Magnesium Technology 2011

Magnesium Technology 2011

Editor(s): Wim H. Sillekens, Sean R. Agnew, Neale R. Neelameggham, Suveen N. Mathaudhu

Published Online: 26 APR 2011 09:07AM EST

Print ISBN: 9781118029367

Online ISBN: 9781118062029

DOI: 10.1002/9781118062029

About this Book

The Magnesium Technology Symposium, which takes place every year at the TMS Annual Meeting & Exhibition, is one of the largest yearly gatherings of magnesium specialists in the world. Papers are presented in all aspects of the field, ranging from primary production to applications to recycling. Moreover, papers explore everything from basic research findings to industrialization. Magnesium Technology 2011 covers a broad spectrum of current topics, including alloys and their properties; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; ecology; and structural applications. In addition, you'll find coverage of new and emerging applications in such areas as biomedicine and hydrogen storage.

Table of contents

    1. You have free access to this content
  1. Part I: Opening Session

  2. Part II: Primary Production: Characterization and Mechanical Performance

    1. Effect of KCl on Liquidus of LiF-MgF2 Molten Salts (pages 35–37)

      Shaohua Yang, Fengli Yang, Xianwei Hu, Zhaowen Wang, Zhongning Shi and Bingliang Gao

    2. Applicability of Mg-Zn-(Y, Gd) Alloys for Engine Pistons (pages 73–78)

      Kazutaka Okamoto, Masato Sasaki, Norikazu Takahashi, Qudong Wang, Yan Gao, Dongdi Yin and Changjiang Chen

  3. Part III: Casting and Solidification

    1. Investigations on Hot Tearing of Mg-Zn-(Al) Alloys (pages 125–130)

      Le Zhou, Yuanding Huang, Pingli Mao, Karl Ulrich Kainer, Zheng Liu and Norbert Hort

  4. Part IV: Alloy Design/Development; Grain Refinement and Severe Plastic Deformation

    1. Thermodynamic Analysis of As-cast and Heat Treated Microstructures of Mg-Ce-Nd Alloys (page 167)

      Mark A. Easton, Suming Zhu, Mark A. Gibson, Jian-Feng Nie, Joachim Gröbner, Artem Kozlov and Rainer Schmid-Fetzer

  5. Part V: High-Temperature Alloys; High-Strength Alloys; Precipitation

  6. Part VI: Deformation Mechanisms I

  7. Part VII: Deformation Mechanisms II: Formabilitv and Forming

  8. Part VIII: New Applications (Biomedical and Other)

    1. Design Considerations for Developing Biodegradable Magnesium Implants (page 401)

      Harpreet S. Brar, Benjamin G. Keselowsky, Malisa Sarntinoranont and Michele V. Manuel

    2. Magnesium Alloys For Bioabsorbable Stents: A Feasibility Assessment (pages 413–418)

      Charles Z. Deng, Rajesh Radhakrishnan, Steve R. Larsen, Dennis A. Boismer, Jon S. Stinson, Adrienne K. Hotchkiss, Eric M. Petersen, Jan Weber and Torsten Scheuermann

  9. Part IX: Advanced Materials and Processing

    1. Characterization of Hot Extruded Mg/SiC Nanocomposites Fabricated by Casting (pages 441–446)

      Sunya Nimityongskul, Noé Alba-Baena, Hongseok Choi, Milton Jones, Tom Wood, Mahi Sahoo, Roderic Lakes, Sindo Kou and Xiaochun Li

  10. Part X: Corrosion and Coatings

  11. Part XI: Poster Session

  12. Part XII: Addendum

    1. You have free access to this content
    1. You have free access to this content

SEARCH