Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials IV: Ceramic Engineering and Science Proceedings, Volume 31

Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials IV: Ceramic Engineering and Science Proceedings, Volume 31

Editor(s): Tatsuki Ohji, Mrityunjay Singh, Sanjay Mathur

Published Online: 19 NOV 2010 04:21PM EST

Print ISBN: 9780470594735

Online ISBN: 9780470944066

DOI: 10.1002/9780470944066

About this Book

This issue contains 25 invited and contributed papers, all peer reviewed according to the American Ceramic Society Review Process. The latest developments in processing and manufacturing technologies are covered, including green manufacturing, smart processing, advanced composite manufacturing, rapid processing, joining, machining, and net shape forming technologies.  These papers discuss the most important aspects necessary for understanding and further development of processing and manufacturing of ceramic materials and systems.

Table of contents

    1. You have free access to this content
  1. Part I: Green Manufacturing and Smart Processing

    1. Mechanical Properties of Cr-Si-N-O Thin Films Deposited by RF Reactive Unbalanced Magnetron Sputtering (pages 15–21)

      Jun Shirahata, Tetsutaro Ohori, Hiroki Asami, Tsuneo Suzuki, Tadachika Nakayama, Hisayuki Suematsu and Koichi Niihara

  2. Part II: Advanced Composite Manufacturing

    1. Manufacturing of the CMC Nose Cap for the Expert Spacecraft (pages 59–71)

      Christian Zuber, Thomas Reimer, Kornelia Stubicar, Bernhard Heidenreich and Hermann Hald

    2. Melt-Infiltration Processing of Titanium Carbide-Stainless Steel Cermets (pages 97–104)

      Tyler Stewart, R. Bradley Collier, Zoheir N. Farhat, Georges J. Kipouros and Kevin P. Plucknett

  3. Part III: Rapid Processing

    1. Rapid Manufacturing of Ceramic Parts by Selective Laser Melting (pages 137–148)

      Jan Wilkes, Yves-Christian Hagedorn, Sörn Ocylok, Wilhelm Meiners and Konrad Wissenbach

  4. Part IV: Joining and Machining

    1. Production Environment Laser Assisted Machining of Silicon Nitride (pages 183–193)

      Federico Sciammarella, Joe Santner, Jeff Staes, Richard Roberts, Frank Pfefferkorn, Stephen T. Gonczy, Stefan Kyselica and Ricardo Deleon

  5. Part V: Net Shape Forming

    1. You have free access to this content

SEARCH