Ceramics - Processing, Reliability, Tribology and Wear, Volume 12

Copyright © 2000 Wiley-VCH Verlag GmbH

Ceramics - Processing, Reliability, Tribology and Wear, Volume 12

Editor(s): G. Müller

Published Online: 27 APR 2006

Print ISBN: 9783527301942

Online ISBN: 9783527607297

DOI: 10.1002/3527607293

About this Book

Product Information

About The Product

Today the development of technical ceramics is mostly oriented towards a better control of the microstructure and resulting properties of these materials. New forms of powders and microstructures are developed to enable the usage of ceramics in new application areas.
This goal may be reached by producing accurately reproducible reactive powders, development of adapted sintering processes, and by introducing new forms of composites. In addition, new methods offer new opportunities for materials development.

Table of contents

    1. You have free access to this content
      Front Matter (pages I–XIII)

  2. Part I: Ceramics Processing

    1. Supercritical Extraction of Binders from Green Ceramic Compacts (pages 1–10)

      T. Chartier, E. Delhomme, J. F. Baumard, Ph. Marteau and R. Tufeu

    2. Ceramic Oxide (MeO2) Solid Solutions Obtained by Mechanical Alloying (pages 11–16)

      Federica Bondioli, Paolo Veronesi, Cristina Leonelli and Tiziano Manfredini

    3. Effects of Sintering Atmosphere and Sintering Time on Gas Emission Behavior of Alumina During Fracture under Ultrahigh Vacuum (pages 17–22)

      M. Matsumoto, S. Kitaoka, H. Matsubara, S. Kuramoto and M. Kanno

    4. Influence of Magnesia on Sintering of Transition Alumina (pages 23–28)

      C. Legros, F. Herbst and C. Carry

    5. High-Performance Composite Ceramics with AlN Matrix (pages 29–34)

      Reiner Schober and Enrico Mählig

    6. The Use of Coalescence in Microstructural Design (pages 35–39)

      Jens Adam and Rainer Telle

    7. Microstructure of Boride Ceramics in the Ternary System TiB2-WB2-CrB2 (pages 40–44)

      Clemens Schmalzried and Rainer Telle

    8. Ceramic Composites from Bioorganic Derived Materials (pages 45–49)

      Heino Sieber and Peter Greil

    9. Materials and Processing for Ceramic Flat Membranes (pages 50–55)

      Jörg Adler, Reinhard Lenk and Hans-Jürgen Richter

    10. Dependence of the Mechanical Properties on Low Nano-SiC Particle Content of Hot Pressed Alumina (pages 56–62)

      Matthias Wilhelm and Werner Wruss

    11. Synthesis, Processing and Sintering of Nanosized Alpha Alumina Powder (pages 63–68)

      G. R. Karagedov

    12. Stereolithography for Ceramic Part Manufacturing (pages 69–74)

      F. Doreau, C. Chaput and T. Chartier

    13. Rapid Manufacturing of Ceramic Microcomponents (pages 75–80)

      Regina Knitter, Werner Bauer, Britta Linner-Krc̆mar and Edgar Hansjosten

    14. Pressure Casting of SiC Suspensions (pages 81–86)

      Holger von Both, Matthias Thommes, Rainer Oberacker and Michael J. Hoffmann

    15. Material and Technology Development for Microwave Sintering of High Performance Ceramics (pages 87–93)

      M. Willert-Porada, W. Bartusch, G. Dhupia, G. Müller, A. Nagel and G. Wötting

    16. Microstructure of Sinters Produced from Al-Ni-Al2O3 Composite Powders (pages 94–98)

      Anita Olszówka-Myalska, Bolesław Formanek, Adolf Maciejny and Krzysztof Szopiński

    17. Processing and Properties of Fiber Reinforced Reaction Bonded Silicon Nitride (RBSN) (pages 99–107)

      Andreas Herzog and Gerhard Woetting

    18. A Novel CMC Material for Train Brake Systems (pages 108–113)

      Zbigniew S. Rak

    19. Reactive Spray Forming as a Novel Process for the Production of Ceramic Components (pages 114–119)

      Meinhard Kuntz, Stephan Dierkes and Georg Grathwohl

    20. Thermal Analysis of Si-C-N Ceramics Derived from Polysilazanes (pages 120–126)

      Jianqiang Peng, Hans Jürgen Seifert and Fritz Aldinger

    21. Surface Modification of Mica with TiO2 Powders Prepared by Alkoxide Hydrolysis Method (pages 127–133)

      Sang–Pil Han, Sang-Hoon Lee and Sung-Churl Choi

    22. Indirect Characterization of Modified Silicon Nitride Powders by Chromatography (pages 134–138)

      Siegfried Vieth, Elke Mitzner and Dietmar Linke

    23. Studies Upon Automated Manufacturing of Tubes with Thick Superalumina Ceramic Walls Destined for Electronics and Electrotechnique Industries (pages 139–144)

      Constantin S. Dumitru, Mihai E. Mangra and Horatiu I. Niciu

    24. Rapid Prototyping of Complex-Shaped Parts of Si/SiC-Ceramics by Laser Sintering (pages 145–149)

      Wolfgang Löschau and Reinhard Lenk

    25. Large Alumina Parts from an Aqueous Suspension: Hydrolysis Assisted Solidification (HAS) (pages 150–155)

      Saša Novak and Tomaž Kosmač

    26. Micro Powder Injection Molding (pages 156–160)

      Volker Piotter, Tobias Benzler, Thomas Gietzelt, Robert Ruprecht and Jürgen Haußelt

    27. Study of Sintering of Oxide Ceramics at Constant Rate of Heating and by means of Rate-Controlled Sintering Method (pages 161–166)

      Karel Maca, Hynek Hadraba and Jaroslav Cihlar

    28. Rheology of Water-Based Tape Casting Slurries (pages 167–171)

      Bernd Bitterlich, Christiane Lutz and Andreas Roosen

    29. Liquid Phase Sintered SiC with SiO2 Additive (pages 172–177)

      Haihui Ye, Georg Rixecker and Fritz Aldinger

    30. Pressureless Sintering of Alumina-Glass Composites (pages 178–183)

      Maria Margarida Lima and Regina Monteiro

    31. Processing of Mullite Ceramics Using Fly Ash and Alumina (pages 184–188)

      N. Quaranta, S. Camelli, M. Caligaris, E. Benavidez, R. Caligaris, A. R. Boccaccini and H. Kern

    32. High Temperature Behaviour of Liquid Phase Sintered Silicon Carbide (pages 189–194)

      Giuseppe Magnani, Gian Loris Minoccari and Luigi Pilotti

    33. Experimental Verification of Mechanical Properties – Porosity Relationships for Porous Silicon Carbide Materials (pages 195–200)

      C. Reynaud and F. Thevenot

    34. Processing of SiC-Ceramics with Cellular Microstructure (pages 201–206)

      Christiane Hoffmann, Annette Kaindl, Heino Sieber and Peter Greil

    35. The Conversion Process of Cellulose Fiber into Ceramic Fibers (pages 207–212)

      Evelina Vogli, Holger Friedrich, Heino Sieber and Peter Greil

    36. Preparation and Properties of Novel Nb- and Ti-Based Metal Reinforced Alumina Composites with Interpenetrating Microstructure (pages 213–218)

      R. Günther, T. Klassen, B. Dickau, F. Gärtner, A. Bartels and R. Bormann

    37. Study of Structure and Some Properties of Whiskerizated Silicon Carbide Fibers (pages 219–222)

      L. R. Vishnyakov, V. A. Dubok, L. N. Pereselentseva and K. L. Vishnyakova

    38. In-situ Tensile Testing of SiCp-Al Metal Matrix Composite Produced by Laser Embedding (pages 223–228)

      Václav Ocelík, Arjan Vreeling, Yutao Pei and Jeff Th. M. De Hosson

    39. Elaboration of Ceramics Composites in the System Alumina-Mullite-Zirconia (pages 229–234)

      F. Belnou, D. Gœuriot, F. Valdivieso and F. Thevenot

    40. Microstructural Development and High Frequency Characterization of Bulk YBa2Cu3O7–x Superconductors (pages 235–240)

      A. Brendel and R. Heidinger

    41. Structural, Electrical and Magnetic Properties of (Y1–yCay)Ba2Cu3–x NixO7–δ Ceramics (pages 241–246)

      Iosif Gr. Deac, Emil Burzo, Viorel Pop and Romulus Tetean

    42. Formation and Properties of Poly(siloxane) Derived Ceramic Foams (pages 247–251)

      T. Gambaryan-Roisman, M. Scheffler, T. Takahashi, P. Buhler and P. Greil

    43. Development of Advanced High-Temperature Vacuum Furnaces (pages 252–255)

      Gerhard Rothlauf, Vitaliy Petrovich Grictenko, Vladimir Dmitrievich Karpenko, Sergey Aleksandrjvich Uvarov, Vadim Arkadievich Borkovskih and Natalia Nikolaevna Borkovskih

    44. New Aluminium/Carbon-Based Ceramic Compounds (pages 256–260)

      Falko D. Meyer and Harald Hillebrecht

    45. Large-Scale Ceramic Composite Structures via Near-Net-Shape Processing of Carbon Preforms (pages 261–265)

      C. Müller, S. Walter, U. Papenburg and W. Pfrang

  3. Part II: Ceramics Processing at Low Temperatures

    1. Colloidal Processing of Nanocrystalline Cerium Oxide (pages 267–273)

      Andreas Tschöpe, Jürgen Markmann and Rainer Birringer

    2. Direct Coagulation Casting and Gel-Casting: Two Innovative Ceramic Forming Technologies (pages 274–281)

      Wolfgang Burger, Andreas Krell, Dietrich Stock and Lutz Claes

    3. Molecular Routes to Advanced Materials: Synthesis of NdAlO3 Ceramic and NdAlO3/Al2O3 Composite From Single Source Precursors (pages 282–288)

      Sanjay Mathur, Michael Veith, Nicolas Lecerf, Nicole Donia, Volker Huch, Hao Shen and Stefan Hüfner

    4. Deposition of Titania Thin Films on Different Functionalized Organic Self-Assembled Monolayers (pages 289–294)

      Thomas P. Niesen, Joachim Bill and Fritz Aldinger

    5. Effect of Li, Ca and Sn Doping on Anatase Stability (pages 295–301)

      Xim Bokhimi, Antonio Morales, Manuel Aguilar and Amado García-Ruiz

    6. Contribution to the Determination of Residual Stresses in Carbon-long-fibre-reinforced Ceramics (pages 302–306)

      Bernhard Wielage and Uta Zesch

    7. Influence of Al Reactive Filler on the Carbon Redistribution During Pyrolysis of Poly (Siloxanes) (pages 307–311)

      M. Scheffler, P. Buhler and P. Greil

    8. Elaboration of Low Temperature and Shrinkage Mullite Derived from Filled Siloxane (pages 312–317)

      Thibaut Michalet, Michel Parlier and Jacques Crampon

    9. Direct Electroless Plating of ZrO2 Powder (pages 318–323)

      G. Wen, Z. X. Guo and C. K. L. Davies

    10. Structural Evolution of a Stoichiometric Silicon Oxycarbide from Gel Through Glass to Decomposition (pages 324–329)

      H. Brequel, L. Schiffini and S. Enzo

  4. Part III: Reliability

    1. Reliability of Ceramic Valve Plates for Common-Rail Injection Pumps (pages 331–342)

      R. Speicher, G. A. Schneider, W. Dreßler, G. Lindemann, H. Böder and V. Knoblauch

    2. Failure Mechanisms During Thermal Shock Testing of Advanced Ceramics by Means of Lamp Irradiation (pages 343–352)

      V. Knoblauch, G. A. Schneider, W. Dreßler, H. Böder, G. Schneider, R. Speicher and L. Jeannel

    3. Design and Production of High Reliability Soda-lime Silicate Glass (pages 353–358)

      Vincenzo M. Sglavo and Marco Bonafini

    4. High Temperature Mechanical Properties of Si-B-C-N Precursor-Derived Amorphous Ceramics (pages 359–364)

      Martin Christ, Martin Günter, Joachim Bill and Fritz Aldinger

    5. Testing of Ceramics and Glasses by Indentation Techniques (pages 365–377)

      Vincenzo M. Sglavo

    6. Indentation Induced t- and m-Phase Orientation in ZrO2 (pages 378–384)

      Michael Dorn and Klaus Georg Nickel

    7. Influence of the Processing on the Mechanical Properties of Precursor-Derived Si-C-N Ceramics (pages 385–391)

      Arndt Bauer, Günter Thurn, Joachim Bill and Fritz Aldinger

    8. Aqueous Corrosion of Advanced Ceramics (pages 392–397)

      Ralf Westerheide, Thomas Hollstein and Manfred Füting

    9. Defect Analysis in Ceramics by Microwaves (pages 398–403)

      H. Dannheim and H. Hädrich

    10. Fracture Toughness of Thermally Shocked SiC-Fibre Reinforced Glass Matrix Composite (pages 404–409)

      Ivo Dlouhý, Michal Reinisch and Aldo R. Boccaccini

    11. Annealing Induced Changes in Fracture Behaviour of Bulk Plasma-sprayed Alumina (pages 410–415)

      R. J. Damani

  5. Part IV: Tribology and Wear

    1. Wear Mechanisms and Influence of Humidity on the Tribological Behaviour of SSiC Ceramic under Unidirectional Sliding (pages 417–424)

      R. Blattner and K.-H. Zum Gahr

    2. Surface Modified Alumina Ceramic for Unlubricated Tribological Applications (pages 425–430)

      J. Schneider, K. Przemeck, I. Lenke and K.-H. Zum Gahr

    3. Surface Engineering to Improve Tribological Performance of Gamma Based Titanium Aluminides (pages 431–442)

      Ahmad Reza Rastkar and Tom Bell

    4. Assessment and Optimization of Tribological Systems (pages 443–448)

      Wulf Pfeiffer, Bernhard Blug and Martin Zimmermann

    5. Hybrid- and Ceramic Rolling Bearings with Modified Surface and Low Friction Rolling Contact (pages 449–454)

      M. Popp, R. Sternagel, W. Pfeiffer, B. Blug, S. Meier, G. Wötting and L. Frasseck

    6. Development of C/C-SiC Materials for Friction Applications (pages 455–460)

      B. Heidenreich and W. Krenkel

    7. Tribological Phenomena in the Outer Layer of Friction Linings Containing Composite Waste Materials (pages 461–466)

      Jerzy Myalski and Józef Śleziona

    8. Wear Behaviour of Ceramics-Metal Couples for Water Hydraulics Applications (pages 467–473)

      E. Bombonato, L. Ceschini, G. L. Garagnani, G. Magnani and V. Miozza

    9. Dynamic Friction of Carbon-Ceramic Couples (pages 474–479)

      P. Vantomme, P. Deprez, J. F. Coutouly, A. Deffontaine, A. Placet and D. Gaillot

    1. You have free access to this content
      Author Index (pages 481–483)

    1. You have free access to this content
      Subject Index (pages 485–489)

SEARCH