Supplemental Proceedings: Materials Fabrication, Properties, Characterization, and Modeling, Volume 2

Copyright © 2011 The Minerals, Metals & Materials Society. All rights reserved.

Supplemental Proceedings: Materials Fabrication, Properties, Characterization, and Modeling, Volume 2

Author(s):

Published Online: 19 APR 2011 09:53AM EST

Print ISBN: 9781118029466

Online ISBN: 9781118062142

DOI: 10.1002/9781118062142

About this Book

Product Information

About The Product

Presents the most up-to-date information on the state of Materials Fabrication, Properties, Characterization, and Modeling. It's a great mix of practical applied technology and hard science, which is of invaluable benefit to the global industry.

Table of contents

    1. You have free access to this content
      Front Matter (pages i–xxi)

  2. Part I: 2011 Functional and Structural Nanomaterials: Fabrication, Properties, Applications and Implications

    1. You have free access to this content
      2011 Functional and Structural Nanomaterials: Fabrication, Properties, Applications and Implications (page 1)

    2. Fabrication of Gold-Platinum Nanoalloy by High-Intensity Laser Irradiation of Solution (pages 3–8)

      Takahiro Nakamura, Yuliati Herbani and Shunichi Sato

    3. Crystallization Kinetics and Giant Magneto Impedance Behavior of FeCo Based Amorphous Wires (pages 9–16)

      R.K. Roy, P. Sarkar, S. Singh, A. K. Panda and A. Mitra

    4. Fe-Based Amorphous-Nanocrystalline Thermal Spray Coatings (pages 17–24)

      B. Movahedi and M.H. Enavati

    5. Enhanced Photocatalytic Activity of Modified TiO2 for Degradation of CH2O in Aqueous Suspension (pages 25–41)

      Haixia Tonga, Li Zhaoc, Dan Li and Xiongfei Zhang

    6. Preparation and Characterization of ZnS Thin Films Using Chemical Bath Deposition Method: Effects of Deposition Time and Thermal Treatment (pages 43–50)

      Way-Ming Hsieh, Kong-Wei Cheng and Shingjiang Jessie Lue

    7. Femtosecond Laser-Induced Synthesis of Colloidal AuAg Nanoalloys from Aqueous Mixture of Metallic Ions (pages 51–57)

      Yuliati Herbani, Takahiro Nakamura and Shunichi Sato

    8. Electrochemical Performances of Nanoporous Carbon Anode for Super Lithium Ion Capacitor (pages 59–66)

      Zhou Xiang yang, Lou Shi ju, Yang Juan, Li Changlin and Zhang Taikang

    9. Effect of Temperature Schedule on the Particle Size of NiFe2O4 Spinel Nanopowder During Solid-State Reactions (pages 67–74)

      Zhigang Zhang, Guangchun Yao, Yihan Liu and Jinjing Du

    10. Interfacial Properties of Cu-Nb Multilayers as a Function of Dislocation/Disconnection Content (pages 75–82)

      N. Abdolrahim, I.N. Mastorakos, H.M. Zbib and D. F. Bahr

    11. Long-Time Photoluminescence Kinetics in Quantum Dot Samples (pages 83–90)

      Karel Král and Miroslav Menšík

    12. Synthesis and Characterization of Mullite Coatings (pages 91–98)

      Kasturi Paithankar, Dipika Barbadikar, D. R. Peshwe and A. S. Gandhi

    13. Characterization of Hybrid Carbon-Nanotube Composite Interfaces as a Function of Length Scale (pages 99–107)

      Harry Malecki, Michael Duffy, Sam Markkula and Marc Zupan

    14. Synthesis and Characterization of Nanostructure Forsterite Bioceramic for Tissue Engineering Applications (pages 109–116)

      F. Tavangarian, R. Emadi and M.H. Enayati

    15. Investigation of Mechanical Properties of Silica/Epoxy Nano-Composites by Molecular Dynamics and Finite Element Modeling (pages 117–120)

      Bohayra Mortazavi, Said Ahzi, Julien Bardon, Abdelghani Laachachi and David Ruch

    16. Basal-Plane Stacking-Fault Energies of Mg: A First-Principles Study of Li- and Al-Alloying Effects (pages 121–128)

      Z.-H. Jin, J. Han, X.M. Su and Y.T. Zhu

    17. Development of AL-TiB2 Nanocomposite (pages 129–136)

      Z. Sadeghian, M. H. Enayati, B. Lotfi and P. Beiss

    18. Dry Sliding Wear and Corrosion Behavior of Ultrafine-grained HSLA Steel Processed using Multi Axial Forging (pages 137–145)

      A. K. Padap, G. P. Chaudhari and S. K. Nath

    19. Heterogenity of Microstructure Evolution in NiTi (50 at% Ni) Alloy Severely Deformed by High Pressure Torsion (pages 147–154)

      R. Singh, J. Fiebig, S. Ostendorp, H. Rösner, E.A. Prokofyev, R.Z. Valiev, S.V. Divinski and G. Wilde

  3. Part II: Aluminum Alloys: Fabrication, Characterization and Applications

    1. You have free access to this content
      Aluminum Alloys: Fabrication, Characterization and Applications (page 155)

    2. Hot Tensile Behaviour and Constitutive Analysis of Al-5,5Zn-l,2Mg/Zr Alloys (pages 157–165)

      P. Leo, E. Cerri and H.J. McQueen

    3. Production of Continuous Cast 3105 Coil-Stock for Thin Gauge Roller Shutters (pages 167–174)

      Dionysios Spathis and John Tsiros

    4. Preparation of Al-Li Alloys for Lithium-Air Secondary Battery by Solid Diffusion Method (pages 175–178)

      Tao Cheng, Zijian Lv, Xiujing Zhai, Mingjie Zhang and Ganfeng Tu

    5. Effects of Process Parameters on Rolled Precursor for Aluminum Foam Sandwich (pages 179–184)

      Binna Song, Guangchun Yao, Guoyin Zu, Lei Wang and Zhihao Guan

    6. Preparation of Aluminum Foam Using a Novel Gas-Generating Agent (pages 185–190)

      Deng-wei Huo, Xiang-yang Zhou, Tai-kang Zhang, Jing Qin, Jie Li and Huan Zhao

    7. High Temperature Dry Sliding Wear Behaviour of Al-Si/Graphite Composites Processed by Stir Casting (pages 191–198)

      G. Rajaram, S. Kumaran, T. Srinivasa Rao and M. Kamaraj

    8. Preparation and Characterization of Short Carbon Fiber Reinforced Aluminium Matrix Composites (pages 199–204)

      Pengfei Yan, Guangchun Yao, Jianchao Shi and Xiaolan Sun

    9. Impact of Ultrasonic Impact Treatment on a 5456 Aluminum Alloy Characterized through Micro-Specimen Testing and X-Ray Tomography (pages 205–212)

      Caroline Scheck, Christopher Cheng, Kim Tran and Marc Zupan

    10. Failure Loads and Deformation in 6061-T6 Aluminum Alloy Spot Welds (pages 213–220)

      R.S. Florea, K.N. Solanki, D.J. Bammann, J.B. Jordon and M.P. Castanier

    11. Modeling Performance of Protection Materials Aluminum 7020-T651 and RHA Steel (pages 221–228)

      John F. Chinella

    12. Comprehensive Thermo-Mechanical Validation of Extrusion Simulation Cycle for Al 1100 Using HyperXtrude (pages 229–236)

      AbdulAfoo Parkar, Clemence Bouvard, Stephen Horstemeyer, Esteban Marin, Paul Wang and Mark Horstemeyer

    13. Mechanical Properties and Casting Characteristics of the Secondary Aluminum Alloy AlSi9Cu3(Fe) (A226) (pages 237–244)

      P. Pucher, H. Böttcher, H. Kaufmann, H. Antrekowitsch and P.J. Uggowitzer

    14. Comparison of Different FEM Codes Approach for Extrusion Process Analysis (pages 245–252)

      Lorenzo Donati, Nooman Ben Khalifa, Luca Tomesani and A. Erman Tekkaya

    15. Numerical Prediction of Grain Shape Evolution during Extrusion of AA6082 Alloy (pages 253–261)

      Antonio Segatori, Lorenzo Donati and Luca Tomesani

    16. Analysis of Charge Weld Evolution for a Multi-Holes Extrusion Die (pages 263–271)

      Antonio Segatori, Barbara Reggiani, Lorenzo Donati and Luca Tomesani

    17. Simulation of the Deformation of a Flexible Combo Bag in a DC Aluminium Casting (pages 273–278)

      A. Kharicha, A. Ludwig and M. Wu

    18. Solidification Analysis of Al-Si Alloys Modified with Addition of Cu Using In-Situ Neutron Diffraction (pages 279–289)

      D. Sediako, W. Kasprzak, I. Swainson and O. Garlea

    19. Novel Grain Refiner for Al-Si Alloys (pages 291–297)

      M. Nowak and N. Hari Babu

    20. Application of Neutron Diffraction in Analysis of Residual Stress Profiles in the Cylinder Web Region of an as-Cast V6 Al Engine Block with Cast-In Fe Liners (pages 299–308)

      D. Sediako, F. D'Elia, A. Lombardi, A. Machin, C. Ravindran, C. Hubbard and R. Mackay

    21. Effects of Al–8B Grain Refiner on the Structure, Hardness and Tensile Properties of a New Developed Super High Strength Aluminum Alloy (pages 309–320)

      Mohammad Alipour, Masoud Emamy, Jafar Rasizadeh, Mostafa karamouz and Mortaza Azarbarmas

    22. Study of the Artificial Aging Kinetics of Different AA6013-T4 Heat Treatment Conditions (pages 321–328)

      Josef Berneder, Ramona Prillhofer, Josef Enser, Peter Schulz and Carsten Melzer

    23. Estimating Response to Hot Rolling of Al-Mn-Mg Alloys from Hot Torsion Testing (pages 329–337)

      H.J. McQueen

    24. Microstructural Characterization and Heat Treatments of Different Al-Zn-Mg/Zr Alloys (pages 339–345)

      P. Leo, E. Cerri and H.J. McQueen

  4. Part III: Commonality of Phenomena in Composite Materials II

    1. You have free access to this content
      Commonality of Phenomena in Composite Materials II (page 347)

    2. Thermo-Mechanical Behavior of HDPE/Sugarcane Bagasse Fiber/Organoclay Nanocomposites (pages 349–357)

      Anibal V. Abreu Castillo, Alejandra Soria Teran, Anne Chinellato, Maria de Fátima Resende Nascimento, Francisco Rolando Valenzuela Díaz and Esperidiana Augusta Barretos de Moura

    3. Machinable Aluminum Matrix Composite (pages 359–366)

      William Harrigan

    4. Stability and Lithium Adsorption Property of LiMn2O4-LiSbO3 Composite in Aqueous Medium (pages 367–373)

      Xi-Chang Shi, Li-Wen Ma, Bai-Zhen Chen, Hui Xu, Xi-Yun Yang and Kun Zhang

    5. Reinforced Metal/Polymer/Metal Sandwich Composites with Improved Properties (pages 375–384)

      Heinz Palkowski, Olga Sokolova and Adele Carradó

    6. Higher-Order Micromechanics and Effective Elastic Moduli of Particle Reinforced Composites (pages 385–390)

      Keiji Yanase and Jiann-Wen Ju

    7. Modelling Shear Fracture of Hybrid CFRP/Ti Laminates with Cohesive Elements; Effects of Geometry and Material Properties (pages 391–398)

      P. Naghipour, M. Bartsch, J. Hausmann and K Schulze

  5. Part IV: Computational Thermodynamics and Kinetics

    1. You have free access to this content
      Computational Thermodynamics and Kinetics (page 399)

    2. Phonon Thermodynamics of Binary Fe Alloys (pages 401–408)

      Matthew S. Lucas

    3. Phase-Field Simulation of Segregation to Stacking Fault (Suzuki Effect) in Co-Ni Based Superalloy (pages 409–416)

      Y. Koizumi, S. Suzuki, T. Otomo, S. Kurosu, Y.P. Li, H. Matsumoto and A. Chiba

    4. Phase-Field Simulations of Bainitic Phase Transformation in 100CR6 (pages 417–425)

      Wenwen Song, Ulrich Prahl, Wolfgang Bleck and Krishnendu Mukherjee

    5. Microstructure Evolution of [001] Orientation Single Crystal Nickel-Based Superalloy during Compression Creep (pages 427–434)

      Zhang Shu, Tian Sugui, Liang Fushui, Li Anan and Li Jingjing

    6. The Application of Thermodynamic Analysis in Preparing the Mn-Zn Ferrites Precursor (pages 435–439)

      Xue Ping, Yuan Yaohua, Zhao Peiyu and Chen Xiaofang

    7. Phase Equilibria of the La-Ni-Cu Ternary System at 673 K: Thermodynamic Modeling and Experimental Validation (pages 441–447)

      Xuehui An, Qian Li, Jieyu Zhang, Shuanglin Chen and Ying Yang

    8. Statistical Model of Precipitation Kinetics for Recycled Commercial Aluminum Alloys (pages 449–456)

      Zhenshan Liu, Volker Monles, Olaf Engler and Guenter Gottstein

    9. Thermodynamics Calculation of CuO-NH3+NH4Cl Solution System (pages 457–459)

      Weilian Zheng, Dan Li, Zhongliang Xiao, Qiyuan Chen and Haixia Tong

    10. Development of Accurate Models for the Microstructure and Properties of Molten Salts (pages 461–468)

      Aurelie Jacob, Patrick J. Masset and Angus Gray-Weale

    11. A Heat Management Model for Hardness Uniformity of Multi-Pass Laser Heat Treatment Using Direct Diode Laser (pages 469–476)

      Soundarapandian Santhanakrishnan and Radovan Kovacevic

    12. Thermomechanical Processing Design of Nanoprecipitate Strengthened Alloys Employing Genetic Algorithms (pages 477–484)

      Pedro E. J. Rivera-Diaz-del-Castillo, Maarten de Jong and Marcel H. F. Sluiter

  6. Part V: David Pope Honorary Symposium on Fundamentals of Deformation and Fracture of Advanced Metallic Materials

    1. You have free access to this content
      David Pope Honorary Symposium on Fundamentals of Deformation and Fracture of Advanced Metallic Materials (pages 485–488)

    2. Intelligent Microscopy for the Study of Fracture and Fatigue (pages 489–496)

      David Fullwood, Brent Adams, Travis Rampton and Ali Khosravani

    3. Influence of Hydrogen Loading on the Tensile Behavior of Fe-Ga Alloys (pages 497–504)

      Meenakshisundaram Ramanathan, Biswadeep Saha, Chai Ren, Gavin Garside and Sivaraman Guruswamy

    4. Truncated Dislocation Sources in Nanometric Aluminum Crystals: A Molecular Dynamics Study (pages 505–512)

      S.B. Biner and L.P. Kubin

    5. Geometrical Construction and Structure of Quasi-Periodic Grain Boundaries in Cubic Materials (pages 513–520)

      Mohammad Shamsuzzoha

    6. Influences of Material and Process Parameters on Delayed Fracture in TRIP-Aided Austenitic Stainless Steels (pages 521–528)

      Xiaofei Guo and Wolfgang Bleck

    7. Microstructure and Mechanical Properties of Dual Two-Phase Intermetallic Alloys Composed of Geometrically Close Packed Ni3Al and Ni3V Structures (pages 529–536)

      Takayuki Takasugi and Yasuyuki Kaneno

    8. Some Unusual Aspects of the Deformation Of FeAl and Fe2MnAl (pages 537–545)

      I. Baker

    9. Recent Progress in High Temperature TiAl Alloys (pages 547–555)

      G. L. Chen, L. L. Zhao, J. P. Lin and X.J. Xu

    10. Overview of Creep Deformation of Nickel Base Superalloys and Intermetallics (pages 557–565)

      Dilip Shah

    11. Localized Shear Deformation in Gum Metal at Ideal Strength (pages 567–574)

      S. Kuramoto, T. Furuta, N. Nagasako and J. W. Morris

  7. Part VI: Deformation, Damage, and Fracture of Light Metals and Alloys

    1. You have free access to this content
      Deformation, Damage, and Fracture of Light Metals and Alloys (page 575)

    2. The Effect of Crystallographic Orientation on Void Growth: A Molecular Dynamics Study (pages 577–584)

      M.A. Bhatia, K.N. Solanki, A. Moitra and M.A. Tschopp

    3. Room Temperature Creep and Substructure Formation in Pure Aluminum at Ultra-Low Strain Rates (pages 585–592)

      J.J. Shen, K. Ikeda, S. Hata and H. Nakashima

    4. Development of <111> Fiber Texture and {111} <112> Shear Bands in Pure Al Metal by Wire Drawing (pages 593–600)

      Mohammad Shamsuzzoha

    5. Damage Evolution in Ultrasonic Welded Aluminum/Fiber-Reinforced Polymer Joints with Different Welding Geometries (pages 601–608)

      Natalia Konchakova, Ralf Mueller, Franz Josef Barth, Frank Balle and Dietmar Eifler

    6. Role of Austenite Plasticity in the Deformation of Superelastic Nitinol (pages 609–616)

      David Xu and Robert O. Ritchie

    7. Vanadium Effects on a BCC Iron Σ 3 (111) [1-10] Grain Boundary Strength (pages 617–619)

      Sungho Kim, Seong-Gon Kim and Mark F. Horstemeyer

    8. Fracture Behavior of Short Carbon Fiber Reinforced Aluminium Matrix Composite (pages 621–625)

      Pengfei Yan, Guangchun Yao, Jianchao Shi and Xiaolan Sun

    9. Stress Intensity Factor Solutions for Friction Stir Spot Welds of Magnesium AZ31 Alloy (pages 627–632)

      Tian Tang, Mark F. Horstemeyer, Brian Jordan and Paul Wang

    10. Deformation Induced Phase Transformation during Machining of Ti-5553 (pages 633–640)

      David P. Yan, Guy Littlefair and Tim Pasang

  8. Part VII: Fatigue and Corrosion Damage in Metallic Materials: Fundamentals, Modeling and Prevention

    1. You have free access to this content
      Fatigue and Corrosion Damage in Metallic Materials: Fundamentals, Modeling and Prevention (page 641)

    2. Effect of Proximity and Dimension of Two Artificial Pitting Holes on the Fatigue Endurance of Aluminum Alloy 6061-T6 under Rotating Bending Fatigue Tests (pages 643–650)

      G.M. Domínguez Almaraz, V.H. Mercado Lemus and J.J. Villalón López

    3. Research on HCF Tests and Damage Model of TC11 Alloy Welded Joints (pages 651–658)

      Liu Xiao-gang and Guo Hai-ding

    4. Fatigue Behavior of Al 6082-T4 and Al 7075-T73 after Ball Burnishing (pages 659–666)

      Yasser Fouad, Mansour Mhaede and Lothar Wagner

    5. A Modified LEFM Approach for the Prediction of the Notch Effect in Fatigue (pages 667–674)

      Masahiro Endo, Keiji Yanase, Satoshi Ikeda and Arthur J. McEvily

    6. Resistivity Based Evaluation of the Fatigue Behaviour of Cast Irons (pages 675–682)

      Holger Germann, Peter Starke and Dietmar Eifler

    7. Microstructure-Sensitive Probabilistic Fatigue Modeling of Notched Components (pages 683–690)

      William D. Musinski and David L. McDowell

    8. Electrochemical Evaluation of Martensitic-Austenitic Stainless Steel in Sulfuric Acid Solutions (pages 691–698)

      M.M. Sadawy

    9. Effect of Temperature on the Loss of Ductility of S-135 Grade Drill Pipe Steel and Characterization of Corrosion Products in CO2 Containing Environment (pages 699–706)

      Arshad Bajvani Gavanluei, Brajendra Mishra and David L. Olson

    10. Corrosion Behavior and Galvanic Corrosion Studies of Ti-6Al-4V Alloy GTA Weldment in HC1 Solution (pages 707–714)

      M. Atapour, E. Mohammadi Zahrani, M. Shamanian and M. H. Fathi

    11. Comparative Study of Hot Corrosion Behavior of Plasma Sprayed Yittria and Ceria Stabilized Zirconia Thermal Barrier Coatings in Na2SO4+V2O5 at 1050°C (pages 715–723)

      M. S. Mahdipoor, M. R. Rahimipour and M. H. Habibi

    12. The Effect of Temperature on the Corrosion Behavior of 625 Superalloy in PbSO4-Pb3O5-PbCl-ZnO Molten Salt System with 10 wt. % CdO (pages 725–734)

      E. Mohammadi Zahrani and A. M. Alfantazi

  9. Part VIII: Frontiers in Solidification Science

    1. You have free access to this content
      Frontiers in Solidification Science (page 735)

    2. Nucleation Catalysis Potency of Ceramic Nanoparticles in Aluminum Matrix Nanocomposites (pages 737–744)

      Michael P. De Cicco, John H. Perepezko, Lih-Sheng Turng and Xiaochun Li

    3. The Microstructure and Mechanical Properties of Direct-Quenched and Tempered AISI 4140 Steel (pages 745–753)

      A.H. Meysami, R. Ghasemzadeh, H. Seyedyn, M.R. Aboutalebi and R. Rezaei

    4. A Numerical Benchmark on the Prediction of Macrosegregation in Binary Alloys (pages 755–762)

      H. Combeau, M. Bellet, Y. Fautrelle, D. Gobin, E. Arquis, O. Budenkova, B. Dussoubs, Y. Duterrail, A. Kumar, S. Mosbah, T. Quatravaux, M. Rady, C.-A. Gandin, B. Goyeau and M. Založnik

  10. Part IX: ICME: Overcoming Barriers and Streamlining the Transition of Advanced Technologies to Engineering Practice - The 12th MPMD Global Innovations Symposium

    1. You have free access to this content
      ICME: Overcoming Barriers and Streamlining the Transition of Advanced Technologies to Engineering Practice - The 12th MPMD Global Innovations Symposium (page 763)

    2. Modeling and Simulation of Mechanical Properties of Magnesium Alloy Wheel Casting for Automobile (pages 765–770)

      Liang Huo, Zhiqiang Han, Baicheng Liu, Xunming Zhu, Junpeng Duan and Aimin Wang

    3. Assessing Data Completeness and Predictive Potential in Magnesium Alloy Databases (pages 771–778)

      Dumont M. Jones and Kim F. Ferris

  11. Part X: Massively Parallel Simulations of Materials Response

    1. You have free access to this content
      Massively Parallel Simulations of Materials Response (page 779)

    2. LIGGGHTS – Open Source Discrete Element Simulations of Granular Materials Based on Lammps (pages 781–788)

      Christoph Kloss and Christoph Goniva

    3. Atomic Scale Deformation Mechanisms of Amorphous Polyethylene under Tensile Loading (pages 789–794)

      M.A. Tschopp, J.L. Bouvard, D.K. Ward and M.F. Horstemeyer

  12. Part XI: Recent Developments in the Processing, Characterization, Properties and Performance of Metal Matrix Composites

    1. You have free access to this content
      Recent Developments in the Processing, Characterization, Properties and Performance of Metal Matrix Composites (page 795)

    2. Low Density Magnesium Matrix Syntactic Foams (pages 797–804)

      John D. DeFouw and Pradeep K. Rohatgi

    3. Joining of Advanced Aluminum-Graphite Composite (pages 805–812)

      N. P. Hung, M. Velamati, E. Aguilar, M. A. Garza-Castañon and M. Powers

    4. Effect of Al+B4C Agglomerate Size on Mechanical Properties of Trimodal Aluminum Metal Matrix Composites (pages 813–820)

      Bo Yao, Travis Patterson, Yongho Sohn, Matthew Shaeffer, Cory Smith, Mark van den Bergh and Kyu Cho

    5. Effects of SPS Parameters on the Mechanical Properties and Microstructures of Titanium Reinforced with Multi-Wall Carbon Nanotubes Produced by Hot Extrusion (pages 821–828)

      Thotsaphon Threrujirapapong, Takahiro Mimoto, Katsuyoshi Kondoh, Junko Umeda and Bunshi Fugetsu

    6. Microstructural Development of Al–15wt.%Mg2Si In Situ Composite with Be Addition (pages 829–836)

      Mortaza Azarbarmas, Masoud Emamy, Jafar Rassizadehghani, Mohammad Alipour and Mostafa karamouz

    7. Microstructural Properties and Wear Behaviour of AlSi9Mg Matrix B4Cp Reinforced Composites (pages 837–842)

      Fatih Toptan, Işil Kerti, Ahmet Sagin, Mustafa Cigdem, Sibel Daglilar and Fatih Yuksel

    8. Modification of Al–Mg2Si In Situ Composite by Boron (pages 843–850)

      Mortaza Azarbarmas, Masoud Emamy, Jafar Rassizadehghani, Mohammad Alipour and Mostafa karamouz

    9. In-Situ Synthesis of AIN/Mg Matrix Composites (pages 851–857)

      Xiao Ma, Salin Kuplin, David R. Johnson and Kevin P. Trumble

    10. Performance Evaluation of Particulate Reinforced Al-SiC Bolted Joints (pages 859–866)

      Gergis William, Samir Shoukry and Jacky Prucz

    11. Effect of MgAl2O4 on the Superficial Hardness of Hybrid-Multimodal Al/SiC Composites Processed by Reactive Infiltration (pages 867–872)

      M. Montoya-Dávila, M. I. Pech-Canul, M. A. Pech-Canul and R. Escalera-Lozano

    12. Corrosion and Wear Behaviour of Aluminum Alloy 6061-Fly Ash Composites (pages 873–881)

      Ajit Bhandakkar, B. Balaji, R. C. Prasad and Shankar Sastry

    13. Interface Evolution in Tungsten Wire Reinforced Stainless Steel Composites (pages 883–893)

      Pawan Kumar and Milo V. Kral

    14. Effects of Annealing on the Growth Behavior of Intermetallic Compounds on the Interface of Copper/Aluminum Clad Metal Sheets (pages 895–901)

      Xiaobing Li, Guoyin Zu and Qiang Deng

  13. Part XII: Surfaces and Heterostructures at Nano- or Micro-Scale and Their Characterization, Properties, and Applications

    1. You have free access to this content
      Surfaces and Heterostructures at Nano- or Micro-Scale and Their Characterization, Properties, and Applications (page 903)

    2. Application of the Strong Contrast Technique to Thermoelastic Characterization of Nanocomposites (pages 905–910)

      Majid Baniassadi, Akbar Ghazavizadeh, David Ruch, Yves Rémond, Said Ahzi and Hamid Garmestani

    3. Colloid-Chemical Nanoprocesses and Nanotechnologies on the Basis of Oxyhydrate Systems of Rare-Earth Elements (pages 911–918)

      Tatiana Prolubnikova, Yuri Sucharev, Konstantin Nosov and Tatiana Ukolkina

  14. Part XIII: Thermally Activated Processes in Plastic Deformation

    1. You have free access to this content
      Thermally Activated Processes in Plastic Deformation (page 919)

    2. Comparative Hot-Work Constitutive Analyses Of Carbon/HSLA and Stainless Steels with Linkage to Microstructural Evolution (pages 921–929)

      H.J. McQueen, Yong Li, I. Rieiro, M. Carsi and O.A. Ruano

    3. Experimental Measurements of the Shear-Coupled Stress Driven Grain Boundary Migration in Al Bicrystals (pages 931–938)

      Dmitri A. Molodov, Tatiana Gorkaya and Günter Gottstein

  15. Part XIV: Addendum

    1. You have free access to this content
      Addendum (page 939)

    2. Experimental Study on Reduction Roasting and Separation of Nickeliferous Latente by Microwave Heating (pages 941–951)

      Yi Ling-yun, Huang Zhu-cheng, Hu Bing, Wang Xia and Jiang Tao

    1. You have free access to this content
      Author Index (pages 953–957)

    1. You have free access to this content
      Subject Index (pages 959–963)

SEARCH