24th Annual Conference on Composites, Advanced Ceramics, Materials, and Structures: B: Ceramic Engineering and Science Proceedings, Volume 21, Issue 4

Copyright © 2000 The American Ceramic Society

24th Annual Conference on Composites, Advanced Ceramics, Materials, and Structures: B: Ceramic Engineering and Science Proceedings, Volume 21, Issue 4

Editor(s): Todd Jessen, Ersan Ustundag

Published Online: 28 MAR 2008

Print ISBN: 9780470375693

Online ISBN: 9780470294635

DOI: 10.1002/9780470294635

About this Book

Product Information

About The Product

This volume is part of the Ceramic Engineering and Science Proceeding  (CESP) series.  This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.

Table of contents

    1. You have free access to this content
      Frontmatter (pages i–xv)

  2. Part 1: Advanced Synthesis and Processing - Materials Synthesis

    1. Chapter 1

      Synthesis of Single Phase (Ba,Sr)TiO3, by a Reactive Process (pages 2–11)

      S. Bhaduri, W. A. Prisbrey, J. B. Jokisaari and S. B. Bhaduri

    2. Chapter 2

      Fabrication of Ceramic/Epoxy Photonic Crystals by Stereolithgraphy (pages 13–17)

      Soshu Kirihara, Yoshinari Miyamoto and Kenji Kajiyama

    3. Chapter 3

      Unidirectionally Porous Oxides Prepared Using Eutectic Reactions (pages 19–24)

      Yoshikazu Suzuki, Toyoaki Yamada, Shunsaku Sakakibara and Tatsuki Ohji

    4. Chapter 4

      Plasma Jet Generation Over the Liquid Surface and Its Application to Diamond Synthesis (pages 25–30)

      Takeyuki Suzuki and Satoshi Wada

    5. Chapter 5

      Synthesis and Characterization of Fine-Grained 3Y-TZP/Hexaferrite in Situ Composites (pages 31–38)

      Yoshikazu Suzuki, Masanobu Awano, Naoki Kondo and Tatsuki Ohji

    6. Chapter 6

      Environment Conscious Ceramics (Ecoceramics) (pages 39–44)

      M. Singh

  3. Part 1: Advanced Synthesis and Processing - Materials Processing

    1. Chapter 7

      Suspension of Sic Powders in Allylhydridopolycarbosilane (Ahpcs): Control of Rheology (pages 45–52)

      Frances I. Hurwitz

    2. Chapter 8

      Biostructure Derived Ceramics (pages 53–60)

      H. Sieber, A. Kaindl and P. Greil

    3. Chapter 9

      Structural Ceramics Through Particle-Filled Preceramic Polymers: Supension and Particle Filtration Characterization (pages 61–66)

      M. Erdal, L. A. Ambrosoni and Z. Guo

    4. Chapter 10

      Texture Development in Reaction-Bonded Alumina (Rbao) Ceramics Via Templated Grain Growth (pages 71–78)

      Ender Suvaci and Gary L. Messing

    5. Chapter 11

      Oxidation and Transport Phenomena in the Reaction-Bonded Aluminum Oxide (Rbao) Process (pages 79–86)

      Ender Suvacr, George Simkovich and Gary L. Messing

    6. Chapter 12

      Two-Phase Materials in the Alumina-Yttria System Produced by Mechanical Alloying (pages 87–94)

      J. Alkebro, R. Warren, S. Begin-Colin and A. Mocellin

    7. Chapter 13

      Spark Plasma Sintering of Mullite-Zirconia-TiO2 Ceramics (pages 95–102)

      E. Rocha-Rangel, H. Balmori-Ramírez, S. D. De La Torre, H. Miyamoto, M. Umemoto and K. Tsuchiya

    8. Chapter 14

      Fabrication of Channel Structures in Ceramics That Were Sintered and Joined by Microwave Heating (pages 103–110)

      Jong-Gi Lee, E. D. Case, H. W. Shin and P. Kwon

  4. Part 1: Advanced Synthesis and Processing - Solid Freeform Fabrication

    1. Chapter 15

      Solid Freeform Fabrication and Design (pages 111–119)

      Susanna Ventura, Subhash Narang, Fred F. Lange, Elaine Cohen, Douglas Twait and Pramod Khandelwal

    2. Chapter 16

      Extrusion Freeform Fabrication of Functional Ceramic Prototypes (pages 121–128)

      R. Vaidyanathan, J. L. Lombardi, J. Walish, S. Kasichainula, P. Calvert and K. Cooper

    3. Chapter 17

      Light Weight Ceramic Composites from Laminated Paper Structures (pages 129–134)

      H. Sieber, H. Friedrich, J. Zeschky and P. Greil

    4. Chapter 18

      Solid Freeform Fabrication of Advanced Ceramics (pages 135–142)

      Charles Gasdaska, Vikram Jamalabad, Doug Twait, Milt Ortiz and Boris Mitlin

    5. Chapter 19

      Solid Freeform Fabrication of a Telescoping Actuator Via Laminated Object Manufacturing (pages 143–150)

      Barry A. Bender, Roy J. Rayne and Carl CM. Wu

    6. Chapter 20

      Solid Freeform Fabrication of Intermetallics and Their Ceramic Composites by Reactive Rapid Prototyping (pages 151–158)

      Kiyotaka Matsuura, Masayuki Kudoh, Soshu Kirihara and Yoshinari Miyamoto

    7. Chapter 21

      Design Tools for Multi-Material Layered Manufacturing System (pages 159–166)

      Noshir A. Langrana, Dan Qiu, Stephen C. Danforth, Ahmad Safari, Wenbiao Han and Mohsen A. Jafari

  5. Part 1: Advanced Synthesis and Processing - Wear Resistant Coatings

    1. Chapter 22

      The Influence of Substrate Microstructure on the Crack Formation of CrN Coatings on Brass. (pages 167–175)

      Saki Krishnamurthy and Ivar E. Reimanis

    2. Chapter 23

      Environmentally Benign Ceramic Composite Coatings with Advanced Tribological Properties (pages 177–184)

      D. F. Scherer, R. Gadow and A. Killinger

    3. Chapter 24

      Reactive Coating of SiC on Diamond Particles (pages 185–192)

      Y. Miyamoto, J. Lin, H. Moriguchi, A. Ikegaya, Y. Yamashita, T. Kashiwagi and O. Yamaguchi

    4. Chapter 25

      Determination of Strength of Double-Layer Brittle Coatings on Metallic Substrates by Four-Point Bend Test (pages 193–202)

      Ö. Ünal and D. J. Sordelet

  6. Part 1: Advanced Synthesis and Processing - Interface Debond Coutings: Oxide

    1. Chapter 26

      Monazite and Scheelite Deformation Mechanisms (pages 203–217)

      R. S. Hay

    2. Chapter 27

      Porous Rare-Earth Aluminate Fiber Coatings for Oxide-Oxide Composites (pages 219–228)

      Michael K. Cinibulk, Triplicane A. Parthasarathy, Kristin A. Keller and Tai-Ii Mah

    3. Chapter 28

      Monazite Coatings on Nextel 720™, 610™, and Tyranno-Sa Fiber Tows; Effects of Precursors on Fiber Strength (pages 229–236)

      E. E. Boakye, M. D. Petry, R. S. Hay and L. M. Douglas

    4. Chapter 29

      Mg-Si-Al-O Coatings on Hi-Nicalon SiC Fiber by Alkoxide Method (pages 237–242)

      Naoki Igawa, Tomitsugu Taguchi, Reiji Yamada and Shiro Jitsukawa

    5. Chapter 30

      Effects of Mullite/ Ysz Coatings on the Performance of Sic/ Sic Composite Combustion Liners (pages 243–250)

      L. C. Russell, J. Sankar, R. A. Miller, D. Zhu and A. Calomino

    6. Chapter 31

      Surface Characterization of Plasma Sprayed Hydroxyapatite Coatings (pages 251–258)

      Limin Sun, Christopher C. Berndt, A. Kucuk, R. S. Lima and K. A. Khor

  7. Part 1: Advanced Synthesis and Processing - Interface Debond Coatings: Non-Oxide

    1. Chapter 32

      Effect of Multiple Coating Interfacial Structures on Bending Property of Fcvi SiC/SiC Composites (pages 259–266)

      Wen Yang, Hiroshi Araki, J. Y. Park, Tetsuji Noda, Akira Kohyama and Jinnan Yu

    2. Chapter 33

      BN and SiBN Fiber Coatings Via Cvd Using a Single Source, Liquid Precursor Based on Borazine (pages 267–274)

      Frances I. Hurwitz, Donald R. Wheeler, Terry R. Mccue, Y. L. Chen, Paul V. Chayka and Chongying Xu

    3. Chapter 34

      Silicon Carbide Fibers with Boron Nitride Coatings (pages 275–281)

      Michael D. Sacks and John J. Brennan

    4. Chapter 35

      Optimization of New Precursor Systems for Continuous Fluid Carbon Fiber Coating (pages 283–290)

      Nataša Doslik, Ralph Fischer and Rainer Gadow

  8. Part 1: Advanced Synthesis and Processing - Fiber/Whisker Synthesis and Characterization

    1. Chapter 36

      Fabrication and Mechanical Properties of Si-M-C-(O) Tyranno Fibers (pages 291–298)

      K. Kumagawa, H. Yamaoka, M. Shibuya, M. Suzuki and T. Yamamura

    2. Chapter 37

      Prototype Reactor for Scale-Up of Si-N-O Fiber Production (pages 299–306)

      A. Vital, U. Vogt, T. Graule, W. Graehlert, M. Leparoux, V. Hopfe, H. C. Ewing, R. Daum and A. Beil

    3. Chapter 38

      Special Modified Silazanes for Coatings, Fibers and CMC'S (pages 307–314)

      G. Motz, J. Hacker and G. Ziegler

    4. Chapter 39

      Cvd Process for Si-N-O Fiber Growth Controlled by In-Situ Ftir Spectroscopic Monitoring (pages 315–322)

      U. Vogt, A. Vital, T. Graule, W. Graehlert, M. Leparoux, V. Hopfe, H. C. Ewing, R. Daum and A. Beil

    5. Chapter 40

      High Heat-Resistant SiC-Polycrystalline Fiber and Its Fiber-Bonded Ceramic (pages 323–330)

      Toshihim Ishikawa, Shinji Kajii and Terumi Hisayuki

    6. Chapter 41

      Creep Behavior of Polymer-Derived SiC-Based Fibers (pages 331–338)

      Michael D. Sacks and Greg A. Staab

    7. Chapter 42

      Chemical and Thermo-Mechanical Properties of SiC-Based Reinforcements (pages 339–345)

      G. Chollon and R. Naslain

    8. Chapter 43

      Thermostructural Behavior of Sic Fiber Fabrics and Implications for Cmc (pages 347–362)

      H. M. Yun and J. A. Dicarlo

    9. Chapter 44

      Nextel™ 650 Ceramic Oxide Fiber: New Alumina-Based Fiber for High Temperature Composite Reinforcement (pages 363–373)

      D. M. Wilson and L. R. Visser

    10. Chapter 45

      Synthesis and Characterisation of TiB2 Whiskers (pages 375–382)

      Mats Carlsson and Mats Johnsson

  9. Part 2: Monolithic Structural Materials - Oxide Based Ceramics

    1. Chapter 46

      Environmental Effects on Crack Propagation of Alumina Ceramics (pages 384–396)

      M. E. Ebrahimi, J. Chevalier and G. Fantozzi

    2. Chapter 47

      Strengths and Deformation of Single Crystal Oxides at Ambient and Elevated Temperatures for Refractive Solar Concentrator Applications (pages 397–405)

      Sung R. Choi, Dongming Zhu and Robert A. Miller

    3. Chapter 48

      Electrokinetic Aspect of Friction and Wear of Oxide Ceramics (pages 407–414)

      Saša Novak and Jožef Vižintin

  10. Part 2: Monolithic Structural Materials - Processing and Structure

    1. Chapter 49

      Conformation of Honey-Rod (pages 415–421)

      Rodriguez C. Martìn, Rocha R. Enrique and Roberto T. Hernández

    2. Chapter 50

      Transparent MgAl2O4 Spinel — Revisited (pages 423–430)

      Mark C. L. Patterson, Jenni E. Caiazza, Don W. Roy and Gary Gilde

    3. Chapter 51

      Processing of Bone Ash Based Dental Implant Material with Zirconia Addition (pages 431–437)

      Recep Artir, Yilmaz Karakas and Cuma Bindal

    4. Chapter 52

      The Effects of Waste Loading on the Durability of Nuclear Waste Glasses (pages 439–445)

      Greg Darby, David E. Clark and George G. Wicks

    5. Chapter 53

      Glass-Ceramics in the System Ca5[PO4]3F — CaAl2Si2O8 -CaMgSi2O6 (pages 447–454)

      Dilshat Tulyaganov and Cinvestav Saltillo

    6. Chapter 54

      Martensitic Transformation of Y4Al2O9 (pages 455–460)

      M. Shimada, H. Yamane and B. A. Hunter

    7. Chapter 55

      Microstructure Control of Alumina Ceramics (pages 461–468)

      Satoshi Iio, Hiroshi Yamamoto and Takeshi Mitsuoka

    8. Chapter 56

      On the Mechanism of MoSiz Pesting in the Temperature Range 400–500°C. (pages 469–476)

      K. Hansson, M. Halvarsson, J. E. Tang, J. E. Svensson, M. Sundherg and R. Poinpe

    9. Chapter 57

      An Investigation of the Microstructure in the Pest Oxide of a MoSi2- Based Composite (pages 477–484)

      Jun Eu Tang, Mats Halvarsson, Anders Kvist, Kristina Hansson, Jan-Erik Svensson and Robert Pompe

  11. Part 2: Monolithic Structural Materials - Non-Oxide Bused Ceramics

    1. Chapter 58

      Gelcast AS800 Materials Characterization for Rocket Engine Applications (pages 485–496)

      Simin Rachel Khoshbin

    2. Chapter 59

      Intermediate Temperature Inert Strength and Dynamic Fatigue of Candidate Silicon Nitrides for Diesel Exhaust Valves (pages 497–508)

      A. A. Wereszczak, T. P. Kirkland, H.-T. Lin and S. K. Lee

    3. Chapter 60

      Superplastically Sinter-Forged Silicon Nitride (pages 509–514)

      Naoki Kondo, Yoshikazu Suzuki and Tatsuki Ohji

    4. Chapter 61

      Creep Resistant Silicon Nitride Ceramics — Approaches of Microstructural Design (pages 515–526)

      A. Rendtel and H. Hübner

    5. Chapter 62

      Testing and Finite Element Analysis of Sintered Silicon Nitride Specimens Under Four-Point Bending (pages 527–536)

      J. Lua, J. Sankar, S. Yarmolenko, W. Windley, D. Pai and L. C. Russell

    6. Chapter 63

      Effect of Heat-Treatment on Creep Behavior of a Self-Reinforced Silicon Nitride (Si3N4) (pages 537–544)

      Q. Wei, J. Sankar and J. Narayan

    7. Chapter 64

      Material Design to Improve Wear Resistance of Silicon Nitride with Cvd Coatings (pages 545–552)

      P. K. Mehrotra

    8. Chapter 65

      Environmental Effects on the Mechanical Properties of SiC-Based Hot Gas Cleaning Filters (pages 553–560)

      P. H. Pastila, A.-P. Nikkilä and T. A. Mäntylä

    9. Chapter 66

      Corrosion of Ceramic Filters for Hot Cleaning in Thermal Power Plants (pages 561–568)

      Laura Montanaro, Alfredo Negro, Olivier Frantz, Paul Billard and Rouzbeh Rezakhanlou

    10. Chapter 67

      Tribochemical Wear of Boron Carbide in Sliding Contacts (pages 569–574)

      P. Larsson and N. Axén

    11. Chapter 68

      Preceramic-Modified Reaction-Bonded Silicon Nitride (PM-RBSN): Processing and Properties with Focus on Long-Term High-Temperature Stability (pages 575–582)

      Gerhard Wötting, Lothar Schönfelder and Andreas Herzog

    12. Chapter 69

      Shaping Srbsn Parts by a Closed-Mold Casting Method (pages 583–588)

      Gary M. Crosbie and G. T. Bretz

    13. Chapter 70

      Joining of Non-Oxide Ceramics Using Conventional and Microwave Heating (pages 589–597)

      Jong-Gi Lee and E. D. Case

    14. Chapter 71

      Microwave Sntering at High Temperature (pages 599–606)

      H. E. Huey, Q. S. Wang, M. S. Morrow and D. E. Schechter

    15. Chapter 72

      Processtng and Mechanical Properties of Silicon Nitride Formed by Robocasting Aqueous Slurries (pages 607–614)

      Guoping He, Deidre A. Hirschfeld and Joseph Cesarano

    16. Chapter 73

      Influence of Boron and Carbon on the Oxidation of Smtered Silicon Carbide at 1500°C (pages 615–622)

      C. Schumacher and K. G. Nickel

    17. Chapter 74

      Thermophysical and Thermomechanical Properties of Thermal Barrier Coating Systems (pages 623–633)

      Dongming Zhu and Robert A. Miller

    18. Chapter 75

      Thermal Fatigue Testing of Layer-Graded Thick Thermal Barrier Coating Systems (pages 635–643)

      Robert A. Miller, Dongming Zhu, John G. Goedjen, Anthony M. Calomino and Thomas A. Cruse

    19. Chapter 76

      Microstructure, Mechanical and Thermal Properties of Unidirectionally Alligned Silicon Nitride (pages 645–652)

      Soo W. Lee, Sang Yang Lee, Yong Ho Choa, Koichi Niihara, Dong-Soo Park and Bernard J. Hockey

    20. Chapter 77

      Deformation and Strength Behavior of Plasma-Sprayed ZrO2-8wt% Y2O3 Thermal Barrier Coatings in Biaxial Flexure and Trans- Thickness Tension (pages 653–661)

      Sung R. Choi, Dongming Zhu and Robert A. Miller

    21. Chapter 78

      Residual Stress Charaterization of Thermal Barrier Coatings — Comparison of Thermally Sprayed, EB-PVD and CVD Based Coatings (pages 663–670)

      Michael Buchmann, Christian Friedrich and Rainer Gadow

    22. Chapter 79

      Rapid, Cost-Effective Silicon Carbide Optical Component Manufacturing Technique (pages 671–679)

      John Casstevens, Matt Ferber and Ralph Dinwiddie

    23. Chapter 80

      Deformation Characteristics of Plasma Sprayed Thermal Barrier Coatings (pages 681–689)

      A. Kucuka, C. C. Berndt, U. Senturk, R. S. Lima and C. R. C. Lima

    24. Chapter 81

      Improvement of High Temperature Corrosion Resistance of Carbon by Ceramic Oxides Coats (pages 691–698)

      N. Bahlawane and T. Watanabe

SEARCH