Advances in Solid Oxide Fuel Cells V

Copyright © 2010 The American Ceramic Society. All rights reserved.

Advances in Solid Oxide Fuel Cells V

Editor(s): Narottam P. Bansal, Prabhakar Singh, Dileep Singh, Jonathan Salem

Published Online: 14 JAN 2010

Print ISBN: 9780470457542

Online ISBN: 9780470584316

DOI: 10.1002/9780470584316

About this Book

Product Information

About The Product

This volume contains twenty four papers with contributions on various aspects of solid oxide fuel cells that were discussed at the symposium. You will gain insight into the current status of solid oxide fuel cells technology and the latest developments in the areas of fabrication, characterization, testing, performance, electrodes, electrolytes, seals, cell and stack development, proton conductors, fuel reforming, mechanical behavior, powder synthesis, etc.

Table of contents

    1. You have free access to this content
      Front Matter (pages i–xii)

  2. Part 1: Cell and Stack Development/Performance

    1. Development of Novel Planar Nano-Structured SOFCs (pages 1–25)

      Tim Van Gestel, Doris Sebold, Wilhelm A. Meulenberg and Hans-Peter Buchkremer

    2. Advanced Cell Development for Increased Direct JP-8 Performance in the Liquid Tin Anode SOFC (pages 27–35)

      M. T. Koslowske, W. A. McPhee, L. S. Bateman, M. J. Slaney, J. Bentley and T. T. Tao

    3. Fundamentals of Liquid Tin Anode Solid Oxide Fuel Cell (LTA-SOFC) Operation (pages 37–52)

      Randall Gemmen, Harry Abernathy, Kirk Gerdes, Mark Koslowske, William A. McPhee and Tomas Tao

    4. A No Chamber Fuel Cell Using Ethanol as Flame (pages 53–62)

      Kang Wang, Jeongmin Ahn and Zongping Shao

  3. Part 2: Characterization/Testing

    1. Surface Enhanced Raman Spectroscopy for Investigation of SOFC Cathodes (pages 63–73)

      Kevin S. Blinn, Harry W. Abernathy and Meilin Liu

    2. Characterization of an Anode-Supported Planar Solid Oxide Fuel Cell with a Porosity Concentration Gradient (pages 75–81)

      Chung Min An, Jung-Hoon Song, Inyoung Kang and Nigel Sammes

    3. Impact of Protective and Contacting Layers on the Long-Term SOFC Operation (pages 83–93)

      Mihails Kusnezoff, Stefan Megel, Viktar Sauchuk, Egle Girdauskaite, Wieland Beckert and Andreas Reinert

    4. Curvature Evolution and Control in Anode Supported Solid Oxide Fuel Cells (pages 95–104)

      Marco Cologna, Anna Rita Contino, Vincenzo M. Sglavo, Stefano Modena, Sergio Ceschini and Massimo Bertoldi

    5. Phase-Boundary Grooving at Surfaces of Solid Oxide Fuel Cell Materials (pages 105–112)

      Sanjit Bhowmick, Jessica L. Riesterer, Yuan Xue and C. Barry Carter

  4. Part 3: Electrodes

    1. Mixed Proton-Oxide Ion-Electron Conducting Cathode for SOFCs Based on Oxide Proton Conductors (pages 113–120)

      Lei Yang, Shizhong Wang, Ze Liu, Chendong Zuo and Meilin Liu

    2. Permeation and Stability Investigation of Ba0,5Sr0,5Co0,8Fe0,2O3-σ Membranes for Oxy-Fuel Processes (pages 121–127)

      A. Ellett, D. Schlehuber, L. Singheiser and T. Markus

    3. Numerical Continuum Modeling and Simulation of Mixed-Conducting Thin Film and Patterned Electrodes (pages 129–138)

      Matthew E. Lynch, David S. Mebane and Meilin Liu

    4. Laminar Flow and Total Pressure Effects in Solid Oxide Fuel Cell Electrode Pores and Their Effects on Voltage-Current Characteristics (pages 139–151)

      V. Hugo Schmidt, R. R. Chien and Laura M. Lediaev

  5. Part 4: Oxide/Proton Conductors

    1. Temperature and Pressure Assisted Cubic to Rhombohedral Phase Transition in Sc0.1Ce0.01ZrO2 by Micro-Raman (pages 153–166)

      Svetlana Lukich, Cassandra Carpenter and Nina Orlovskaya

    2. Synthesis and Activity of Cobalt-Doped Barium Cerium Zirconate for Catalysis and Proton Conduction (pages 167–173)

      Aravind Suresh, Joysurya Basu, Nigel M. Sammes, C. Barry Carter and Benjamin A. Wilhite

    3. In Situ X-Ray Diffraction and Raman Spectroscopy of LiF-Added Ba(Zr0.7Ce0.1Y0.2)O2.9 Ceramics (pages 175–181)

      C.S. Tu, S. C. Lee, C.-C. Huang, R. R. Chien, V. H. Schmidt and C.-L. Tsai

  6. Part 5: Seals

    1. Sealing Glasses for SOFC – Degradation Behaviour (pages 183–193)

      Jochen Schilm, Axel Rost, Mihails Kusnezoff and Alexander Michaelis

    2. Determination of Fracture Strength of Glass-Ceramic Sealant Used in SOFC (pages 195–201)

      Kais Hbaieb

    3. Creep Behavior of Glass/Ceramic Sealant Used in Solid Oxide Fuel Cells (pages 203–209)

      W.N. Liu, X. Sun, B. Koeppel and M.A. Khaleel

    4. Thermal Cycle Durability of Glass/Ceramic Composite Gas-Tight Seals on Metal Substrates (pages 211–218)

      Seiichi Suda, Masahiko Matsumiya, Koichi Kawahara and Kaori Jono

  7. Part 6: Mechanical Behavior

    1. Mechanical Properties of Cathode-Interconnect Interfaces in Planar SOFCs (pages 219–229)

      Yanli Wang, Beth L. Armstrong, Rosa M. Trejo, Jianming Bai, Thomas R. Watkins and Edgar Lara-Curzio

  8. Part 7: Materials Synthesis

    1. Synthesis and Characterization of Oxide Nanoparticles for Energy Applications (pages 231–238)

      Joysurya Basu, Jonathan P Winterstein, Sanjit Bhowmick and C. Barry Carter

    2. Glycine-Nitrate Synthesis and Characterization of Ba(Zr0.8-xCexY0.2)O2.9 (pages 239–248)

      R. R. Chien, V. Hugo Schmidt, S.-C. Lee, C.-C. Huang and Stachus P. Tu

  9. Part 8: Fuel Reforming

    1. Carbon Dioxide Reforming of Methane on Nickel-Ceria-Based Oxide Cermet Anode for Solid Oxide Fuel Cells (pages 249–260)

      Mitsunobu Kawano, Hiroyuki Yoshida, Koji Hashino, Toru Inagaki, Hideyuki Nagahara and Hiroshi Ijichi

    1. You have free access to this content
      Author Index (pages 261–262)

SEARCH