Encyclopedia of Structural Health Monitoring

Encyclopedia of Structural Health Monitoring

Online ISBN: 9780470061626

DOI: 10.1002/9780470061626

Editors & Contributors


Editors-in-Chief

 

Christian Boller

Saarland University & Fraunhofer Institute for Non-Destructive Testing

Saarbrücken

Germany

 

(and formerly of The University of Sheffield, Sheffield, UK)

 

Fu-Kuo Chang

Stanford University

Stanford, CA

USA

 

Yozo Fujino

University of Tokyo

Tokyo

Japan

Subject Editors

 

PHYSICAL MONITORING PRINCIPLES

Douglas E. Adams

Purdue University

West Lafayette, IN

USA

 

SIGNAL PROCESSING

Wieslaw J. Staszewski

and Keith Worden

University of Sheffield

Sheffield

UK

 

SIMULATION

Srinivasan Gopalakrishnan

Indian Institute of Science

Bangalore

India

 

SENSORS

Victor Giurgiutiu

University of South Carolina

Columbia, SC

USA

 

SYSTEMS AND SYSTEM DESIGN

Daniel L. Balageas

ONERA (The French Aerospace Lab)

Châtillon

France

 

PRINCIPLES OF SHM-BASED STRUCTURAL MONITORING, DESIGN AND MAINTENANCE

Michael K. Bannister

CRC-ACS

Melbourne, VIC

Australia

 

AEROSPACE APPLICATIONS

Stephen C. Galea

Defence Science and Technology Organisation

Melbourne, VIC

Australia

 

CIVIL ENGINEERING APPLICATIONS

Helmut Wenzel

VCE Holding GmbH

Vienna

Austria

 

OTHER APPLICATIONS

Daniel J. Inman

Virginia Tech

Blacksburg, VA

USA

Contributors

Masato Abe
BMC Corporation, Mihama-Ku, Chiba, Japan

Jandro Abot
Aerospace Engineering, University of Cincinnati, Cincinnati, OH, USA

Günther Achs
VCE--Vienna Consulting Engineers, Vienna, Austria

Jason Agius
Directorate General Technical Airworthiness, RAAF Williams, VIC, Australia

A. Emin Aktan
Drexel Intelligent Infrastructure Institute, Drexel University, Philadelphia, PA, USA

John C. Aldrin
Computational Tools, Gurnee, IL, USA

Bashir Ali
Department of Mechanical and Chemical Engineering, North Carolina A&T State University, Greensboro, NC, USA

Daniel L. Balageas
Structure and Damage Mechanics Department, ONERA (The French Aerospace Lab), Châtillon, France

Peter R. Bannister
Department of Engineering Science, University of Oxford, Oxford, UK

Robert J. Barthorpe
Department of Mechanical Engineering, University of Sheffield, Sheffield, UK

Ivan Bartoli
Department of Structural Engineering, University of California, San Diego, CA, USA

Duncan P. Barton
Structural Monitoring Systems Ltd., Perth, WA, Australia

Michèle Basseville
IRISA, Campus de Beaulieu, Rennes, France

Biswajit Basu
Department of Civil, Structural and Environmental Engineering, Trinity College Dublin, Dublin, Ireland

Jan Bauer
Leichtweiss-Institute, Department of Waste and Resource Management, Technical University of Braunschweig, Braunschweig, Germany

Shawn J. Beard
Acellent Technologies, Inc., Sunnyvale, CA, USA

Nicholas C. Bellinger
Institute for Aerospace Research, National Research Council Canada, Ottawa, Ontario, Canada

Reinhard Bischoff
Structural Engineering Research Laboratory, Empa, Swiss Federal Laboratories for Materials Testing and Research, Dübendorf, Switzerland

James L. Blackshire
Air Force Research Laboratory, Wright Patterson Air Force Base, Dayton, OH, USA

Scott M. Bland
Aerospace and Ocean Engineering, Virginia Polytechnic Institute and State University, Blacksburg, VA, USA

Mark Blodgett
Air Force Research Laboratory, Wright Patterson Air Force Base, Dayton, OH, USA

Christian Boller
Saarland University & Fraunhofer Institute for Non-Destructive Testing, Saarbrücken, Germany (and formerly of The University of Sheffield, Sheffield, UK)

David Boylan
Applied Research Laboratory, Pennsylvania State University, University Park, PA, USA

James M. W. Brownjohn
Department of Civil and Structural Engineering, University of Sheffield, Sheffield, UK

Thomas Bruder
Fraunhofer Institute for Structural Durability and System Reliability (LBF), Darmstadt, Germany

Matthias Buderath
Product Support, EADS Military Air Systems, Ottobrunn, Germany

Giacomo Buffarini
ENEA, Casaccia Research Centre, Rome, Italy

Elsa Caetano
Faculty of Engineering, University of Porto, Porto, Portugal

Reto Cantieni
rci dynamics, Duebendorf, Switzerland

F. Necati Catbas
Civil and Environmental Engineering Department, University of Central Florida, Orlando, FL, USA

Rosario Ceravolo
Dipartimento di Ingegneria Strutturale e Geotecnica, Politecnico di Torino, Torino, Italy

Carlos E. S. Cesnik
Department of Aerospace Engineering, University of Michigan, Ann Arbor, MI, USA

Abir Chakraborty
India Science Laboratory, General Motors R & D, Bangalore, India

Fu-Kuo Chang
Department of Aeronautics and Astronautics, Stanford University, Stanford, CA, USA

Yan-Cheong Chan
Electrical Engineering Department, City University, Kowloon, Hong Kong, China

Gyeongrak Choi
Korean Institute of Industrial Technology, Chonan-Si, South Korea

Jinkyo F. Choo
Department of Civil and Environmental Engineering, Seoul National University, Seoul, Korea

Sachit Chopra
Department of Chemical and Materials Engineering, University of Cincinnati, Cincinnati, OH, USA

Fulei Chu
Department of Precision Instruments and Mechanology, Tsinghua University, Beijing, China

Paolo Clemente
ENEA, Casaccia Research Centre, Rome, Italy

David A. Clifton
Department of Engineering Science, University of Oxford, Oxford, UK
and
Oxford BioSignals Ltd, Abingdon, UK

Stefano Coccia
Department of Structural Engineering, University of California, San Diego, CA, USA

Ivan Cole
Commonwealth Scientific and Industrial Research Organisation (CSIRO) Materials Science and Engineering, Clayton, VIC, Australia

Matthew D. Collette
SAIC Advanced Systems and Technology Division, Bowie, MD, USA

Penny Corrigan
Commonwealth Scientific and Industrial Research Organisation (CSIRO) Materials Science and Engineering, Clayton, VIC, Australia

Álvaro Cunha
Faculty of Engineering, University of Porto, Porto, Portugal

Len Davidson
Air Vehicles Division, Defence Science and Technology Organisation (DSTO), Melbourne, VIC, Australia

Guido De Roeck
Department of Civil Engineering, Katholieke Universiteit Leuven, Leuven, Belgium

Alessandro De Stefano
Politecnico di Torino, Torino, Italy

Thomas DeFiore
US Federal Aviation Administration, Atlantic City International Airport, NJ, USA

Thierry Denoeux
Université de Technologie de Compiègne, Compiègne, France

Mark M. Derriso
US Air Force Research Laboratory, Wright Patterson Air Force Base, OH, USA

Martin P. DeSimio
University of Dayton Research Institute, Dayton, OH, USA

Dimitri M. Donskoy
Stevens Institute of Technology, Hoboken, NJ, USA

Mike Duffield
QinetiQ, Farnborough, UK

Janice Dulieu-Barton
School of Engineering Sciences, University of Southampton, Southampton, UK

Frank Eichelbaum
IABG, Dresden, Germany

Kevin M. Farinholt
Engineering Institute, Los Alamos National Laboratory, Los Alamos, NM, USA

Charles R. Farrar
Engineering Institute, Los Alamos National Laboratory, Los Alamos, NM, USA

Spilios D. Fassois
Department of Mechanical and Aeronautical Engineering, University of Patras, Patras, Greece

Michael Feldman
Technion--Israel Institute of Technology, Haifa, Israel

Glauco Feltrin
Structural Engineering Research Laboratory, Empa, Swiss Federal Laboratories for Materials Testing and Research, Dübendorf, Switzerland

Peter Fleming
Rolls-Royce University Technology Centre, Department of Automatic Control and Systems Engineering, University of Sheffield, Sheffield, UK

Manuel A. Floriano
GEOCISA, Madrid, Spain

Peter Foote
BAE Systems, Advanced Technology Centre, Bristol, UK

Dan M. Frangopol
Department of Civil and Environmental Engineering, Lehigh University, Bethlehem, PA, USA

Bernd Frankenstein
Fraunhofer Institute for Nondestructive Testing (IZFP-D), Dresden, Germany

Klaus Fricke
Leichtweiss-Institute, Department of Waste and Resource Management, Technical University of Braunschweig, Braunschweig, Germany

Herbert Friedmann
Wölfel Beratende Ingenieure, Höchberg, Germany

Michael I. Friswell
Department of Aerospace Engineering, University of Bristol, Bristol, UK

Yozo Fujino
Department of Civil Engineering, University of Tokyo, Tokyo, Japan

Stephen C. Galea
Air Vehicles Division, Defence Science and Technology Organisation (DSTO), Melbourne, VIC, Australia

Ranjan Ganguli
Department of Aerospace Engineering, Indian Institute of Science, Bangalore, India

Tomasz Ga{\l}ka
Institute of Power Engineering, Warsaw, Poland

Daniel Gilbertson
Boeing Phantom Works, St. Louis, MO, USA

Victor Giurgiutiu
Mechanical Engineering Department, University of South Carolina, Columbia, SC, USA

Neil Goldfine
JENTEK Sensors, Inc., Waltham, MA, USA

Jean-Claude Golinval
Aerospace and Mechanical Engineering Department (LTAS), University of Liège, Liège, Belgium

Srinivasan Gopalakrishnan
Department of Aerospace Engineering, Indian Institute of Science, Bangalore, India

Grant A. Gordon
Research Technology Centre, Honeywell Inc., Phoenix, AZ, USA

Michael R. Gorman
Digital Wave Corporation, Englewood, CO, USA

Gangadhararao Grandhi
Department of Mechanical and Chemical Engineering, North Carolina A&T State University, Greensboro, NC, USA

Alten F. Grandt Jr.
School of Aeronautics and Astronautics, Purdue University, West Lafayette, IN, USA

Dave Grundy
JENTEK Sensors, Inc., Waltham, MA, USA

Andrzej Grzadziela
Faculty of Mechanical and Electrical Engineering, Naval University of Gdynia, Gdynia, Poland

Hong Guan
HDR, Los Angeles, CA, USA

Robert F. Guratzsch
Vanderbilt University, Nashville, TN, USA

Hua Gu
Advanced Structures Group, Caterpillar Production System Division, Caterpillar Inc., Peoria, IL, USA

Wolfgang R. Habel
Division VIII.1 Measurement and Testing Technology: Sensors, BAM Federal Institute for Materials Research and Testing, Berlin, Germany

Andrew Halfpenny
nCode International Ltd., Innovation Technology Centre, Rotherham, UK

Muhammad Haroon
Purdue University, West Lafayette, IN, USA

Rosemarie Helmerich
Division VIII.2 Non-destructive Damage Assessment and Environmental Measurement Methods, BAM Federal Institute for Materials Research and Testing, Berlin, Germany

Fritz-Otto Henkel
Wölfel Beratende Ingenieure, Höchberg, Germany

Wolfgang Hillger
German Aerospace Center (DLR), Braunschweig, Germany

Bruce Hinton
Air Vehicles Division, Defence Science and Technology Organisation (DSTO), Melbourne, VIC, Australia

Wei Huang
Intelligent Transportation Systems Research Centre, Southeast University, Nanjing, China

N. Hu
Department of Aerospace Engineering, Tohoku University, Sendai, Japan

Jeong-Beom Ihn
The Boeing Company, Advanced Structures Technology, Phantom Works, Seattle, WA, USA

Roy Ikegami
Acellent Technologies, Inc., Sunnyvale, CA, USA

Daniel J. Inman
Center for Intelligent Material Systems and Structures, Virginia Polytechnic Institute and State University, Blacksburg, VA, USA

Kumar V. Jata
Air Force Research Laboratory, Wright Patterson Air Force Base, Dayton, OH, USA

Xiaomo Jiang
Vanderbilt University, Nashville, TN, USA

Visakan Kadirkamanathan
Rolls-Royce University Technology Centre, Department of Automatic Control and Systems Engineering, University of Sheffield, Sheffield, UK

Jayabal Kaliappan
Department of Applied Mechanics, Indian Institute of Technology, Chennai, India

Inpil Kang
Division of Mechanical Engineering, Pukyong National University, Busan, South Korea

Rakesh K. Kapania
Aerospace and Ocean Engineering, Virginia Polytechnic Institute and State University, Blacksburg, VA, USA

Vistasp M. Karbhari
University of Alabama in Huntsville, Huntsville, AL, USA

Klaus Kerkhof
MPA Universität Stuttgart, Stuttgart, Germany

Gaëtan Kerschen
Aerospace and Mechanical Engineering Department (LTAS), University of Liège, Liège, Belgium

Do Hyung Kim
Research and Development, Lloyd's Register Asia, Busan, Korea

Myung Hyun Kim
Department of Naval Architecture and Ocean Engineering, Pusan National University, Busan, Korea

Sungkon Kim
Department of Structural Engineering, Seoul National University of Technology, Seoul, Korea

Dennis King
Rolls-Royce Civil Aero-Engines, Derby, UK

Steve King
Rolls-Royce Civil Aero-Engines, Derby, UK

Goutham R. Kirikera
Center for Quality Engineering and Failure Prevention, Northwestern University, Evanston, IL, USA

Wilhelm Kleinöder
AREVA NP GmbH, Erlangen, Germany

Thomas Klesse
Fraunhofer Institute for Nondestructive Testing (IZFP-D), Dresden, Germany

Hyun-Moo Koh
Department of Civil and Environmental Engineering, Seoul National University, Seoul, Korea

Marek Krawczuk
Institute of Fluid Flow Machinery, PAS, Gdansk, Poland
and
Faculty of Electrical and Control Engineering, Gdansk University of Technology, Gdansk, Poland

Thomas Krichel
Airbus, Hamburg, Germany

Amrita Kumar
Acellent Technologies, Inc., Sunnyvale, CA, USA

Narito Kurata
Kobori Research Complex, Kajima Corporation, Tokyo, Japan

Kasper Lambrighs
Department of Metallurgy and Materials Engineering, Katholieke Universiteit Leuven, Leuven, Belgium

Francesco Lanza di Scalea
Department of Structural Engineering, University of California, San Diego, CA, USA

Hae-Sung Lee
Department of Civil and Environmental Engineering, Seoul National University, Seoul, Korea

Michel B. Lemistre
Laboratoire SATIE/CNRS, Ecole Normale Supérieure de Cachan, Cachan, France

Dy Dinh Le
Federal Aviation Administration, Air Traffic Organization, William J. Hughes Technical Center, Atlantic City International Airport, NJ, USA

Irene Li
Acellent Technologies, Inc., Sunnyvale, CA, USA

Mark Lin
Department of Aeronautics and Astronautics, Stanford University, Stanford, CA, USA

Eric Lindgren
Air Force Research Laboratory, Wright Patterson Air Force Base, Dayton, OH, USA

Kenneth J. Loh
Department of Civil and Environmental Engineering, University of Michigan, Ann Arbor, MI, USA

Minh P. Luong
LMS CNRS UMR7649, Ecole Polytechnique, Palaiseau, France

Jerome P. Lynch
Department of Civil and Environmental Engineering, University of Michigan, Ann Arbor, MI, USA


Eric I. Madaras
NASA Langley Research Center, Hampton, VA, USA

Filipe Magalhães
Faculty of Engineering, University of Porto, Porto, Portugal

Sankaran Mahadevan
Vanderbilt University, Nashville, TN, USA

D. R. Mahapatra
Department of Aerospace Engineering, Indian Institute of Science, Bangalore, India

Gunjan Maheshwari
Department of Mechanical Engineering, University of Cincinnati, Cincinnati, OH, USA

Matthew C. Malkin
Phantom Works, Boeing, Seattle, WA, USA

Graeme Manson
Department of Mechanical Engineering, University of Sheffield, Sheffield, UK

Marcias Martinez
Institute for Aerospace Research, National Research Council Canada, Ottawa, Ontario, Canada

Alessandro Marzani
DISTART, University of Bologna, Bologna, Italy

Len Meadows
Transport and Surveillance Aircraft, Air Vehicles Division, Defence Science and Technology Organisation (DSTO), Fisherman's Bend, VIC, Australia

Enrique A. Medina
Radiance Technologies Inc., Dayton, OH, USA

Xiaolin Meng
Institute of Engineering Surveying and Space Geodesy, University of Nottingham, Nottingham, UK

Thomas B. Messervey
Department of Mathematical Sciences, United States Military Academy, West Point, NY, USA

Jonas Meyer
Structural Engineering Research Laboratory, Empa, Swiss Federal Laboratories for Materials Testing and Research, Dübendorf, Switzerland

Richard P. Micklos
PE, Warminster, PA, USA

Ayaho Miyamoto
Graduate School of Science and Engineering, Yamaguchi University, Ube, Japan

Ronald D. Moffitt
Institute for Advanced Learning and Research (IALR), Virginia Polytechnic Institute and State University, Danville, VA, USA

Loris Molent
Air Vehicles Division, Defence Science and Technology Organisation (DSTO), Melbourne, VIC, Australia

Scott Moss
Air Vehicles Division, Defence Science and Technology Organisation (DSTO), Melbourne, VIC, Australia

Sai L. Mullapudi
Department of Mechanical Engineering, University of Cincinnati, Cincinnati, OH, USA

Farah Mulyasari Sule
German--Indonesian Technical Cooperation, Environmental Geological Centre, Bandung, Indonesia
and
Institut Teknologi Bandung, Center for Disaster Mitigation, Bandung, Indonesia

Kai Münnich
Leichtweiss-Institute, Department of Waste and Resource Management, Technical University of Braunschweig, Braunschweig, Germany

Tim Muster
Commonwealth Scientific and Industrial Research Organisation (CSIRO) Materials Science and Engineering, Clayton, VIC, Australia

Rolf H. Neunaber
Industrieanlagen Betriebsgesellschaft mbH, Ottobrunn, Germany

Jonathan M. Nichols
US Naval Research Laboratory, Washington, DC, USA

Yi-Qing Ni
Department of Civil and Structural Engineering, Hong Kong Polytechnic University, Kowloon, Hong Kong, China

Francis Nkrumah
Department of Mechanical and Chemical Engineering, North Carolina A&T State University, Greensboro, NC, USA

Chang Kook Oh
Department of Civil Engineering, California Institute of Technology, Pasadena, CA, USA

Steven E. Olson
University of Dayton Research Institute, Dayton, OH, USA

Luis M. Ortega
GEOCISA, Madrid, Spain

Wies{\l}aw Ostachowicz
Institute of Fluid Flow Machinery, PAS, Gdansk, Poland
and
Faculty of Navigation, Gdynia Maritime University, Gdynia, Poland

Christophe Paget
Airbus, Filton, UK

Tso-Chien Pan
Nanyang Technological University, Singapore

Gyuhae Park
Engineering Institute, Los Alamos National Laboratory, Los Alamos, NM, USA

Triplicane A. Parthasarathy
Air Force Research Laboratory, Wright Patterson Air Force Base, Dayton, OH, USA
and
UES Incorporated, Air Force Research Laboratory, Wright Patterson Air Force Base, Dayton, OH, USA

Michael Pecht
Center for Advanced Life Cycle Engineering (CALCE), University of Maryland, College Park, MD, USA

Bart Peeters
LMS International, Leuven, Belgium

Udo Peil
Institute for Steel Structures, University of Technology Carolo-Wilhelmina at Braunschweig, Braunschweig, Germany

Zhike Peng
Department of Precision Instruments and Mechanology, Tsinghua University, Beijing, China

Kara Peters
Department of Mechanical and Aerospace Engineering, North Carolina State University, Raleigh, NC, USA

S. Gareth Pierce
Department of Electronic and Electrical Engineering, University of Strathclyde, Glasgow, UK

Darryll J. Pines
Department of Aerospace Engineering, University of Maryland, College Park, MD, USA

Kenneth Pipe
Humaware, Petersfield, UK

Christian Pöckl
AREVA NP GmbH, Erlangen, Germany

Ian Powlesland
Air Vehicles Division, Defence Science and Technology Organisation (DSTO), Melbourne, VIC, Australia

Don Price
Commonwealth Scientific and Industrial Research Organisation (CSIRO) Materials Science and Engineering, Lindfield, NSW, Australia

William H. Prosser
NASA Langley Research Center, Hampton, VA, USA

Xinlin P. Qing
Acellent Technologies, Inc., Sunnyvale, CA, USA

Ajay Raghavan
Department of Aerospace Engineering, University of Michigan, Ann Arbor, MI, USA

Nik Rajic
Defence Science and Technology Organisation (DSTO), Fisherman's Bend, VIC, Australia

Robert B. Randall
School of Mechanical and Manufacturing Engineering, University of New South Wales, Sydney, NSW, Australia

William F. Ranson
Direct Measurements, Inc., Atlanta, GA, USA

Steve Reed
QinetiQ, Farnborough, UK

Edwin Reynders
Department of Civil Engineering, Katholieke Universiteit Leuven, Leuven, Belgium

Piervincenzo Rizzo
Department of Civil and Environmental Engineering, University of Pittsburgh, Pittsburgh, PA, USA

Dennis Roach
Sandia National Laboratories, Albuquerque, NM, USA

Amy N. Robertson
IMTECH, Boulder, CO, USA

Michael J. Roemer
Impact Technologies, Rochester, NY, USA

Ajit Roy
Air Force Research Laboratory, Wright Patterson Air Force Base, Dayton, OH, USA

Gregory A. Ruderman
Air Force Research Laboratory, AFRL/RZSB, Edwards AFB, CA, USA

Aldo Ruotulo
Department of Geotechnical and Structural Engineering, Politecnico di Torino, Torino, Italy

Massimo Ruzzene
School of Aerospace Engineering, Georgia Institute of Technology, Atlanta, GA, USA

Werner Rücker
Division VII.2 Buildings and Structures, BAM Federal Institute for Materials Research and Testing, Berlin, Germany

Erdal Safak
Department of Earthquake Engineering, Kandilli Observatory and Earthquake Research Institute, Bogazici University, Istanbul, Turkey

John S. Sakellariou
Department of Mechanical and Aeronautical Engineering, University of Patras, Patras, Greece

Liming W. Salvino
Structures and Composites, Carderock Division, Naval Surface Warfare Center, West Bethesda, MD, USA

Pia Sartor
Department of Mechanical Engineering, University of Sheffield, Sheffield, UK

Shamachary Sathish
Air Force Research Laboratory, Wright Patterson Air Force Base, Dayton, OH, USA

Darrell Schlicker
JENTEK Sensors, Inc., Waltham, MA, USA

Bianka Schmidt-Brandecker
AeroStruc---Aeronautical Engineering, Buxtehude, Germany

Hans-Juergen Schmidt
AeroStruc---Aeronautical Engineering, Buxtehude, Germany

R. Kyle Schmidt
Messier-Dowty SA, Vélizy-Villacoublay, France

Frank Schubert
Fraunhofer Institute for Nondestructive Testing (IZFP-D), Dresden, Germany

Xaver Schuler
MPA Universität Stuttgart, Stuttgart, Germany

Mark Schulz
Department of Mechanical Engineering, University of Cincinnati, Cincinnati, OH, USA

Vesselin Shanov
Department of Chemical and Materials Engineering, University of Cincinnati, Cincinnati, OH, USA

Yanko Sheiretov
JENTEK Sensors, Inc., Waltham, MA, USA

Michael Shiao
Airport and Aircraft Safety Group, Aviation Research & Development Office, Federal Aviation Administration, Atlantic City International Airport, NJ, USA

Srinivasan M. Sivakumar
Department of Applied Mechanics, Indian Institute of Technology, Chennai, India

Ian F. C. Smith
Institute of Structural Engineering, Ecole Polytechnique Fédérale de Lausanne (EPFL), Lausanne, Switzerland

Henry A. Sodano
Department of Mechanical and Aerospace Engineering, Arizona State University, Tempe, AZ, USA

Hoon Sohn
Department of Civil and Environmental Engineering, Korea Advanced Institute of Science and Technology, Daejeon, Republic of Korea

Elisa Sorrivi
DISTART, University of Bologna, Bologna, Italy

Constantinos Soutis
Aerospace Engineering, University of Sheffield, Sheffield, UK

Holger Speckmann
Airbus, Bremen, Germany

Wieslaw J. Staszewski
Department of Mechanical Engineering, University of Sheffield, Sheffield, UK

George F. Studor
NASA Johnson Space Center, Houston, TX, USA

Shankar Sundararaman
Ray W. Herrick Laboratories, Purdue University, West Lafayette, IN, USA

Mannur Sundaresan
Department of Mechanical and Chemical Engineering, North Carolina A&T State University, Greensboro, NC, USA

Mohammad R. Sunny
Aerospace and Ocean Engineering, Virginia Polytechnic Institute and State University, Blacksburg, VA, USA

Cecilia Surace
Department of Geotechnical and Structural Engineering, Politecnico di Torino, Torino, Italy

Michael A. Sutton
Department of Mechanical Engineering, University of South Carolina, Columbia, SC, USA

Zhongqing Su
Department of Mechanical Engineering, Hong Kong Polytechnic University, Kowloon, Hong Kong, China

Lionel Tarassenko
Department of Engineering Science, University of Oxford, Oxford, UK

Barbara Teilen-Willige
Department of Hydrogeology and Bureau of Applied Geoscientific Remote Sensing (BAGF), Technical University of Berlin, Stockach, Germany

Jens Telgkamp
Structure Design Principles, Airbus, Hamburg, Germany

Michael D. Todd
Department of Structural Engineering, University of California, San Diego, CA, USA

Peter Trathen
Air Vehicles Division, Defence Science and Technology Organisation (DSTO), Melbourne, VIC, Australia

Tony Trueman
Air Vehicles Division, Defence Science and Technology Organisation (DSTO), Melbourne, VIC, Australia

Reginald I. Vachon
Direct Measurements, Inc., Atlanta, GA, USA

Stephen Van der Velden
Air Vehicles Division, Defence Science and Technology Organisation (DSTO), Melbourne, VIC, Australia

Robert Veit-Egerer
VCE--Vienna Consulting Engineers, Vienna, Austria

Erasmo Viola
DISTART, University of Bologna, Bologna, Italy

Robert L. Walter IV
Applied Research Laboratory, Pennsylvania State University, University Park, PA, USA

Ming L. Wang
Department of Civil and Materials Engineering, University of Illinois, Chicago, IL, USA

Xiaoming Wang
CSIRO Sustainable Ecosystems, Commonwealth Scientific and Industrial Research Organisation, Melbourne, VIC, Australia

Andrew Washabaugh
JENTEK Sensors, Inc., Waltham, MA, USA

Helmut Wenzel
VCE Holding GmbH, Vienna, Austria

Martine Wevers
Department of Metallurgy and Materials Engineering, Katholieke Universiteit Leuven, Leuven, Belgium

Paul White
Institute of Sound and Vibration Research, University of Southampton, Southampton, UK

Paul D. Wilcox
Department of Mechanical Engineering, University of Bristol, Bristol, UK

Alan Wilson
Air Vehicles Division, Defence Science and Technology Organisation (DSTO), Melbourne, VIC, Australia

Mark Windoloski
JENTEK Sensors, Inc., Waltham, MA, USA

Kai-Yuen Wong
Highways Department, Government of Hong Kong, China

Keith Worden
Department of Mechanical Engineering, University of Sheffield, Sheffield, UK

Zhanjun Wu
Department of Aeronautics and Astronautics, Stanford University, Stanford, CA, USA

Lin Ye
School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney, Sydney, NSW, Australia

Shengfa Yuan
Department of Precision Instruments and Mechanology, Tsinghua University, Beijing, China

YeoHeung Yun
Department of Mechanical Engineering, University of Cincinnati, Cincinnati, OH, USA

Lingyu Yu
University of South Carolina, Columbia, SC, USA

Andrei N. Zagrai
New Mexico Institute of Mining and Technology, Socorro, NM, USA

Yunfeng Zhang
Department of Civil and Environmental Engineering, University of Maryland, College Park, MD, USA

Vladimir Zilberstein
JENTEK Sensors, Inc., Waltham, MA, USA

SEARCH