Advances in Solid Oxide Fuel Cells: Ceramic Engineering and Science Proceedings, Volume 26, Number 4

Copyright © 2005 The American Ceramic Society

Advances in Solid Oxide Fuel Cells: Ceramic Engineering and Science Proceedings, Volume 26, Number 4

Editor(s): Narottam P. Bansal

Published Online: 26 MAR 2008

Print ISBN: 9781574982343

Online ISBN: 9780470291245

DOI: 10.1002/9780470291245

About this Book

Product Information

About The Product

Due to its many potential benefits, including high electrical efficiency and low environmental emissions, solid oxide fuel cell (SOFC) technology is the subject of extensive research and development efforts by national laboratories, universities, and private industries. This collection of papers provides valuable insights on materials-related aspects of fuel cells such as SOFC component materials, materials processing, and cell/stack design, performance, and stability. Emerging trends in electrochemical materials, electrodics, interface engineering, long-term chemical interactions are also covered.

Table of contents

    1. You have free access to this content
      Frontmatter (pages i–ix)

  2. Part 1: Overview and Current Status

    1. Chapter 1

      Worldwide SOFC Technology Overview and Benchmark (pages 3–14)

      Ludger Blum, Wilhelm A. Meulenberg and Heinz Nabielek

    2. Chapter 2

      U.S. Doe Solid Oxide Fuel Cells: Technical Advances (pages 15–22)

      Mark C. Williams, Joseph P. Strakey and Wayne A. Surdoval

  3. Part 2: Processing/Fabrication

    1. Chapter 3

      Single-Step Co-Firing Technique for SOFC Fabrication (pages 25–32)

      Guosheng Ye, Feng Ju, Chuangang Lin, Srikanth Gopalan, Uday Pal and Donald Seccombe

    2. Chapter 4

      Fabrication and Properties of an Anode-Supported Tubular IT-SOFC Based on Lanthanum Gallate (pages 33–40)

      Nigel Sammes and Yanhai Du

    3. Chapter 5

      Low Cost SOFC Manufacturing Process (pages 41–47)

      Iouri Balachov, P. Jayaweera, M. Hornbostel, A. Sanjurjo, A. S. Lipilin, B. L. Kyzin, D. I. Bronin, Yu. G. Yatluk and V. V. Sevastianov

    4. Chapter 6

      Y2O3-Stabilized ZrO2 Aerogels Prepared from an Epoxide Assisted Solgel Synthesis for Use in SOFC Composite Cathodes (pages 49–56)

      Christopher N. Chervin, Hsiang Wei Chiu, Susan M. Kauzlarich, Brady J. Clapsaddle, Robert S. Glass and Joe H. Satcher

    5. Chapter 7

      Pulsed Laser Deposition of Bace0.85Y0.15O3 Films (pages 57–63)

      F. W. Dyny and A. Sayir

  4. Part 3: Characterization/Testing

    1. Chapter 8

      Electrochemical Characterization of Vacuum Plasma Sprayed Planar Solid Oxide Fuel Cells and Short Stacks for Mobile Application (pages 67–74)

      M. Lang, A. Dresel, T. Franco, Z. Uhan, A. Nestle, G. Schiller and P. Szabo

    2. Chapter 9

      Single Cell Testing and Performance Analysis of Planar Solid Oxide Fuel Cells (pages 75–82)

      Mirko Antloga, Richard Goettler, Kurt Kneidel and Liang Xue

    3. Chapter 10

      Long-Term SOFC Stability with Coated Ferritic Stainless Steel Interconnect (pages 83–87)

      S. P. Simner, M. D. Anderson, G-G Xia, Z. Yang and J. W. Stevenson

    4. Chapter 11

      Chemical Diffusion and Hydrogen Separation Properties of Lanthenum Ferrite and Doped Ceria Composite Mixed Conductors (pages 91–98)

      Annamalai Karthikeyan, Hengdong Cui, Srikanth Gopalan and Uday B. Pal

    5. Chapter 12

      Vapor Phase Silica Transport During SOFC Operation at 1000°C (pages 99–110)

      Prabhakar Singh and Shailesh D. Vora

    6. Chapter 13

      The Effect of Inverter Ripple on Solid Oxide Fuel Cell Performance (pages 111–117)

      Christopher Johnson and Randall Gemmen

  5. Part 4: Electrodes

    1. Chapter 14

      Study of Praseodyium Strontium Manganite for the Potential Use as a Solid Oxide Fuel Cell Cathode (pages 121–128)

      Matthew E. Pfluge, Max C. Deibert, Greg W. Coffey and Larry R. Pederson

    2. Chapter 15

      Chromium Poisoning Effects on Various Cathodes (pages 129–138)

      Jin Yong Kim, Nathan L. Canfield, Larry A. Chick, Kerry D. Meinhardt and Vince L. Sprenkle

    3. Chapter 16

      Anomolus Shrinkage of Lanthanum Strontium Manganite (pages 139–149)

      Benjamin McCarthy, Harlan Anderson, Xaio-Dong Zhou, Larry Pederson, Gregory Coffey and Prabhakar Singh

    4. Chapter 17

      Development and Characterization of SOFC NI-YSZ Anodes Using Highly Porous NI Foam (pages 151–158)

      S. F. Corbin, R. M. Clemmer and Q. Yang

    5. Chapter 18

      High Purity H2/H2O/Nickel/Stabilized Zirconia Electrodes at 500°C (pages 159–168)

      J. Høgh, T. Jacobsen, K. Vels Hansen, K. Norrman, I. Chorkendorff and M. Mogensen

    6. Chapter 19

      Characterization of Pore Structure of Electrodes of Solid Oxide Fuel Cells (pages 169–176)

      Akshaya Jena and Krishna Gupta

    7. Chapter 20

      Influence of Processing Parameters on Porosity of NiO-YSZ Solid Oxide Fuel Cell Anode Material (pages 177–183)

      G. Rajaram, Z. Xu, X. Jiang, D. M. Pai, J. Filatovs and J. Sankar

    8. Chapter 21

      Property Control of Cathodes and Anodes Produced by Slip Casting for Planar Solid Oxide Fuel Cells (pages 185–190)

      Zhigang Xu, Gukan Rajaram, Devdas Pai and Jag Sankar

  6. Part 5: Interconnects

    1. Chapter 22

      Surface Modification of Ferritic and NI Based Alloys for Improved Oxidation Resistance in Sofc Applications (pages 193–200)

      Paul D. Jablonski, David E. Alman and Steven C. Kung

    2. Chapter 23

      Ferritic Stainless Steel SOFC Interconnects with Thermally Grown (Mn, Co)3O4 Spinel Protection Layers (pages 201–208)

      Zhenguo Yang, Guanguang Xia, Steve P. Simner and Jeffry W. Stevenson

    3. Chapter 24

      Chemical Reaction Behavior Between Glass-Ceramic Sealants and High Chromium Ferritic Steels Under Various SOFC Conditions (pages 209–216)

      S. M. Gross, T. Koppitz and N. H. Menzler

    4. Chapter 25

      Electrical Contacts Between Cathodes and Metallic Interconnects in Solid Oxide Fuel Cells (pages 217–224)

      Zhenguo Yang, Guanguang Xia and Jeffry W. Stevenson

  7. Part 6: Seals

    1. Chapter 26

      Finite Element Analysis of the Bonded Compliant Seal Design—A New Sealing Concept for Use in Planar Solid Oxide Fuel Cells (pages 227–237)

      B. J. Koeppel and K. S. Weil

    2. Chapter 27

      Glass-Ceramic Materials of the System BaO-CaO-SiO2 as Sealants for SOFC Applications (pages 239–245)

      S.-M. Gross, T. Koppitz, J. Remmel and U. Reisgen

    3. Chapter 28

      Layered Composite Seals for Solid Oxide Fuel Cells (SOFC) (pages 247–255)

      Raj N. Singh and S. S. Parihar

    4. Chapter 29

      Glass MICA Composite Seals for Solid Oxide Fuel Cells (pages 257–264)

      Yeong-Shyung Chou, Jeffry W. Stevenson and Prabhakar Singh

    5. Chapter 30

      Combined Ageing and Thermal Cycling of Compressive MICA Seals for Solid Oxide Fuel Cells (pages 265–272)

      Yeong-Shyung Chou, Jeffry W. Stevenson and Prabhakar Singh

  8. Part 7: Mechanical Properties

    1. Chapter 31

      Mechanical Properties of SOFC Seal Glass Composites (pages 275–283)

      Sung R. Choi and Narottam P. Bansal

    2. Chapter 32

      Fracture Energies of Brittle Sealants for Planar Solid Oxide Fuel Cells (pages 285–291)

      Jürgen Malzbender, Rolf W. Steinbrech, Lorenz Singheiser and Peter Batfalsky

    3. Chapter 33

      Failure Probability of Solid Oxide Fuel Cells (pages 293–298)

      JÜRgen Malzbender, Rolf W. Steinbrech and Lorenz Singheiser

    4. Chapter 34

      Creep Deformation of NI/YSZ Cermet in SOFCS (pages 299–306)

      Wenning Liu and Jianmin Qu

    5. Chapter 35

      A Numerical Simulation Tool for Fracture Analysis in Solid Oxide Fuel Cells (pages 307–314)

      Janine Johnson and Jianmin Qu

  9. Part 8: Fuel Reforming

    1. Chapter 36

      Activity and Structure of Perovskites as Diesel Reforming Catalysts for Solid Oxide Fuel Cell (pages 317–324)

      Di-Jia Liu and Michael Krumpelt

    1. You have free access to this content
      Author Index (pages 325–326)

SEARCH