Supplemental Proceedings: Materials Processing and Energy Materials, Volume 1

Copyright © 2011 The Minerals, Metals & Materials Society. All rights reserved.

Supplemental Proceedings: Materials Processing and Energy Materials, Volume 1

Author(s):

Published Online: 25 APR 2011 09:16AM EST

Print ISBN: 9781118029459

Online ISBN: 9781118062111

DOI: 10.1002/9781118062111

About this Book

Product Information

About The Product

Materials science and engineering professionals from around the world gathered at the TMS 2011 Annual Meeting & Exhibition to network, present the latest research and industrial applications, and collaborate on ways to further innovation and advancement in the field. The meeting featured more than 70 symposia and some 3,000 presentations. The Supplemental TMS 2011 Proceedings collect some of the most important papers presented at the meeting, giving readers the opportunity to benefit from the latest discoveries in mineral, metals, and materials research. Topics cover everything from minerals processing and primary metals production to basic research and advanced materials applications. Moreover, you'll learn about the latest research efforts within the industry to develop sustainable, environmentally friendly products and processes.

Table of contents

    1. You have free access to this content
      Front Matter (pages i–xvi)

  2. Part I: Advances in Science-Based Processing of Superalloys for Cost and Sustainment

    1. You have free access to this content
      Advances in Science-Based Processing of Superalloys for Cost and Sustainment (page 1)

    2. Numerical Simulation of Directional Solidification of Turbine Blade by LMC Process (pages 3–11)

      Ning Tang, Qingyan Xu and Liu Baicheng

    3. Nondestructive Evaluation of Microstructure in Super Alloy Disk Material (pages 13–21)

      James L. Blackshire, Enrique Medina and Jeong Na

  3. Part II: Battery Recycling

    1. You have free access to this content
      Battery Recycling (page 23)

    2. Role of Recycling in the Life Cycle of Batteries (pages 25–32)

      J.L. Sullivan, L. Gaines and A. Burnham

    3. A Preliminary Investigation for Spent LIBs Recycling (pages 33–39)

      Mengjun Chen, Fu-Shen Zhang and Jianxin Zhu

  4. Part III: Challenges in Mechanical Performances of Materials in Next Generation Nuclear Power Plants

    1. You have free access to this content
      Challenges in Mechanical Performances of Materials in Next Generation Nuclear Power Plants (page 41)

    2. Nitride-strengthened Reduced Activation Martensitic Steels (pages 43–50)

      Yi-yin Shan, Ping Hu, Wei Yan, Wei Wang, Wei Sha and Ke Yang

    3. Inclusion Initiated Cleavage Fracture in a Nitride-Strengthened Reduced Activation Martensitic Steel (pages 51–58)

      Wei Yan, Wei Wang, Ping Hu, Li-fen Deng, Yi-yin Shan and Ke Yang

  5. Part IV: Characterization of Nuclear Reactor Materials and Components with Neutron and Synchrotron Radiation

    1. You have free access to this content
      Characterization of Nuclear Reactor Materials and Components with Neutron and Synchrotron Radiation (page 59)

    2. Characterization of Radioactive Materials using the MARS Beamline at the Synchrotron SOLEIL (pages 61–68)

      Bruno Sitaud, Pier Lorenzo Solari, Sandrine Schlutig and Hervé Hermange

  6. Part V: Coatings for Structural, Biological, and Electronic Applications II

    1. You have free access to this content
      Coatings for Structural, Biological, and Electronic Applications II (page 69)

    2. Improving High Temperature Performance of Aluminum Foams by Nickel Coating (pages 71–76)

      Zhuokun Cao, Huan Liu, Yihan Liu and Guangchun Yao

    3. Studies on Ni-Ti Thin Films Deposited by Bias Assisted Magnetron Sputtering (pages 77–86)

      B. Geetha Priyadarshini, S. Aich and M. Chakraborty

    4. The Development of a Non-Destructive Multiple Partial Unloading Micro- Indentation Technique for Thermal Barrier Coating Spallation Prediction (pages 87–106)

      J. M. Tannenbaum, K. Lee, B. S.-J. Kang and M. A. Alvin

    5. Effect of the Duty Cycle on the Microstructural, Mechanical and Tribological Properties of TiN Layers Deposited by PACVD (pages 107–116)

      M. S. Mahdipoor, M. Montazeri, M. Soltanieh, F. Mahboubi, Sh. Ahangarani and M. H. Habibi

    6. The Influence of Pre-treatment Plasma Nitriding on Tribological Properties of TiN Coatings Produced by PACVD (pages 117–126)

      M. S. Mahdipoor, F. Mahboubi, M. Raoufi, H. Elmkhah and M. H. Habibi

    7. The Effects of Annealing and Si Content on the Charge-discharge Characteristics of Al-Si Thin Film with Pre-deposited Al Layer (pages 127–134)

      Chao-Han Wu, Fei-Yi Hung, Truan-Sheng Lui and Li-Hui Chen

    8. Effect of Gas Ambient on the Synthesis of Al and N Co-doped ZnO: (Al,N) Films and their Influence on PEC Response for Photoelectrochemical Water Splitting Application (pages 135–142)

      Sudhakar Shet, Le Chen, Houwen Tang, Todd Deutsch, Heli Wang, Nuggehalli Ravindra, Yanfa Yan, John Turner and Mowafak Al-Jassim

    9. NanoStructured Zinc Oxide Coatings Developed via Solution Precursor Plasma Spray Technique (pages 143–150)

      Raghavender Tummala, Ramesh K. Guduru and Pravansu S. Mohanty

    10. Spin Coated Er2O3-SiO2 Films on Silicon Substrates (pages 151–166)

      S. Abedrabbo, B. Lahlouh, A.T. Fiory and N.M. Ravindra

    11. Magnetic Material Interactions for the Method of Magnetic Field Directed Assembly (pages 167–173)

      Rene D. Rivero, Michael R. Booty, Anthony T. Fiory and N.M. Ravindra

    12. Flame Spray Deposition of Composite Titanium Alloy and Bioactive Glass Coatings (pages 175–182)

      Greg M. Nelson, André G. McDonald and John A. Nychka

    13. Influence of Substrate Temperature on the Photoelectrochemical Responses of Ga and N Co-doped ZnO Films (pages 183–190)

      Sudhakar Shet, Heli Wang, Nuggehalli Ravindra, Yanfa Yan, John Turner and Mowafak Al-Jassim

  7. Part VI: Electrometallurgy Fundamentals and Applications

    1. You have free access to this content
      Electrometallurgy Fundamentals and Applications (page 191)

    2. Preparation of TiFe Alloy by Electrolysis in Molten Salt (pages 193–201)

      Meilong Hu, Chenguang Bai, Jihong Du, Ruimeng Shi, Xuewei Lv and Xuyang Liu

    3. Recapturing Metals from Electrocoagulation Floc (pages 203–210)

      Jewel Andrew Gomes, Md Islam, Paul Bernazzani, George Irwin, Dan Rutman, David Cocke and Mohammad R. Islam

    4. Mechanism of Antimony Deposition in Alkaline Solution Containing Xylitol (pages 211–218)

      Wei Liu, Tianzu Yang and Qionghua Zhou

    5. Preparation of Ti-Al Intermetallic by Electrolytic Reduction from TiO2 and Al2O3 (pages 219–225)

      Chengbeng Yang, Du Jihong and Zhengping Xi

  8. Part VII: Hydrogen Storage in Materials: Theory and Experiment

    1. You have free access to this content
      Hydrogen Storage in Materials: Theory and Experiment (page 227)

    2. Mg-based Nanocomposites for Room Temperature Hydrogen Storage (pages 229–236)

      Mieczyslaw Jurczyk, Marek Nowak, Leslaw Smardz and Andrzej Szajek

    3. Production and Characterization of Supported Transition Metal Nanoparticles on Multi-Walled Carbon Nanotubes Functionalized by Gamma Irradiation and Chemical Process (pages 237–244)

      J. Rojas and C. H. Castano

  9. Part VIII: Hydrometallurgy Fundamentals and Applications

    1. You have free access to this content
      Hydrometallurgy Fundamentals and Applications (page 245)

    2. Enhanced Pressure Dissolution of Enargite Using Pyrite or Ferrous Sulfate (pages 247–254)

      M.C. Ruiz, O. Jerez, J. Retamal and R. Padilla

    3. Model and Simulation of Ion Exchange of Antimony (pages 255–265)

      Gerardo Cifuentes, Jaime Simpson, Cesar Zúñiga, Leoncio Briones and Alejandro Morales

    4. Analysis of the Adsorption of Gold and Silver on Magnetic Species Formed in the Electrocoagulation Process (pages 267–275)

      José R. Parga, Jesús L. Valenzuela and Victor Vazquez

    5. Treatment of Acid Mine Drainage by Electrodialysis (pages 277–284)

      Daniella Cardoso Buzzi, Lucas Stéphano Viegas, Flávia Paulucci Cianga Silvas, Marco Antônio Siqueira Rodrigues, Denise Crocce Romano Espinosa, Ivo André Homrich Schneider, Andréa Moura Bernardes and Jorge Alberto Soares Tenório

    6. Investigations on the Mechanism of Acid Leaching of Alkali-activated Ilmenite Concentrate and Titanium-rich Slag (pages 285–290)

      Xu Qian, Fu yajun, Sun Lin, Jin Jianfeng and Du jihong

    7. Kinetics Study of Alkaline Decomposition of Rubidium Jarosite in Ca(OH)2 Media (pages 291–298)

      Cerecedo S. Eduardo, Salinas R. Eleazar, C. Luis, G. Longoria, R. Francisco, P. Carrillo and Hernández A. Juan

    8. Leaching of Gold in Acid Thiourea-thiocyanate Solutions using Ferric Sulfate as Oxidant (pages 299–307)

      Xiyun Yang, Xichang Shi, Hui Xu, Michael S. Moats, Jan D. Miller, Xiang Xiao and Liwen Ma

    9. Modeling of Cobalt and Nickel Extraction by Solvent Extraction in Sulfate Media with D2EHPA in Isoparaffin (17/21) (pages 309–316)

      C. S. Sousa, M. Nascimento, I. O. C. Masson and O. G. C. Cunha

  10. Part IX: Magnetic Materials for Energy Applications

    1. You have free access to this content
      Magnetic Materials for Energy Applications (page 317)

    2. Magnetocaloric Study of Mechanically Alloyed LaFeSi (pages 319–324)

      M. Phejar, V. Paul-Boncour and L. Bessais

    3. Room Temperature Magneto-caloric Effect in Fe Substituted Ni-Mn-Sn Alloy (pages 325–330)

      Rahul Das, A. Perumal and A. Srinivasan

    4. Influence of Heat Treatment on the Structure and Magnetic Properties of Gd5Sn4 Alloy for Magnetic Refrigeration (pages 331–338)

      X. C. Zhong, H. Zhang, M. Zou, Z. W. Liu, D. C. Zeng, K.A. Gschneidner and V.K. Pecharsky

    5. Recent Advances in Non-oriented Electrical Steel for EV/HEV Traction Motor (pages 339–346)

      Ichiro Tanaka and Hiroyoshi Yashiki

    6. Effect of Different Annealing Methods on Structure and Texture of Primary Recrystallization of Grain-oriented Silicon Steel (pages 347–353)

      Li Li-juan, Liu Li-hua, Wu Xue-liang, Shi Wen and Zhai Qi-jie

    7. Fabrication of High Performance Fe-Si-Al Soft Magnetic Composites (pages 355–364)

      YOU Junhua, LI Qingda and QIU Keqiang

    8. Development of High Coercivity Nd-Fe-B Permanent Magnets (pages 365–373)

      M. Komuro, Y. Satsu, H. Suzuki, K. Ueda, A. Nambu, A. Sugawara and H. Matsuoka

    9. Effects of Cu Addition on Microstructures and Magnetic Properties of Nd- Fe(Co, Cu)-B Nanocomposite Magnets (pages 375–380)

      YOU Junhua, QIU Keqiang, REN Yinglei and LIAN Fazeng

    10. Hard Magnetic PrCo3 Structural and Magnetic Properties (pages 381–387)

      K Younsi, L Bessais, V Russier and J-C Crivello

    11. Magnetic Hardening of Nanocrystalline Sm-Fe-Mo Synthesized by Mechanical Alloying (pages 389–393)

      S. Khazzan, L. Bessais, N. Mliki and G. Van Tendeloo

    12. Industrial Requirements and Applications of Hard Magnetic Materials (pages 395–402)

      Jinfang Liu

    13. Magnetostrictive Behavior of Fe-W Alloy Single Crystals (pages 403–410)

      Gavin John Garside, Chai Ren, Biswadeep Saha, Meenakshisundaram Ramanathan and Sivaraman Guruswamy

    14. Investigation of DO3 and B2 Type Ordering in Quenched Magnetostrictive Fe- 27.5 at.%Ga Alloy Single Crystals (pages 411–418)

      Chai Ren, Gavin Garside, Biswadeep Saha, Meenakshisundaram Ramanathan and Sivaraman Guruswamy

    15. Influence of Plastic Deformation on the Magnetostrictive Behavior of [001]- oriented Fe-Ga Alloy Single Crystals (pages 419–426)

      Biswadeep Saha, Gavin Garside, Chai Ren, Meenakshisundaram Ramanathan and Sivaraman Guruswamy

  11. Part X: Materials in Clean Power Systems VI: Clean Coal-, Hydrogen Based-Technologies, and Fuel Cells

    1. You have free access to this content
      Materials in Clean Power Systems VI: Clean Coal-, Hydrogen Based-Technologies, and Fuel Cells (page 427)

    2. An Investigation on Hot Corrosion Resistance of Plasma Sprayed YSZ-Ceria TBC in Na2SO4+V2O5 at 1050°C (pages 429–437)

      M. Saremi and M. H. Habibi

    3. Development of A New Alloy for SOFC Interconnects (pages 439–446)

      Nobutaka Yasuda, Toshihiro Uehara, Shigenori Tanaka and Kazuhiro Yamamura

    4. Electrodeposited Metal Ni Coating on Ferritic Stainless Steel for Intermediate Temperature SOFC Interconnect Application (pages 447–455)

      Shujiang Geng and Fuhui Wang

    5. Investigationof 5 Mol% YSZ Electrolyte for SOFC (pages 457–464)

      Nilüfer Evcimen Duygulu and Ahmet Ekerim

    6. Electrodeposition of ZnO Nanocrystallines on ITO Mesoporous Films and Application to Photoelectrochemical Cells (pages 465–472)

      Haining Chen, Liqun Zhu, Weiping Li and Huicong Liu

    7. Optimization of the Concentrated V(IV)/V(V) Electrolytes in a Vanadium Redox Battery (pages 473–480)

      Feng Shi, Jinghua Zou, Huimin Lu and Yuan Yuan

  12. Part XI: Processing and Properties of Powder-Based Materials

    1. You have free access to this content
      Processing and Properties of Powder-Based Materials (page 481)

    2. Process Simulation of Cold Pressing and Sintering of Armstrong CP-Ti Powders (pages 483–490)

      Sarma B. Gorti, Adrian S. Sabau, William H. Peter, Stephen D. Nunn, Yukinori Yamamoto and Wei Chen

    3. Effect of Particle Size Particle Surface Modification Pressing Pressure and Sintering Temperature on Microstructure and Mechanical Properties P/M Al-B4C Composites (pages 491–498)

      Fatih Toptan, Isil Kerti, Sibel Daglilar, Ahmet Sagin and Taner Hacioglu

    4. Effect of HCl Concentration on ZrB2 Separation from a Self-propagating High-temperature Synthesis (SHS) Product (pages 499–504)

      Burcu Akkas, Murat Alkan, Bora Derin and Onuralp Yücel

    5. Characteristics of TiN/Fe Cermet Fabricated by Mechanical Milling and Pulse Current Sintering (pages 505–509)

      Hiroyuki Nakayama, Keizo Kobayshi and Kotaro Kikuchi

    6. Comparative Study of Production of Boron Carbide Powder by: Resistance Furnace and Arc Furnace (pages 511–521)

      H. Amini Rastabi and A. Karimi Dehcheshmeh

    7. Prediction and Control of Nucleation Kinetics of Mono-Sized Spherical Copper Droplets (pages 523–530)

      Mehmet Bora Islier and Teiichi Ando

    8. Microstructural Investigation of D2 Tool Steel during Rapid Solidification using Impulse Atomization (pages 531–538)

      P. Delshad Khatibi, A. Ilbagi and H. Henein

    9. Synthesis of Silver Plating Nano-copper Bimetallic Powders (pages 539–546)

      Wei Liu and Qionghua Zhou

    10. Effect of Heat Diffusion in Interparticle Micro-Welding for 3-D Particle Assembly (pages 547–552)

      Kenta Takagi, Kimihiro Ozaki and Keizo Kobayashi

    11. Characterization of Al-Ni Composites Produced by Ultrasonic Powder Consolidation (pages 553–559)

      Dinc Erdeniz and Teiichi Ando

    12. Comparison of the Effect of Particle Size on the Compressive Strength of Sintered Wollastonite - and Chemically Bonded Phosphate-Ceramics (pages 561–568)

      H. A. Colorado, J. Juanri, C. Hiel, H. T. Hahn and J. M. Yang

    13. Laser Cladding of Functional Coatings for Biomedicai Applications (pages 569–576)

      Shaodong Wang and Lijue Xue

    14. Investigation of Mechanical Alloying Process Parameters on Fe-Mn-Si Based System (pages 577–583)

      A. Umut Söyler, Burak Özkal and Leandru G. Bujoreanu

    15. Investigation of Solid State Reaction Mechanism for Sodium Metaborate (NaBO2) Production (pages 585–589)

      Aysel Kantürk Figen, Hatice Ergüven and Sabriye Pişkin

  13. Part XII: Properties, Processing, and Performance of Steels and Ni-Based Alloys for Advanced Steam Conditions

    1. You have free access to this content
      Properties, Processing, and Performance of Steels and Ni-Based Alloys for Advanced Steam Conditions (page 591)

    2. A Study on Constitutive Model for Alloy IC10 (pages 593–601)

      Hongjian Zhang, Weidong Wen and Haitao Cui

    3. High-Temperature Oxidation Behaviour of Co-Re-Cr-based Alloys (pages 605–612)

      B. Gorr, S. Burk and H.-J. Christ

  14. Part XIII: Refractory Metals 2011

    1. You have free access to this content
      Refractory Metals 2011 (page 603)

    2. Characterization of Osmium-Ruthenium Thin Films for Cathode Coatings (pages 613–617)

      P. Swartzentruber, T.J. Balk and S. Roberts

    3. WC(100) Surface and Co/WC(100) Interface: Spin-Polarized AB Initio Study (pages 619–626)

      Victor Zavodinsky

    4. Oxidation Performance of Mo-Si-B Alloys: Implications through Alloying and Pre-Treatment (pages 627–634)

      S. Burk, B. Gorr and H.-J. Christ

    5. Microwave Sintering of Nb/Nb5Si3 Composite Material (pages 635–642)

      Yi Liu, Huimin Lu and Jingru Dai

  15. Part XIV: Silicon Production, Purification and Recycling for Photovoltaic Cells

    1. You have free access to this content
      Silicon Production, Purification and Recycling for Photovoltaic Cells (page 643)

    2. Polysilicon in Photovoltaics: Market Conditions & Competing PV Technologies (pages 645–651)

      Byron Cocilovo, Mario Marquez, Akram Amooali, Andrew Shroads, Scott De Valle, Rochellee Manygoats, Chad Munich and David Lynch

    3. Preparation of Polysilicon by the Reaction of Zinc and Silicon Tetra-chloride (pages 653–659)

      Tao Zhang, Huimin Lu and Jinbo Xu

    4. Macrosegregation of Impurities during Solidification of Metallurgical Grade Silicon in a Vertical Bridgman Furnace (pages 661–668)

      Marcelo A. Martorano, João B. Ferreira Neto, Theógenes S. Oliveira and Tomoe Tsubaki

    5. Removal of Inclusions from Solar Grade Silicon Using Electromagnetic Field (pages 669–676)

      Anping Dong, Lucas N. W. Damoah, Hui Zhu, Lifeng Zhang and Chenlei Wang

    6. Effect of Solidification Conditions on Si Growth from Si-Cu Melts (pages 677–684)

      Yosuke Ohshima, Takeshi Yoshikawa and Kazuki Morita

    7. Review of Developments in Production of Silicon for Photovoltaics (pages 685–692)

      David Lynch, Wade Ben, Xiaoyang Ji, Feng Jiang, Alex Salce, Evan Morey and Yubo Jiao

    8. Preparation of High Purity Silicon by Electrolysis-Vacuum Distillation (pages 693–700)

      , Jidong Li, Mingjie Zhang and Yaowu Wang

    9. The Rate of Boron Elimination from Molten Silicon by Slag and Cl2 gas Treatment (pages 701–708)

      Hiroshi Nishimoto and Kazuki Morita

    10. Silicon Surface Texturing by Electro-Deoxidation of a Thin Silica Layer in Molten Salt (pages 709–716)

      Eimutis Juzeliūnas, Anthony Cox and Derek J. Fray

    11. Solid Oxide Membrane Process for Solar Grade Silicon Production Directly from Silicon Dioxide (pages 717–721)

      Alexander Roan, Soobhankar Pati, Soumendra N Basu and Uday B Pal

    12. Silicon Electrodeposition Process in Molten Fluorides (pages 723–732)

      Anne-Laure Bieber, Laurent Massot, Mathieu Gibilaro, Laurent Cassayre, Pierre Chamelot and Pierre Taxil

  16. Part XV: Ultrasonic Welding for Lightweight Components

    1. You have free access to this content
      Ultrasonic Welding for Lightweight Components (page 733)

    2. Mechanisms of Joint Formation in Ultrasonic Spot Welding Aluminium Automotive Sheet (pages 735–742)

      D. Bakavos, Y-C Chen and P. B. Prangnell

    3. Ultrasonic Welding of Hybrid Aluminum/CFRP-Joints: Microstructure, Monotonic Properties and Fatigue Behavior (pages 743–748)

      Stefan Huxhold, Frank Balle, Guntram Wagner and Dietmar Eifler

    1. You have free access to this content
      Author Index (pages 749–752)

    1. You have free access to this content
      Subject Index (pages 753–756)

SEARCH