Fatigue of Materials: Advances and Emergences in Understanding

Copyright © 2010 The Minerals, Metals, & Materials Society. All rights reserved

Fatigue of Materials: Advances and Emergences in Understanding

Editor(s): T.S. Srivatsan, M. Ashraf Imam

Published Online: 10 NOV 2010 09:55AM EST

Print ISBN: 9780470943182

Online ISBN: 9781118013373

DOI: 10.1002/9781118013373

About this Book

Product Information

About The Product

Fatigue of Materials covers a broad spectrum of topics that represent the truly diverse nature of the subject that has grown to become a key area of scientific and applied research. Constituting an international forum for the materials industry, the book provides the perspectives of operators, engineers, and researchers regarding all aspects of current and emerging technologies for materials.

Table of contents

    1. You have free access to this content
      Front Matter (pages i–xii)

  2. Part I: Mechanisms and Mechanics of Understanding Crack Initiation and Crack Propagation

    1. Fundamentals of Fatigue Crack Initiation and Propagation: A Review (pages 1–18)

      C. S. Pande, M.A. Imam and T. S. Srivatsan

    2. Experimental and Micromechanics Analysis on Fatigue Crack Propagation Behavior in Sn-Ag Eutectic Solder (pages 19–28)

      Yao Yao, Semyon Vaynman, Leon M. Keer and Morris E. Fine

    3. Environmental Effects on Fatigue Crack Growth in 7075 Aluminum Alloy (pages 29–41)

      F. Wang, J.J. Williams and N. Chawla

    4. Linearity of Fatigue Crack Growth Rates in the Near-Threshold Regime (pages 43–53)

      Ronald L. Holtz

    5. On the Fatigue Crack Growth in High-Manganese Austenitic TWIP Steel - Influence of the Microstructure (pages 55–66)

      Thomas Niendorf, Felix Rubitschek, Hans J. Maier and Andreas Frehn

    6. A New Formulation for Multi-Scale Fatigue Crack Growth Analysis (pages 67–83)

      Yongming Liu and Zizi Lu

    7. Corrosion Fatigue Crack Growth in Sensitized Al 5083 (pages 85–91)

      P.S. Pao, R. Goswami, R.A. Bayles, T.M. Longazel and R.L. Holtz

    8. On the Mechanisms of Fatigue Crack Propagation in Structural Materials (pages 93–110)

      Anastasios G. Gavras and Diana A. Lados

  3. Part II: Fatigue Analysis: Role of Material, Microstructure and Environment

    1. Modified Kitagawa Diagram and the Transition from Crack Nucleation to Crack Propagation (pages 111–120)

      K. Sadananda and A.K. Vasudevan

    2. The High Cycle Fatigue and Final Fracture Behavior of Alloy Steel 4140 used in Hydrogen Pressure Vessels: Influence of Copper Plating (pages 121–145)

      T.S. Srivatsan, Nurudeen Balogun, Amit Prakash, B. Deeken and T. Quick

    3. The Cyclic Fatigue, Damage Initiation, Propagation and Fracture Behavior of Cryomilled Aluminum Alloy 5083: Influence of Secondary Processing (pages 147–168)

      Troy D. Topping, Enrique J. Lavernia, M. Kuruvilla and T. S. Srivatsan

    4. The High Cycle Fatigue and Final Fracture Behavior of an Alloy Steel Used in Hydrogen Pressure Vessels: Influence of Notch (pages 169–191)

      Nurudeen Balogun, T.S. Srivatsan, Amit Prakash, B. Deeken and T. Quick

    5. Investigating and Understanding the Fatigue Response and Failure of Built-Up Welded Beams of a Titanium Alloy (pages 195–215)

      Anil Patnaik, N. Poondla, U. Bathini, T.S. Srivatsan and T. Quick

    6. The Effect of Strain Rate on Low Cycle Fatigue Life with Hold Time for USC Candidate Rotor Material (pages 217–229)

      Kuk-cheol Kim, Byeong-ook Kong, Min-soo Kim and Sung-tae Kang

  4. Part III: Mechanics and Mechanisms of Fatigue and Fracture I and II

    1. Investigation of Fatigue Mesoscopic Mechanical Properties of a Nickel-Based Superalloy by Instrumented Microindentation Measurements (pages 231–258)

      Duyi Ye, Haibo Cha, Lei Xiao and Xuandong Xu

    2. Fatigue Lives and Material Properties of Silicon Nitride Balls for Hybrid Bearing Applications (pages 259–271)

      Liang Xue and Gary L. Doll

    3. Multi-Axial Loading Effects in a Nickel-Based Disc Superalloy Subject to Proportional and Non-Proportional Load Paths (pages 273–287)

      Steve J. Pattison, Martin R. Bache, Steve J. Williams and Neil Fox

    4. Phase Transformation Theory Applied to Predict Fatigue Crack Propagation in Solid Materials (pages 289–298)

      Yao Yao, Leon M. Keer and Morris E. Fine

    5. Microstructure and Fatigue Behaviour in the Very High Cycle Fatigue Regime (pages 299–315)

      M. Zimmermann, C. Stöcker and H.-J. Christ

    6. Crack-Dislocation Interaction And It's Implication for a Fundamental Understanding of Fatigue (pages 317–325)

      Chandra S. Pande

    7. Clarification of the Fracture Plane of Dwell Fatigue Cracks in Titanium Alloys (pages 327–337)

      Adam L. Pilchak and James C. Williams

    8. The Cyclic Fatigue, Damage Initiation, Damage Propagation and Final Fracture Behavior of Aluminum Alloy 2524 (pages 339–354)

      T.S. Srivatsan, Nurudeen Balogun and T. Quick

    9. The Cyclic Fatigue and Final Fracture Behavior of a Titanium Alloy Taken from Weldments: Influence of Load Ratio and Orientation (pages 355–379)

      Udaykar Bathini, T.S. Srivatsan, Anil Patnaik, C.C. Menzemer and T. Quick

    10. Corrosion Fatigue Strength of 2.5 Percent Molybdenum Containing High Strength Austenitic Stainless Steel (pages 381–392)

      R. Ebara, K. Matsumoto, Y. Matsuda, Y. Mizuno and I. Nishimura

  5. Part IV: Fatigue Analysis and Fracture of Materials

    1. Importance of Inhomogeneity on Fatigue Strength of Bulk Metallic Glass (pages 393–409)

      Y. Nakai

    2. Application of Artificial Neural Network to Estimate the Fatigue Life of Shot Peened Ti-6Al-4V ELI Alloy (pages 411–417)

      Saber Amin Yavari, Navid Saeidi and Seied Hamidreza Maddah Hosseini

    3. In-Situ Optical Microscopy Study on Plastic Zone Size Estimation of Aluminum Alloy 7075-T6 under Cyclic Loading (pages 419–429)

      Wei Zhang, Zizi Lu and Yongming Liu

    1. You have free access to this content
      Author Index (pages 431–432)

    1. You have free access to this content
      Subject Index (page 433)

SEARCH