Characterization and Control of Interfaces for high quality advanced materials III

Characterization and Control of Interfaces for high quality advanced materials III

Editor(s): Kevin Ewsuk, Makio Naito, Tomoyuki Kakeshita, Soshu Kirihara, Keizo Uematsu, Hiroya Abe

Published Online: 29 SEP 2010 10:11AM EST

Print ISBN: 9780470909171

Online ISBN: 9780470917145

DOI: 10.1002/9780470917145

About this Book

This proceedings volume features 59 peer-reviewed papers from ICCCI2009 on interface characterization and control technology, powder and composite processing, joining, the control of airborne particulates, new metallic glasses, and interface phenomena at high temperature. ICCCI2009 was supported by the Global COE Program "Center of Excellence for Advanced Structural and Functional Materials Design" lead by Professor Tomoyuki Kakeshita at Osaka University, the Project on Joining Technology for New Metallic Glasses and Inorganic Materials, the Institute of Materials Research (IMR) of Tohoku University, the Materials and Structures Laboratory (MSL) of the Tokyo Institute of Technology, Kobe Gakuin University, Hosokawa Powder Technology Foundation, the Japan JSPS 124th Committee, and the Joining and Welding Research Institute (JWRI) of Osaka University. Over 160 scientists and engineers from academia and industry from 18 different countries attended ICCCI2009 to see and discuss 140 invited and contributed presentations and posters on the state-of-the-art of interface characterization and control for particulate materials, joining, and nanotechnology.

Table of contents

    1. You have free access to this content
    2. Formation of Bone-Like Hydroxyapatite on Surface-Modified Bulk Metallic Glass Using a Hydrothermal-Electrochemical Method (pages 23–28)

      Nobuhiro Matsushita, Naota Sugiyama, Sayaka Maruyama, Rieko Ito, Kenichi Katsumata, Masahiro Yoshimura, Masahiro Tsukamoto, Xinmin Wang, Takeshi Wada, Akihisa Inoue and Kiyoshi Okada

    3. Low Temperature Bonding of Bulk Metallic Glass Using an Ultrasonic Process (pages 29–35)

      Hiroshi Nishikawa, Krit WongPiromsarn, Hiroya Abe, Tadashi Takemoto, Masao Kubo, Yoshiharu Sanagawa, Takamasa Sakai, Mikio Fukuhara and Akihisa Inoue

    4. Nanostructured (Y1-xGdx)2O3: Eu3+ Powders Obtained through Aerosol Synthesis (pages 83–90)

      Katarina R. Marinkovic, Lidija T. Mancic, Maria Eugenia Rabanal, Luz Gomez, Miroslav Dramicanin and Olivera B. Milosevic

    5. Preparation of ZnO/Al2O3 Nanocomposite Particles by Mechanical Treatment (pages 151–154)

      Satoko Tasaki, Junichi Tatami, Hiromi NakanO, Toru Wakihara, Katsutoshi Komeya and Takeshi Meguro

    6. Hard X-Ray Photoelectron Spectroscopy Analysis for Organic- Inorganic Hybrid Materials Formation (pages 183–188)

      Ken Cho, Kosuke Takenaka, Yuichi Setsuhara, Masaharu Shiratani, Makoto Sekine, Masaru Hori, Eiji Ikenaga, Hiroki Kondo, Osamu Nakatsuka and Shigeaki Zaima

    7. Novel Recycling Process of Waste FRP for Advanced Materials (pages 229–235)

      Akira Kondo, Hiroya Abe, Makio Naito, Yasuko Okuni, Masashi Miura and Norifumi Isu

    8. Structure and Photochemical Properties of a TiO2-ln2O3-SnO2-Al2O3 Film Prepared by Electrolysis of an Aqueous Solution (pages 337–343)

      Naoki Matsunaga, Keigo Oshiro, Yoshihiro Hirata, Yousuke Fukuda, Soichiro Sameshima, Toshifumi Yoshidome and Takamasa Ishigaki

    9. Design and Reliability of Layered Ceramics (pages 363–371)

      YN. Kim, H.G. Shin, J.K. Song, M.C. Shin, B.K. Shin, T.M. Noh and H.S. Lee

    10. Metallic Bonding with the Use of Copper Compound Powders (pages 373–377)

      Kazuaki Ihara, Y. Kobayashi, N. Shibamiya, M. Minato, Y. Yasuda, T. Morita and S. Yamada

    11. You have free access to this content

SEARCH