Modelling of AZ31 Magnesium Wrought Alloy (pages 214–219)

      A. Styczynski, Ch. Hartig, R. Bormann, F. Kaiser, J. Bohlen and D. Letzig

    34. Chapter 33

      Texture Development of AM20 Tensile Samples under Load (pages 220–225)

      S.B. Yi, H.-G. Brokmeier, Prof. Dr. K. U. Kainer and T. Lippmann

    35. Chapter 34

      Strengthening Phases in Extruded Quasicrystal Containing Mg-Zn-Y Alloys (pages 226–231)

      Alok Singh, A.P. Tsai, M. Nakamura, M. Watanabe and A. Kato

    36. Chapter 35

      Grain Structure Characterization of AM60 Die Castings by Electron Backscatter Diffraction (EBSD) Measurements in SEM (pages 232–235)

      Hans I. Laukli, Otto Lohne and Lars Arnberg

    37. Chapter 36

      Possibilities of ECAP of Magnesium Alloy (pages 236–241)

      Katarzyna N. Braszczyńska

    38. Chapter 37

      Electron Probe Micro Analysis of Sedimented Zirconium Particles in Magnesium (pages 242–247)

      Bruce Davis and Keyna O'Reilly

    39. Chapter 38

      Superplasticity in Hot-rolled Magnesium Alloy AZ31 Sheets (pages 248–253)

      P. Zhang, J. Wendt, V. Šupik, J. Zhang and F. Holländer

    40. Chapter 39

      Extrusion of Magnesium Profiles and Microstructure Characterization (pages 254–259)

      Sören Müller, Ingwer Denks, Klaus Müller and Anke Pyzalla

    41. Chapter 40

      Investigating the Plastic Deformation Behaviour of Magnesium Alloy AZ31 by Plane Strain Forging of U and H Section (pages 260–265)

      M.S. Yong and S.C.V. Lim

    42. Chapter 41

      Application of Isothermal Rolling for Improvement of Sheet Formability of a Magnesium Alloy (pages 266–271)

      A. Galiyev, R. Kaibyshev and D. Voronin

    43. Chapter 42

      Influence of Al Content (<3%) on the Extrusion Limit Diagram (pages 272–277)

      Matthew R. Barnett, Ji-Yong Yao and Chris Davies

    44. Chapter 43

      Comparison of Microstructure and Mechanical Properties of Indirect and Hydrostatic Extruded Magnesium Alloys (pages 278–284)

      J. Swiostek, J. Bohlen, D. Letzig and K.U. Kainer

    45. Chapter 44

      Improvements to the Rolling-Process in Order to Increase the Formability of Magnesium Wrought Alloys (pages 285–293)

      Friedrich-Wilhelm Bach, Michael Rodman, Mirko Schaper, Arne Rossberg, Eckart Doege and Gerrit Kurz

    46. Chapter 45

      The Effect of Strain-Hardening and Process Parameters on the Forgeability of Wrought Magnesium Alloys (pages 294–299)

      Johnson C.F. Chan, C.J. Tay and M.S. Yong

    47. Chapter 46

      Superplasticity in Magnesium Alloys Processed by Different-Roll-Speeds Rolling (pages 300–305)

      Shangli Dong, Tsunemichi Imai, Ichinori Shigemastu and Naobumi Saito

    48. Chapter 47

      Results of Tempered Hydroforming of Magnesium Sheets with Hydroforming Fluids (pages 306–312)

      Reimund Neugebauer and Michael Seifert

    49. Chapter 48

      Bending Magnesium Extrusions (pages 313–317)

      R. Gradinger, M. Brandecker, H. Kilian and A. Wahlen

    50. Chapter 49

      Drawing of Magnesium Wires at Ambient Temperature (pages 318–323)

      Jörg Eickemeyer, Albert Güth, Martina Falter and Ralph Opitz

    51. Chapter 50

      The MAGNEXTRUSCO Project: Process and Alloy Development for Hydrostatic Extrusion of Magnesium (pages 324–330)

      A.J. den Bakker, W.H. Sillekens, J. Bohlen, K.U. Kainer and G. Barton

    52. Chapter 51

      Microstructure and Mechanical Properties of Squeeze Cast AM60 Mg Composites Reinforced with AISI 304 Wires (pages 331–336)

      Jae Joong Kim, Min Soo Yoo, Jong Dae Lim and Nack J. Kim

    53. Chapter 52

      Thermal Strain in Mg Composites (pages 337–341)

      Alexandra Rudajevová and Pavel Lukáč

    54. Chapter 53

      Synthesis of TiC Dispersed Composite in Mg-Alloy Matrix (pages 342–347)

      D.W. Lee, S.V. Aleksandrovkii, V.M. Sizyakov and D.V. Kutsenko

    55. Chapter 54

      Influence of Fibre Preform Permeability on Infiltration of Magnesium-Zinc Base Alloys (pages 348–353)

      M.S Yong, R.I. Temple and A.J. Clegg

    56. Chapter 55

      Magnesium Integral Foams — Production and Properties (pages 354–359)

      Markus Hirschmann, Matthias Lamm, Carolin Körner and Robert F. Singer

    57. Chapter 56

      Creep of Reinforced and Unreinforced QE22 Magnesium Alloy (pages 360–365)

      M. Pahutova, V. Sklenicka, K. Kucharova, M. Svoboda and Prof. Dr. K. U. Kainer

    58. Chapter 57

      Thermal Exposure Behaviour of Aluminum Borate Whisker Reinforced Magnesium Matrix Composites (pages 366–371)

      M. Y. Zheng, K. Wu, M. Liang, S. Kamado and Y. Kojima

    59. Chapter 58

      Creep Properties of Mg Dispersion-Strengthened by Graphite (pages 372–377)

      Hans Ferkel

    60. Chapter 59

      High Strength Si-O-C Ceramic Foams for the Reinforcement of Mg-Alloys (pages 378–383)

      J. Zeschky, T. Höfner, J. Lo, M. Scheffler and P. Greil

    61. Chapter 60

      Creep Behavior of Mg-Alloys AE42 and AZ91 Reinforced with Carbon Short Fibers (pages 384–389)

      S. Ataya, S. Mielke and E. El-Magd

    62. Chapter 61

      High Performance Magnesium Composite Alloys with Mg2Si Dispersoids via Solid-State Synthesis Process (pages 390–395)

      Katsuyoshi Kondoh and Tatsuhiko Aizawa

    63. Chapter 62

      Fracture Toughness Behaviour of As-Cast and Long-Term Annealed Pressure Die Cast Magnesium Alloys (pages 396–401)

      Doris Regener and Gabriele Dietze

    64. Chapter 63

      Influence of Strain Rate and Temperature on Deformation and Fracture Behaviour of Magnesium Alloy MgAl8Zn: Tests and Numerical Simulations (pages 402–408)

      E. El-Magd and M. Abouridouane

    65. Chapter 64

      Low-Temperature Superplasticity in Microcrystalline ZK60 and AZ91 Magnesium Alloys Processed by ECAP (pages 409–414)

      V. N. Chuvil'deev, T. G. Nieh, M. Yu. Gryaznov, A. N. Sysoev and V. I. Kopylov

    66. Chapter 65

      Structural Durability and Fatigue Life Assessment for Magnesium Diecast Specimen (pages 415–420)

      Karl Ludwig Kotte and Sven Werdin

    67. Chapter 66

      Microstructure/Property Relationships of Three Mg-RE-Zn-Zr Alloys (pages 421–426)

      L. Gill, G.W. Lorimer and P. Lyon

    68. Chapter 67

      Influence of Extrusion Methods on Microstructure and Mechanical Properties of AZ31 Magnesium Alloy (pages 427–432)

      J. Dzwonczyk, N. Hort and K. U. Kainer

    69. Chapter 68

      Anisotropic Mechanical Properties of Extruded Magnesium Alloy AZ31 (pages 433–438)

      C.H.J. Davies, F. Xiong and M. Battaini

    70. Chapter 69

      Mechanical Properties of Hot-Rolled Magnesium AZ31 Sheets (pages 439–443)

      J. Wendt, V. Šupik, P. Zhang and J. Zhang

    71. Chapter 70

      High Cycle Fatigue of Magnesium Alloys (pages 444–449)

      Herwig Mayer, Anton Stich, Bernhard Zett and Hans-Günther Haldenwanger

    72. Chapter 71

      Fatigue Life Prediction of Magnesium Alloys for Structural Applications (pages 450–455)

      Yukio Miyashita, Zainuddin bin Sajuri, Takashi Umehara and Yoshiharu Mutoh

    73. Chapter 72

      Correlation of Microstructure and Mechanical Properties of Rolled Magnesium Sheet AZ31 (pages 456–462)

      F. Kaiser, J. Bohlen, D. Letzig, K.U. Kainer, A. Styczynski and Ch. Hartig

    74. Chapter 73

      Effect of Warm Forming on Mechanical Properties of An AZ31 Magnesium Alloy Sheet (pages 463–468)

      H. Takuda, H. Fujimoto and D. Inoue

    75. Chapter 74

      Stress State Dependent Deformability of Polycrystalline Magnesium (pages 469–474)

      T. Törköly, A. Eleöd and Gy. Ziaja

    76. Chapter 75

      A Method to Determine the Damping Behaviour of Coatings on Cast Magnesium Alloy AZ91 (pages 475–482)

      J. Göken, D. Letzig and K.U. Kainer

    77. Chapter 76

      Microstructure and Mechanical Properties of Heat Treated Mg-Zn-Al Based Alloys (pages 483–488)

      Valérie Lemaire, Dominique Dubé and Réal Tremblay

    78. Chapter 77

      Analysis of Deformation and Fracture Mechanisms in Mg-Az31 Sheet Material (pages 489–494)

      Gaofeng Quan and Jürgen Heerens

    79. Chapter 78

      Unstable Plastic Deformation in Mg Alloys-Post Relaxation Effect (pages 495–500)

      Zuzanka Trojanová, Pavel Lukáč and Luboš Číźek

    80. Chapter 79

      On the Reliability of Yield Strength Data Evaluated from as-cast Tensile Test Bars of Mg-alloys (pages 501–506)

      M. Wessén and H. Cao

    81. Chapter 80

      Understanding the Corrosion Mechanism: A Framework for Improving the Performance of Magnesium Alloys (pages 507–516)

      Guangling Song and Andrej Atrens

    82. Chapter 81

      Potentiodynamic Studies of Some AZ and ZA Magnesium Alloys in Different Corrosive Media (pages 517–523)

      Mustafa Özgür Öteyaka, Anne-Marie Lafront, Edward Ghali and Réal Tremblay

    83. Chapter 82

      Plating of Magnesium — New Developments (pages 524–528)

      Peter Gregg

    84. Chapter 83

      Surface Treatment of Magnesium Substrates (pages 529–533)

      Michael Walter

    85. Chapter 84

      Approach to Control the Corrosion of Magnesium by Alloying (pages 534–539)

      V. Kaesel, P.-T. Tai, Fr.-W. Bach, H. Haferkamp, F. Witte and H. Windhagen

    86. Chapter 85

      Magnesium Alloys Protection by Microplasmic Processing (pages 540–543)

      Belozerov Valeriy, Isakov Sergey, Makhatilova Anna and Subbotina Valeriya

    87. Chapter 86

      Class a Surface Quality for Magnesium Diecastings Using Ceramic Precursor-Based Coatings (pages 544–547)

      R. Gadow, D. Scherer and C. C. Stahr

    88. Chapter 87

      Wear and Corrosion Resistant Ceramic-Based Multilayer Coatings with Dry Lubrication Ability (pages 548–552)

      R. Gadow, D. Scherer and C. C. Stahr

    89. Chapter 88

      New Generation of Keronite Process for Corrosion Protection of Magnesium (pages 553–558)

      S. Hutchins, P. Shashkov, V. Samsonov and A. Shatrov

    90. Chapter 89

      Corrosion Properties of PVD-Coated Magnesium Die Cast Alloy AZ91D – Part I: Investigation of the Corrosion Properties and the Corrosion Mechanisms of PVD Coated Magnesium Die Cast Alloy AZ91 for Tribological Applications (pages 559–567)

      H. Hoche, C. Blawert, E. Broszeit and C. Berger

    91. Chapter 90

      Application of Magnesium Alloys Coated with High Purity Mg for Engineering Usage (pages 568–573)

      A. Yamamoto, R. Tamai and H. Tsubakino

    92. Chapter 91

      Corrosion and Fatigue Behaviour of the Magnesium Die-Cast Alloy AZ91 hp after Surface Treatment (pages 574–579)

      C. Dindorf and C. Müller

    93. Chapter 92

      Corrosion Behaviour in Artificially Corrosion-Oxidation Treated Mg Alloys (pages 580–585)

      A. Yamamoto, H. Inaoka and H. Tsubakino

    94. Chapter 93

      Corrosion and Oxidation of Thixomolded Magnesium Alloys (pages 586–591)

      Claudia Pieper, Uwe Köster, Helena Alves and Isao Nakatsugawa

    95. Chapter 94

      Plasma Electrochemical Synthesis of Protective Coatings on WE54 Magnesium Alloy (pages 592–598)

      A. Berkani, P. Skeldon, G.E. Thompson, K. Shimizu, H. Habazaki, H. Karimzadeh, K. Stevens and C. John

    96. Chapter 95

      Galvanic Corrosion of Magnesium Alloy AZ91 with Coated Elements (pages 599–604)

      E. Boese, J. Goellner, A. Heyn and St. Eisenberg

    97. Chapter 96

      Corrosion Protection by Conductive Polymers for Magnesium Alloys (pages 605–610)

      A. Yfantis, I. Paloumpa, D. Schmeißer and D. Yfantis

    98. Chapter 97

      Plasma Hydrogenation of Mg-Based Alloy Films Under High-Flux, Low Energy Ion Irradiation at Elevated Temperatures (pages 611–616)

      L. L. Pranevicius, D. Milcius and G. Thomas

    99. Chapter 98

      The Corrosion Performance of Sealed KERONITE Coatings on AZ91D Magnesium Alloy (pages 617–622)

      S. Hutchins, S. Shrestha, A. Sturgeon, P. Shashkov and A. Shatrov

    100. Chapter 99

      Corrosion Properties of PVD-Coated Magnesium Die Cast Alloy AZ91D – Part II: Contact Corrosion Properties of Differently PVD Treated Magnesium Die Cast Alloy AZ91 (pages 623–631)

      H. Hoche, C. Blawert, E. Broszeit and C. Berger

    101. Chapter 100

      Corrosion Stress Relaxation in Magnesium Alloys (pages 632–637)

      Ya. Unigovski, L. Riber, A. Eliezer and E. M. Gutman

    102. Chapter 101

      Effect of Small Ca-additions on the Corrosion Resistance of AS41-Mg Alloy (pages 638–645)

      Volkmar Neubert and Ashraf Bakkar

    103. Chapter 102

      Contribution to the Study of Electrochemical Corrosion of Alloy AZ91 in Selected Environment (pages 646–648)

      S. Lasek, L. Čížek and L. Pawlica

    104. Chapter 103

      Study on Effects of RE, Ca Addition on Stress Corrosion Cracking Behaviour of Magnesium Alloys (pages 649–654)

      Z.L. Wei, Q.R. Chen, X.C. Guo, L. Yang, N.X Xiu and Y.W. Huang

    105. Chapter 104

      Comparison of the Corrosion Behaviour Between Two Magnesium Alloys by Electrochemical Noise and Scanning Reference Electrode Technique (pages 655–660)

      Robert D. Klassen, Pierre R. Roberge, Anne-Marie Lafront, Mustafa Ö. Öteyaka and Edward Ghali

    106. Chapter 105

      Role of Manganese in the Soldering Reaction in Magnesium High Pressure Die Casting (pages 661–668)

      C. Tang, M. Jahedi and M. Brandt

    107. Chapter 106

      Extended Casting Simulation for Improved Magnesium Die Casting (pages 669–674)

      Erik Hepp, Otto Lohne and Stian Sannes

    108. Chapter 107

      Vertical Direct Chill (VDC) Casting of Magnesium — Optimized Casting Parameters and Safety Issues (pages 675–680)

      Franka Pravdic, Dietmar Leitlmeier, Christian Wögerer, Gerhard Traxler and Herbert Hubbauer

    109. Chapter 108

      Innovative Magnetohydrodynamical Effect Use in Casting Magnesium Alloys (pages 681–687)

      Viktor I. Dubodelov, Vladimir G. Tkachenko, Vladimir A. Seredenko and Viktor K. Pogorsky

    110. Chapter 109

      Magnesium New Rheocasting as an Industrial Process: An Update of Recent Developments (pages 688–693)

      Werner Fragner, Helmut Kaufmann, Helmut Helmberger and Ralph Potzinger

    111. Chapter 110

      Influence of Process Parameters on the Microstructure and Mechanical Properties of Magnesium Die Castings (pages 694–699)

      C. Pitsaris, T. Abbott, C.H.J. Davies and G. Savage

    112. Chapter 111

      Residual Stresses in Thin-walled Hot Chamber Die Cast AZ91d; an Experimental Study (pages 700–705)

      Anders Eric Wollmar Jarfors, Tan Ming Jen and Jonas. Bäckman

    113. Chapter 112

      A New Zirconium-Rich Master Alloy for the Grain Refinement of Magnesium Alloys (pages 706–712)

      Ma Qian, D. H. StJohn and M. T. Frost

    114. Chapter 113

      A Manufacturing Technology of AZ91-Alloy Slurry for Semi Solid Forming (pages 713–718)

      Ji-Young Byun, Soon Il Kwon, Heon Phil Ha and Jin-Kook Yoon

    115. Chapter 114

      Characterization and Removal of Die Lubricant Residue on Magnesium Die Castings (pages 719–724)

      Jan Ivar Skar, Robert Orr, Arne Henriksen, Heike Thamerus and Jochen Caster

    116. Chapter 115

      Magnesium Die Casting for High Performance (pages 725–731)

      Stian Sannes, Haavard Gjestland, Håkon Westengen, Hans Ivar Laukli and Otto Lohne

    117. Chapter 116

      Influence of Direct Chill Casting Parameters on a Magnesium Alloy (pages 732–737)

      D. Ludlow, G.W. Lorimer, J-C. Gebelin, W.D. Griffiths, J. King, T. Wilks and K. Savage

    118. Chapter 117

      Injection Molding of Magnesium Alloys (pages 738–743)

      Andreas Lohmüller, Martin Scharrer, Ralf Jenning, Michael Hilbinger, Mark Hartmann and Robert F. Singer

    119. Chapter 118

      Molten Metal Jets Lamination at Pouring into Casting Molds (pages 744–745)

      A.I. Kulinsky

    120. Chapter 119

      Non-Destructive Testing of Cast Magnesium Alloys by Computerized Tomography (pages 746–751)

      Dr. Bernhard Illerhaus, Dr. Norbert Hort, Dr. Carsten Potzies, Hagen Frank and Dr. Jürgen Goebbels

    121. Chapter 120

      Investment Casting of Magnesium (pages 752–757)

      M. Rosefort, S. Korte and A. Bührig-Polaczek

    122. Chapter 121

      Cast Magnesium Alloys and Technological Processes for Casting Production (pages 758–766)

      I.Y. Mukhina, I.E. Kovalev, I.N. Fridlyander and I. N. Vasiliev

    123. Chapter 122

      Rheo-Container-Process (RCP): New Semisolid Forming Method for Light Metal Alloys (pages 767–773)

      Julio Aguilar, Tilman Grimming and Andreas Bührig-Polaczek

    124. Chapter 123

      Thin Slab Casting as a New Possibility for Economic Magnesium Sheet Metal Production (pages 774–782)

      Heinz Palkowski and Lutz Wondraczek

    125. Chapter 124

      Duplex Process: Crucible Furnace — Salt-Heated Furnace is an Effective Process of Making Magnesium Alloys (pages 783–788)

      I.A. Barannik and I.M. Komelin

    126. Chapter 125

      Development of a PAM-CRASH Material Model for Die Casting Alloys (pages 789–802)

      Lars Greve

    127. Chapter 126

      Integrated Model for Calculating Microstructural and Forming Parameters of Magnesium Alloy AZ31 during Hot Rolling (pages 803–810)

      R. Kawalla, N. Coung and A. Stolnikov

    128. Chapter 127

      Advanced Die Casting Simulation for a Systematical Development of Magnesium Structural Components (pages 811–816)

      Christoph Schendera, Simone Schwarz, Martin Möser and Thorsten Müller

    129. Chapter 128

      Fatigue Simulation of Light Weight Components of Magnesium (pages 817–822)

      Ulrich May and Antje Berg-Pollack

    130. Chapter 129

      Product Development Process Optimization by Linking Design, Numerical Simulation and Process Development (pages 823–834)

      Elke Lieven and Moritz Wuth

    131. Chapter 130

      Calculation of Phase Dissolution and Homogenisation after Non-Equilibrium Solidification in MgAlZn Alloys (pages 835–841)

      Eva Cyrener, Eileen Clauss and Jörg Buchner

    132. Chapter 131

      Solidification Curves of AZ-Magnesium Alloys Determined by DSC Experiments and Heat-Transfer Model (DSC-HTM) (pages 842–847)

      Djordje Mirković, Joachim Gröbner and Rainer Schmid-Fetzer

    133. Chapter 132

      Numerical Simulation of Magnesium Alloy Sheet in Thermal Deep-drawing Process (pages 848–853)

      Shi-Hong Zhang, Kun Zhang, Zhong-Tang Wang, Chuan-Fu Yu, Yi Xu and Ke Yang

    134. Chapter 133

      Machinability Investigations of Fibre Reinforced Magnesium (pages 854–859)

      Klaus Weinert and Matthias Lange

    135. Chapter 134

      Thermal Spraying of Magnesium Alloys for Corrosion and Wear Protection (pages 860–868)

      Erich Lugscheider, Maria Parco, Prof. Dr. K. U. Kainer and N. Hort

    136. Chapter 135

      Welding of Magnesium Alloy AZ91C by CO2 Laser and by Friction Stir Welding (pages 869–874)

      P. Volovitch, M. Dhahri, J.-E. Masse, L. Barrallier, T. Baudin, B. DaCosta and J.C. Goussain

    137. Chapter 136

      Investigations of High-Productivity Methods for Joining Magnesium Sheet (pages 875–880)

      Jerry E. Gould and Wayne L. Chuko

    138. Chapter 137

      High Speed Minimum Quantity Lubrication Machining of Magnesium (pages 881–887)

      Franz Obermair and Günther Klammer

    139. Chapter 138

      Safe and Economically Efficient Use of Coolants in Mechanical Processing of Magnesium Alloys (pages 888–894)

      Stefan Joksch

    140. Chapter 139

      Safe Machining of Magnesium Parts by Cutting and Burnishing Operations (pages 895–901)

      B. Denkena, J. C. Becker, C. Podolsky and A. Kuhlmann

    141. Chapter 140

      Development of a Flux Free Soldering Technology for Magnesium Alloys (pages 902–907)

      Bernhard Wielage and Silke Mücklich

    142. Chapter 141

      Fatigue Strengh of Welded Wrought Magnesium Alloys (pages 908–916)

      B. Kleinpeter, M. Rethmeier, H. Wohlfahrt and K. Dilger

    143. Chapter 142

      Friction Welding of Magnesium: Microstructural Characterization (pages 917–923)

      A.L. Bowles, N. Hort, A. Meyer, J. F. dos Santos and Prof. Dr. K. U. Kainer

    144. Chapter 143

      Module Design Concept for Lightweight Automotive Seats (pages 924–929)

      Young Jin Ko, Jae Joong Kim, Soon Chan Park, Jong Myung Kim and Jong Dae Lim

    145. Chapter 144

      Cast Magnesium Safety Components - Energy Absorption Capacity (pages 930–935)

      C. Dørum, O.S. Hopperstad, O.-G. Lademo, M. Langseth and S. Sannes

    146. Chapter 145

      Application of Mg Sheets in Car Body Structures (pages 936–942)

      F. Moll, M. Mekkaoui, S. Schumann and H. Friedrich

    147. Chapter 146

      Experimental Comparison of Automotive Oil Pans: Creep Resistant Magnesium Alloy vs. Aluminum Alloy (pages 943–948)

      P. Vert, X.P. Niu, E. Aghion and A. Stickler

    148. Chapter 147

      Approaches to Use Magnesium as Structural Material in Car Body (pages 949–954)

      Volker Kaese, Lars Greve, Sven Jüttner, Martin Goede, Soenke Schumann, Horst Friedrich, Werner Holl and Werner Ritter

    149. Chapter 148

      Magnesium sheets for industrial application (pages 955–961)

      S. Bräunig, M. Düring, H. Hartmann and B. Viehweger

    150. Chapter 149

      Magnesium in Automotive Lightweight Design under Life Cycle Aspects (pages 962–967)

      Julia Pflieger, Matthias Fischer, Jürgen Stichling and Peter Eyerer

    151. Chapter 150

      Drawn Magnesium Wire for Robotic Welding and for Mechanical Applications (pages 968–973)

      Peter Baumgart (Sp)

    152. Chapter 151

      Recycling Towards Quality Excellence. A Cost Efficient Solution (pages 974–979)

      Juan Gómez- Cordobés

    153. Chapter 152

      Application of Remelted Post Consumer Scrap for Structural Magnesium Parts (pages 980–987)

      Christiane Scharf, Carsten Blawert and André Ditze

    154. Chapter 153

      Techniques for Recycling of Magnesium Scrap (pages 988–994)

      G. Hanko, C. Lochbichler, W. Riederer and G. Macher

    155. Chapter 154

      Industrial Application of the AMCover Cover Gas System for Magnesium Melt Protection (pages 995–1000)

      Simon Cashion, Nigel Ricketts and Rob Bailey

    156. Chapter 155

      Environmental Friendly Protection System for Molten Magnesium (pages 1001–1005)

      F.-W. Bach, A. Karger and Ch. Pelz

    157. Chapter 156

      New Perspectives with Magnesium Sheet (pages 1006–1012)

      Peter Juchmann and Sébastien Wolff

    158. Chapter 157

      Experiment and Simulation for Optimisation of Production and Usage Qualification of Magnesium Components — Objectives and Results of the Fraunhofer Alliance »Magnesium Light Weight Construction« (pages 1013–1019)

      Johann Georg Blauel, Thomas Götz and Jens Standfuss

    159. Chapter 158

      Solidification Morphology and Shrinkage Behavior of Mg-Alloys in Chill- and Sand Casting (pages 1020–1025)

      A. Hennings, E. Schaberger-Zimmermann and A. Bührig-Polaczek

    160. Chapter 159

      InMak – Innovative Magnesium Combined Structures for Car Bodies (pages 1026–1033)

      J.-F. Lass, A. Metz, M. Wappelhorst, E. Hombergsmeier, H. Lanzerath, P. Baumgart and P. Cordini

    161. Chapter 160

      Research Activities on Magnesium Alloys at Seoul National University, Korea (pages 1034–1039)

      Kwang Seon Shin

    162. Chapter 161

      Mg-Chassis — Advanced Manufacturing Technology for Automotive Chassis Components through Extensible and Sustainable Use of Mg Alloys (pages 1040–1045)

      Alexandra Ziese, Gerald Rausch, Dirk Lehmhus and Thorsten Müller

    163. Chapter 162

      The MAGNEXTRUSCO project: European Community Research on Hydrostatic Extrusion of Magnesium (pages 1046–1051)

      W.H. Sillekens and J. Bohlen

    164. Chapter 163

      Static Recrystallisation and Textural Changes in Warm Rolled Pure Magnesium (pages 1052–1057)

      Ravi Kumar Nadella, Indradev Samajdar and Günter Gottstein

    165. You have free access to this content
      Author Index (pages 1059–1064)

SEARCH