28th International Conference on Advanced Ceramics and Composites B: Ceramic Engineering and Science Proceedings, Volume 25, Issue 4

Copyright © 2004 The American Ceramics Society

28th International Conference on Advanced Ceramics and Composites B: Ceramic Engineering and Science Proceedings, Volume 25, Issue 4

Editor(s): Edgar Lara-Curzio, Michael J. Readey

Published Online: 26 MAR 2008

Print ISBN: 9780470051528

Online ISBN: 9780470291191

DOI: 10.1002/9780470291191

About this Book

Product Information

About The Product

A collection of Papers Presented at the 28th International Conference and Exposition on Advanced Ceramics and Composites held in conjunction with the 8th International Symposium on Ceramics in Energy Storage and Power Conversion Systems.

Table of contents

    1. You have free access to this content
      Frontmatter (pages i–xvi)

  2. Part I: Mechanical Properties of Engineering Ceramics, Composites and Aerospace Materials

    1. Chapter 1

      Properties of Rare Earth Oxynitride Glasses and the Implications for High Temperature Behaviour of Silicon Nitride Ceramics (pages 2–8)

      Stuart Hampshire and Michael J. Pomeroy

    2. Chapter 2

      Mechanical Properties of Porous Silicon Nitride from Fine/Coarse Powder Mixture (pages 9–12)

      Masato Ishizaki, Motohide Ando, Naoki Kondo and Tatsuki Ohji

    3. Chapter 3

      Production and Characterization of Ultra Refractory HfB2-SiC Composites (pages 13–18)

      Frederic Monteverde and Alida Bellosi

    4. Chapter 4

      Sintering Behavior of Dense Nanocrystalline Zirconia Ceramics: A Comparative Investigation (pages 19–24)

      M. Wolff, G. Falk and R. Clasen

    5. Chapter 5

      Direct Evaluation of Local Thermal Conduction in Silicon Nitrides with Enhanced Grain Growth (pages 25–30)

      Akira Okada, Toshio Hori, Takeo Okamura, Yasuyuki Niino and Jiping Ye

    6. Chapter 6

      Mechanical Properties of Pressureless Sintered SiC-AIN Composites Obtained without Sintering Bed (pages 31–36)

      G. Magnani and L. Beaulardi

    7. Chapter 7

      The Influence of Beta-Eucryptite Glassceramics on the Structure and Main Properties of Alumina Ceramics (pages 37–42)

      James A. Geodakyan, Aram K. Kostanyan, Karen J. Geodakyan, Svetlana T. Sagatelyan and Berta V. Petrosyan

    8. Chapter 8

      Mechanical Behavior of SiC-Polycrystalline Fiber-Bonded-Cermics (pages 43–48)

      S. Kajii, K. Matsunaga, M. Sato and T. Ishikawa

    9. Chapter 9

      Design, Manufacture and Quality Assurance of C/C-SiC Composites for Space Transportation Systems (pages 49–58)

      W. Krenkel, J. M. Hausherr, T. Reimer and M. Frieß

    10. Chapter 10

      Effect of Fabrication Process on Internal Friction of SiC/SiC Composites (pages 59–64)

      Hisashi Serizawa, Hiroshi Araki, Tetusji Noda, Shinji Sato and Akira Kohyama

    11. Chapter 11

      Effect of Interphase on Transthickness Tensile Strength of High-Purity Silicon Carbide Composites (pages 65–70)

      T. Hinoki, Y. Maki, A. Kohyama, E. Lara-Curzio and L. L. Snead

    12. Chapter 12

      Through-Thickness Properties of 2D Woven SiC/SiC Panels with Various Microstructures (pages 71–78)

      H. M. Yun and J. A. Dicarlo

    13. Chapter 13

      An Assessment of Variability in the Average Tensile Properties of a Melt-Infiltrated SiC/SiC Composite (pages 79–86)

      Sreeramesh Kalluri, Anthony M. Calomino and David N. Brewer

    14. Chapter 14

      Net Shape Manufacturing of Fabric Reinford Oxide/Oxide Components Via Resin Transfer Moulding and Pyrolysis (pages 87–92)

      Bernhard Heidenreich, Walter Krenkel, Martin Frieß and Heiner Gedon

    15. Chapter 15

      In-Situ Reaction Depposition Coating of LaPO4 on Al2O3 Fabric Cloth for Al2O3/Al2O3 Composites (pages 93–98)

      Toyohiko Yano, Pengyuan Lee and Masamitsu Imai

    16. Chapter 16

      Effect of Alkali Choice on Geopolymer Properties (pages 99–104)

      Waltrud M. Kriven and Jonathan L. Bell

    17. Chapter 17

      Thermal Shock Resistance of Nextel ™610 and Nextel ™720 Continuous Fiber-Reinforced Mullite Matrix Composites (pages 105–110)

      Reinhard A. Simon and Peter Supancic

    18. Chapter 18

      Tensile Properties of Nextel ™720-Based Tows and Minicomposites Subjected to High-Temperature Soaking (pages 111–116)

      D. M. Pai, S. Yarmolenko, B. Kailasshankar, C. Murphy, J. Sankar and L. P. Zawada

    19. Chapter 19

      Effect of Monazite Coating on Tensile Behavior of Nextel™ 720 Fibers at High Temperatures (pages 117–122)

      D. M. Pai, S. Yarmolenko, E. Freeman, J. Sankar and L. P. Zawada

    20. Chapter 20

      BN Interphase Processed by LP-CVD from Tris(Dimethylamino)Borane and Characterized using SiC/SiC Minicomposites (pages 123–128)

      S. Jacques, B. Bonnetot, M.-P. Berthet and H. Vincent

    21. Chapter 21

      Oxidation Effects on Mechanical and Electrical Properties of Electroconductive Ceramic Composites (pages 129–135)

      Alida Bellosi, Valentina Medri and Diletta Sciti

    22. Chapter 22

      Oxidation Kinetics and Strength Degradation of Carbon Fibers in a Cracked Ceramic Matrix Composite (pages 137–146)

      Michael C. Halbig

    23. Chapter 23

      Mechanical Behavior and Oxidation-Resistance of an Orthogonal 3D β-SIC Fiber/Carbon Matrix Composite (pages 147–152)

      Takuya Aoki, Toshio Ogasawara and Takashi Ishikawa

    24. Chapter 24

      Mechanical Properties of Ceramic Matrix Composites Exposed to Rig Tests (pages 153–159)

      G. Y. Richardson, C. S. Lei and Raj N. Singh

    25. Chapter 25

      Composition and Microstructural Design for Improved Wear Properties in Sialon Ceramics (pages 161–166)

      Mark I Jones, Kiyoshi Hirao, Yukihiko Yamauchi and Hideki Hyuga

    26. Chapter 26

      Plasma-Treated Silicon Nitrides Exhibiting Ultra-Low Friction (pages 167–172)

      Akira Okada, Toshio Hori, Kenichi Ueoka and Jiping Ye

    27. Chapter 27

      Tribological Properties of Si3N4/Si3N4-BN Alternate Layered Composites (pages 173–178)

      Takashi Hirao, Kiyoshi Hirao and Yukihiko Yamauchi

    28. Chapter 28

      A Motorcycle Brake System with C/C-SiC Composite Brake Discs (pages 179–184)

      Zmago Stadler, Tomaž Kosmač, Mihael Kermc and Aleš Dakskobler

    29. Chapter 29

      The Tribological Property Effects of Graphite within a Composite Pad-Cast Iron Braking System (pages 185–190)

      Séverine Ramousse

    30. Chapter 30

      High Performance C/C-SIC Brake Pads (pages 191–196)

      Walter Krenkel, Hussam Abu El-Hija and Michael Kriescher

    31. Chapter 31

      Sliding Contact Damage of Y-α/β COmposite SiAlON Ceramics (pages 197–202)

      Wataru Kanematsu, Mark I. Jones and Kiyoshi Hirao

    32. Chapter 32

      Processing and Wear Behavior of Cr-Al2O3-ZrO2 and Mo-Al2O3-ZrO2 Composites. (pages 203–209)

      R. Janssen, S. Scheppokat, G. De Portue, R. Hannink and N. Claussen

    33. Chapter 33

      Improving Performance of Polycrystalline Diamond Components in Three-Cone Roller Bits using Fibrous Monolith Technology (pages 211–218)

      Anthony Griffo and Dan Belnap

    34. Chapter 34

      Enhancement of the Fracture Resistance of SiC Fiber (NICALON™) /SiC Refractory Composites (pages 219–224)

      Tomohiro Tanaka, Shigeru Fukumaru, Hiroshi Ichikawa and Hiroshi Abe

    35. Chapter 35

      Critical Frontal Process Zone Evaluation of Aluminum Titanate/Alumina Based Ceramics by SEVNB Technique (pages 225–230)

      Chun-Hong Chen and Hideo Awaji

    36. Chapter 36

      Atomistic Study of Crack Propagation Near the Cu(111)/Al2O3(0001) Interface (pages 231–236)

      Sergey V. Dmitriev, Nobuhiro Yoshikawa, Makoto Hasegawa, Yutaka Kagawa, Masanori Kohyama and Shingo Tanaka

    37. Chapter 37

      Sensitivity of Silicon Carbide and Other Ceramics to Edge Fracture: Method and Results (pages 237–246)

      George Gogotsi, Sergey Mudrik and Andreas Rendtel

    38. Chapter 38

      Determination of Elastic Properties of a Ceramic-Based Joint Using a Digital Image Correlation Method (pages 247–253)

      Matthieu Puyo-Pain and Jacques Lamon

    39. Chapter 39

      Evaluation of Four Different Experimental Techniques for Determination of Elastic Properties of Solids (pages 255–260)

      Miladin Radovic, Edgar Lara-Curzio and Laura Riester

    40. Chapter 40

      Strength Testing System for Ceramic Grains (pages 261–266)

      Kristin Breder, Edgar Lara-Curzio and Laura Riester

    41. Chapter 41

      Characterization of C/Enhanced SiC Composite During Creep-Rupture Tests Using an Ultrasonic Guided Wave Scan System (pages 267–274)

      Don J. Roth, Michael J. Verrilli, Richard E. Martin and Laura M. Cosgriff

    42. Chapter 42

      Design of a High Temperature Test Device for Bidirectional Loading for CMC Samples (pages 275–281)

      I. Fischer, T. Reimer and H. Weihs

    43. Chapter 43

      Biaxial Strength Test of Discs of Different Size Using the Ball on Three Balls Test (pages 283–288)

      Andreas Börger, Robert Danzer and Peter Supancic

    44. Chapter 44

      Atomic Force Microscopy Study of the Surface Degradation Mechanisms of Zirconia Based Ceramics (pages 289–294)

      Sylvain Deville, Jérôme Chevalier, Gilbert Fantozzi, Ramón Torrecillas, José F. Bartolomé and José S. Moya

    45. Chapter 45

      Internal Pressure Testing of Structural Ceramic Tubes (pages 295–300)

      R. H. Carter and J. J. Swab

    46. Chapter 46

      Characterization of Si3N4 Bars Extracted from Various Regions of a Billet by Resonance and Flex Testing (pages 301–306)

      G. Ojard, T. Barnett, M. Ferber and K. Johnson

    47. Chapter 47

      Laser Scattering characterization of Subsurface Defect/Damage in Silicon-Nitride Ceramic Valves (pages 307–312)

      J. G. Sun, J. M. Zhang and M. J. Andrews

    48. Chapter 48

      A Model for the Bulk Mechanical Response of Porous Ceramics Exhibiting a Ferroelectric-to-Antiferroelectric Phase Transition During Hydrostatic Compression (pages 313–318)

      Stephen T. Montgomery and David H. Zeuch

    49. Chapter 49

      Random Local Load Sharing in Multifilament Bundles: Modelling and Influence on Ceramic Matrix Composite Failure (pages 319–325)

      V. Calard and J. Lamon

    50. Chapter 50

      Experimental and Numerical Fluid-Structure Investigations of a Generic Bodyflap Region Model (pages 327–332)

      Roger Schaefer, Burkard Esser, Ali Guelhan and Andreas Mack

  3. Part II: Advanced Ceramic Coatings for Structural, Environmental and Functional Applications

    1. Chapter 51

      Advanced Ceramic Coatings for Structural, Environmental and Functional Applications (pages 333–338)

    2. Chapter 52

      Erosion of Bare and Coated Polymer Matrix Composites by Solid Particle Impingement (pages 339–344)

      Kazuhisa Miyoshi, James K. Sutter, Richard A. Horan, Subhash K. Naik and Randall J. Cupp

    3. Chapter 53

      The Effect of Thermal Mismatch on Stresses, Morphology and Failures in Thermal Barrier Coatings (pages 345–350)

      J. Shi, S. Darzens and A. M. Karlsson

    4. Chapter 54

      Mechanically Induced Delamination Cracking in Thermal Barrier Composites (pages 351–356)

      Takashi Wakui, Jürgen Malzbender, Egbert Wessel, Rolf W. Steinbrech and Lorenz Singheiser

    5. Chapter 55

      Investigation of Thermal Fatigue Life of Thermal Barrier Coating (pages 357–362)

      Y. Ohtake and T. Natsumura

    6. Chapter 56

      Evaluation of Two New Thermal Barrier Coating Materials Produced by APS and EB-PVD (pages 363–373)

      B. Saruhan, U. Schulz, P. Bengtsson, R. Knoedler, P. Moretto, F. Taricco, R. Vassen, G. Pracht, C. Friedrich, O. Lavigne, C. Siry, N. Coignard and R. Wing

    7. Chapter 57

      Low Thermal Conductivity Ceramics for Turbine Blade Thermal Barrier Coating Application (pages 375–380)

      Uwe Schulz, P. Moretto, B. Saint-Ramond, A. Vanlieshout, O. Lavigne and A. Börger

    8. Chapter 58

      Solution Precursor Plasma Spray: A PROmising New Technique for Forming Functional Nanostructured Films and Coatings (pages 381–387)

      Xinqing Ma, Jeff Roth, T. D. Xiao, L. D. Xie, M. Gell, E. H. Jordan and N. P. Padture

    9. Chapter 59

      Further Improvement of the Properties of Sprayed TBC Using Hollow PSZ Spheres (pages 389–398)

      Ghislaine Bertrand, Priscille Roy, Rémy Mévrel, Cathy Meunier and Didier Demange

    10. Chapter 60

      Effects of Bond Coat Surface Roughness and Pre-Oxidation on the Thermal Cycling Lifetime of Thermal Barrier Coatings (pages 399–404)

      J. Liu and Y. H. Sohn

    11. Chapter 61

      Chemical Etching of Silicon Carbide Ceramic Surface in Chlorine-Containing Gas Mixtures (pages 405–410)

      A. V. Zinovev, J. F. Moore, J. Hryn, O. Auciello, J. Carlisle and M. J. Pellin

    12. Chapter 62

      Micromechanisms Affecting Macroscopic Deformation of Plasmasprayed TBCs (pages 411–416)

      E. Trunova, R. Herzog, T. Wakui, R. W. Steinbrech, E. Wessel and L. Singheiser

    13. Chapter 63

      Stability of Silicon Nitride Coated with Lutetium Disilicate in an Oxidative Environment (pages 417–422)

      Tomohiro Suetsuna, Motohide Ando, Masato Ishizaki, Tatsuki Ohji and Masahiro Asayama

    14. Chapter 64

      Effect of Scattering on the Combined Reflection and Thermal Radiation Emission of a Typical Semitransparent TBC Material (pages 423–428)

      Charles M. Spuckler

    15. Chapter 65

      Behavior of Sputter-Deposited Alumina Thin Films Under Subcritical Hydrothermal Conditions (pages 429–434)

      Sang Tae Park and Ronald H. Baney

    16. Chapter 66

      Stability and Performance of High Emissivity Coatings for Radiation Coupled Thermionic Converters (pages 435–440)

      Paul N. Clark, Bryan H. C. Chen, William H. Robertson and Holger H. Streckert

    17. Chapter 67

      Functionally Graded CVD Mullite Environmental Barrier Coatings (pages 441–450)

      S. N. Basu and V. K. Sarin

    18. Chapter 68

      Corrosion Mechanism of Lu2Si2O7 Phase in Static State Water Vapor Environment (pages 451–455)

      Shunkichi Ueno, D. Doni Jayaseelan, Naoki Kondo, Tatsuki Ohji and Shuzo Kanzaki

    19. Chapter 69

      Examination of Fracture Process and Environmental Resistance of Ceramic Matrix Composites (SiC/SiC) (pages 457–462)

      Mitsutoshi Okada, Isao Yuri, Tohru Hisamatsu, Akito Nitta, Tsuneji Kameda and Yoshiyuki Yasutomi

    20. Chapter 70

      Corrosion of Ceramic Materials in Hot Gas Environment (pages 463–468)

      Hagen Klemm, Marco Fritsch and Bjoern Schenk

    21. Chapter 71

      Optimizing Cu-Cr Coatings for Environmental Protection of Copper Alloys (pages 469–477)

      Linus U. Ogbuji

    22. Chapter 72

      Characterization of Y2O3-Doped La2Zr2O7 Based EB-PVD Thermal Barrier Coatings Using X-Ray Microtomography (CMT) and Small Angle Neutron Scattering (SANS) (pages 479–484)

      B. Saruhan, A. Flores Renteria, F. Decarlo, A. Kulkarni and J. Ilavsky

    23. Chapter 73

      Growth of Thermally Grown Oxide on (Ni, Pt)Al Bondcoat During Short Term Oxidation (pages 485–490)

      S. Laxman, Y. H. Sohn and K. S. Murphy

    24. Chapter 74

      Measuring and Modeling Residual Stresses in Air Plasma Spray Thermal Barrier Coatings (pages 491–496)

      Xiaoqun Chen, Jalees Ahmad and Jeff Price

    25. Chapter 75

      Formation of Environmental Barrier Coating on SI3N4 by Gas-Pressure Sintering (pages 497–500)

      D. Doni Jayaseelan, S. Ueno, N. Kondo, T. Ohji and S. Kanzaki

  4. Part III: Biomaterials and Biomedical Applications

    1. Chapter 76

      Wear of a Bioceramic Dental Restorative Material by Tooth Brushing (pages 502–508)

      Anna Pallas, Hårkan Engqvist, L-Å Lindén and Leif Hermansson

    2. Chapter 77

      Depth-Profiling of Composition and Texture in Human Tooth Enamel–A Functionally Graded Material (pages 509–514)

      I. M. Low

    3. Chapter 78

      Morphologies of Precipitate in the Carbonate Plus Phosphate Aqueous Solution (pages 515–521)

      Wen-Yi Huang and Tzer-Shin Sheu

    4. Chapter 79

      Calcium Phosphate Ceramics as Substrate for Cartilage Cultivation (pages 523–528)

      Rolf Janssen, Stephanie Nagel-Heyer, Christiane Goepfert, Ralf Pörtner, Derya Toykan, Oliver Krummhauer, Michael Morlock, Peter Adamietz, Norbert M. Meenen, Waltraud M. Kriven, Dong-Kyu Kim, Anna Tampieri and Giancarlo Celotti

    5. Chapter 80

      Resorbable Polymer-Ceramic Composites for Orthopedic Scaffold Applications (pages 529–536)

      R. Vaidyanathan, B. Hecht, A. Studley, T. Phillips, P. D. Calvert, B. Tellis, A. Coleman and J. Szivek

    6. Chapter 81

      Nanoceramics as Drug Delivery Carriers (pages 537–542)

      Waltraud M. Kriven, Seo-Young Kwak, Matthew A. Wallig, Tomas Martin-Jimenez, Robert B. Clarkson, Barbara E. Kitchell and Jin-Ho Choy

    7. Chapter 82

      Chemical Processing of Brushite: Its Conversion to Apatite or Ca2P2O7 (pages 543–548)

      A. Cuneyt Tas and Sarit B. Bhaduri

    8. Chapter 83

      Chemical Interactions between Ca-Aluminate Implants and Bone (pages 549–554)

      H. Engqvist, M. Couillard, G. A. Botton, N. Axén, N. O. Ahnfelt and L. Hermansson

    9. Chapter 84

      Fabrication of Novel Hydroxyapatite/Titanium Composite Coating Using rf Reactive Plasma Spraying (pages 555–564)

      Y. Yokogawa, M. Inagaki and T. Kameyama

    10. Chapter 85

      Manufacturing of Ceramic Dental Components by Means of Electro-Phoretic Deposition (pages 565–570)

      Christian Oetzel, Jan Tabellion and Rolf Clasen

    11. Chapter 86

      New and Conventional Simulated Body Fluids (pages 571–576)

      Hiroaki Takadama, Masami Tanahashi Hashimoto, Yorinobu Takigawa, Mineo Mizuno and Tadashi Kokubo

    12. Chapter 87

      Scratch Testing of a Dental Restorative Material Based on Calcium Aluminate (pages 577–582)

      Anna Pallas, Håkan Engqvist, S. Jacobsson and Leif Hermansson

  5. Part IV: Nanomaterials and Biomimetics

    1. Chapter 88

      Near-Shape Manufacturing of Complex Silica Glasses by Electrophoretic Deposition of Mixtures of Nanosized and Coarser Particles (pages 584–590)

      Jan Tabellion and Rolf Clasen

    2. Chapter 89

      Alumina Ceramics by Means of Electrophoretic Deposition of Submicron Powders (pages 591–596)

      Adelina Braun, Matthias Wolff, Christian Oetzel, Jan Tabellion, Guido Falk and Rolf Clasen

    3. Chapter 90

      Influence of the Synthesis Temperature on the Crystallization Path and Kinetics of YAG Powder (pages 597–602)

      Paola Palmero, Laura Montanaro, Claude Esnouf and Gilbert Fantozzi

    4. Chapter 91

      High Strength SISiC Ceramics Derived from Wood Powders (pages 603–608)

      Andreas Hofenauer, Olaf Treusch, Fritz Tröger, Michaela Gahr, Jens Schmidt, Gerd Wegener, Walter Krenkel and JÖRg Fromm

    5. Chapter 92

      Development of Screen Printable Sensors with Templated Mesoporous Silica (pages 609–614)

      Karin Lindqvist, Mari Arenö and Elis Carlström

    6. Chapter 93

      Synthesis and Characterization of Sol-Gel Derived Nanostructured Composite of ZnO/PVP Thin Film as Biosensor (pages 615–620)

      Tianbao Du, Hongwei Song and Olusegun J. Ilegbusi

    7. Chapter 94

      Microwave Plasma Chemical Vapor Deposition (CVD) of Carbon Based Films in the System C-N (pages 621–626)

      R. Ramamurti, R. S. Kukreja, L. Guo, V. Shanov and R. N. Singh

    8. Chapter 95

      Manufacturing of Thick Layers Made from Nanosized SiO2 Powders by dip-Coating (pages 627–632)

      Georg Fehringer and Rolf Clasen

    9. Chapter 96

      Mechanical Properties of Ni Embedded Alumina Nanocomposite Thin Films (pages 633–638)

      S. Neralla, D. Kumar, S. Yarmolenko and J. Sankar

    10. Chapter 97

      Synthesis and Crystal Phase Evaluation of Hydroxylapatite Using the Rietveld-Maximum Entropy Method (pages 639–645)

      AndrÉ Vitor Chaves de Andrade, José Caetano Zurita da Silva, Carlos Oliveira Paiva-Santos, Cleverson Weber, Vegner Hizau dos Santos Utuni, Sérgio Mazurek Tebcherani, Christiane Phihppini Ferreira Borges, Elias da Costa, Salvador Martinez Manent and Av. Gal Carlos Cavalcanti

    11. Chapter 98

      Processing and Hardness of a AL2O3 - MgAl2O4 Nanocomposite (pages 647–653)

      B. W. McEnemey, G. Quinn, V. A. Greenhut, R. K. Sadangi, V. Shukla, B. Kear and D. E. Niesz

    1. You have free access to this content
      Author Index (pages 654–656)

SEARCH