Steel Designers' Manual: The Steel Construction Institute, Sixth Edition

Copyright © 2003 The Steel Construction Institute

Steel Designers' Manual: The Steel Construction Institute, Sixth Edition

Editor(s): Buick Davison, Graham W. Owens

Published Online: 11 FEB 2008

Print ISBN: 9781405134125

Online ISBN: 9780470775097

DOI: 10.1002/9780470775097

About this Book

Product Information

About The Product

This classic manual on structural steel design provides a major source of reference for structural engineers and fabricators working with the leading construction material. Based fully on the concepts of limit state design, the manual has been revised to take account of the 2000 revisions to BS 5950. It also looks at new developments in structural steel, environmental issues and outlines the main requirements of the Eurocode on structural steel.

Table of contents

    1. You have free access to this content
      Frontmatter (pages i–xxx)

  2. Part I: Design Synthesis

    1. Chapter 1

      Single-Storey Buildings (pages 1–41)

      Graham Raven and Alan Pottage

    2. Chapter 2

      Multi-Storey Buildings (pages 42–93)

      Alan Hart and Philip Peacock

    3. Chapter 3

      Industrial Steelwork (pages 94–123)

      John Roberts

    4. Chapter 4

      Bridges (pages 124–168)

      Alan Hayward

    5. Chapter 5

      Other Structural Applications of Steel (pages 169–221)

      Ian Duncan, Michael Green, Eric Hindhaugh, Ian Liddell, Gerard Parke, John Tyrrell and Matthew Lovell

  3. Part II: Steel Technology

    1. Chapter 6

      Applied Metallurgy of Steel (pages 222–247)

      Michael Burdekin

    2. Chapter 7

      Fracture and Fatigue (pages 248–274)

      John Yates

    3. Chapter 8

      Sustainability and Steel Construction (pages 275–285)

      Graham Raven

  4. Part III: Design Theory

    1. Chapter 9

      Introduction to Manual and Computer Analysis (pages 286–324)

      Rangachari Narayanan

    2. Chapter 10

      Beam Analysis (pages 325–341)

      John Righiniotis

    3. Chapter 11

      Plane Frame Analysis (pages 342–353)

      John Righiniotis

    4. Chapter 12

      Applicable Dynamics (pages 354–372)

      Michael Willford

  5. Part IV: Element Design

    1. Chapter 13

      Local Buckling and Cross-Section Classification (pages 373–382)

      David Nethercot

    2. Chapter 14

      Tension Members (pages 383–401)

      John Righiniotis

    3. Chapter 15

      Columns and Struts (pages 402–430)

      David Nethercot

    4. Chapter 16

      Beams (pages 431–469)

      David Nethercot

    5. Chapter 17

      Plate Girders (pages 470–510)

      Terence M. Roberts and Rangachari Narayanan

    6. Chapter 18

      Members with Compression and Moments (pages 511–540)

      David Nethercot

    7. Chapter 19

      Trusses (pages 541–576)

      Paul Tasou

    8. Chapter 20

      Composite Deck Slabs (pages 577–600)

      Mark Lawson and Peter Wickens

    9. Chapter 21

      Composite Beams (pages 601–650)

      Mark Lawson and Peter Wickens

    10. Chapter 22

      Composite Columns (pages 651–670)

      Mark Lawson and Peter Wickens

  6. Part V: Connection Design

    1. Chapter 23

      Bolts (pages 671–684)

      Hubert Barber

    2. Chapter 24

      Welds and Design for Welding (pages 685–710)

      Ralph B. G. Yeo and Hubert Barber

    3. Chapter 25

      Plate and Stiffener Elements in Connections (pages 711–720)

      Brian Cheal

    4. Chapter 26

      Design of Connections (pages 721–815)

      David Moore

    5. Chapter 27

      Foundations and Holding-Down Systems (pages 816–841)

      Hubert Barber

  7. Part VI: Other Elements

    1. Chapter 28

      Bearings and Joints (pages 842–866)

      Stephen Matthews

    2. Chapter 29

      Steel Piles (pages 867–905)

      Tony Biddle and Ed Yandzio

    3. Chapter 30

      Floors and Orthotropic Decks (pages 906–916)

      Dick Stainsby

  8. Part VII: Construction

    1. Chapter 31

      Tolerances (pages 917–947)

      Colin Taylor

    2. Chapter 32

      Fabrication (pages 948–970)

      David Dibb-Fuller

    3. Chapter 33

      Erection (pages 971–1012)

      Alan Rogan

    4. Chapter 34

      Fire Protection and Fire Engineering (pages 1013–1029)

      Jef Robinson

    5. Chapter 35

      Corrosion and Corrosion Prevention (pages 1030–1052)

      Roger Hudson and Ken Johnson

    6. Chapter 36

      The Eurocodes (pages 1053–1068)

      Colin Taylor and Mike Banfi

    1. You have free access to this content
      Appendix (pages 1069–1321)

    1. You have free access to this content
      Index (pages 1323–1337)

SEARCH