Advanced Ceramic Coatings and Materials for Extreme Environments: Ceramic Engineering and Science Proceedings, Volume 32

Copyright © 2011 The American Ceramic Society. All rights reserved.

Advanced Ceramic Coatings and Materials for Extreme Environments: Ceramic Engineering and Science Proceedings, Volume 32

Editor(s): Dongming Zhu, Hua-Tay Lin, Yanchun Zhou, Sujanto Widjaja, Dileep Singh

Published Online: 15 NOV 2011 03:14PM EST

Print ISBN: 9781118059883

Online ISBN: 9781118095232

DOI: 10.1002/9781118095232

About this Book

Product Information

About The Product

This book is a collection of papers from The American Ceramic Society's 35th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 23-28, 2011. This issue includes papers presented in the Advanced Ceramic Coatings for Structural, Environmental, and Functional Applications and Materials for Extreme Environments symposia on topics such as Coatings to Resist Wear, Erosion and Tribological Loadings; Environmental Barrier Coatings; Functionally Graded Coatings and Interfaces; Thermal Barrier Coatings; and Ultrahigh Temperature Ceramics and Nanolaminated Ternary Carbides and Nitrides (MAX Phases).

Table of contents

    1. You have free access to this content
      Front Matter (pages i–xiii)

  2. Part I: Advanced Coating Charcterization Methodsand Non-Destructive Evaluation

    1. Monitoring Delamination of Thermal Barrier Coatings During Interrupted High-Heat-Flux Laser Testing using Upconversion Luminescence Imaging (pages 1–13)

      Jeffrey I. Eldridge, Dongming Zhu and Douglas E. Wolfe

    2. Thermal Imaging Measurement Accuracy for Thermal Properties of Thermal Barrier Coatings (pages 15–22)

      J. G. Sun

  3. Part II: Advanced Coating Processing and Nanostructured Coating Systems

    1. High Velocity Suspension Flame Sprayed (HVSFS) Hydroxyapatite Coatings for Biomedical Applications (pages 23–35)

      N. Stiegler, R. Gadow and A. Killinger

  4. Part III: Coatings to Resist wear, Erosion, and Tribological Loadings

    1. Ceramic/Metal - Polymer Multilayered Coatings for Tribological Applications under Dry Sliding Conditions (pages 37–50)

      A. Rempp, M. Widmann, P. Guth, A. Killinger and R. Gadow

  5. Part III: Coatings to Resist Wear, Erosion, and Tribological Loadings

    1. Application of HVOF for High Performance Cylinder Liner Coatings (pages 51–58)

      A. Manzat, A. Killinger and R. Gadow

    2. Multilayer Coatings for Anti-Corrosion Applications (pages 59–70)

      L. Lin, C. Qu, R. Kasica, Q. Fang, R. E. Miller, E. Pierce, E. McCarty, J. H. Fan, D. D. Edwards, G. Wynick and X. W. Wang

  6. Part IV: Environmental Barrier Coatings for Turbine Engines and Extreme Environments

    1. Plasma Spray-Physical Vapor Deposition (PS-PVD) of Ceramics for Protective Coatings (pages 71–84)

      B. J. Harder and D. Zhu

    2. An Yb2Si2O7 Oxidation Resistance Coating for C/C Composites by Supersonic Plasma Spray (pages 85–90)

      Lingjun Guo, Minna Han, Hejun Li, Kezhi Li and Qiangang Fu

  7. Part V: Functionally Graded Coatings and Interfaces

    1. Development of Oxide Ceramic APS Coatings for Microwave Absorption (pages 91–105)

      M. Floristán, P. Müller, A. Gebhardt, A. Killinger, R. Gadow, A. Cardella and C. Li

  8. Part VI: Thermal Barrier Coatings

    1. Hot Corrosion of Potential Thermal Barrier Coating Material (SM1-XYBX)2ZR2O7 by V2O5 and NA2SO4 (pages 107–128)

      Jia-Hu Ouyang, Sa Li, Zhan-Guo Liu and Yu Zhou

    2. Variation of Creep Properties and Interfacial Roughness in Thermal Barrier Coating Systems (pages 129–136)

      P. Seiler, M. Bäker and J. Rösler

  9. Part VII: Materials for Extreme Environments: Ultra High Temperature Ceramics (UHTCS) and Nanolaminated Ternary Carbides and Nitrides (Max Phases)

    1. Temperature and Strain-Rate Dependent Plasticity of ZrB2 Composites from Hardness Measurements (pages 137–149)

      J. Wang, F. Giuliani and L.J. Vandeperre

  10. Part VII: Materials for Extreme Environments: Ultra High Temperature Ceramics (UHTCS) and Nanolaminated Ternary Carbides and Nitrides (MAX Phases)

    1. Nano-Crystalline Ultra High Temperature HfB2 and HfC Powders and Coatings using a Sol-Gel Approach (pages 151–159)

      S. Venugopal, A. Paul, B. Vaidhyanathan, J. Binner, A. Heaton and P. Brown

    2. Pressureless Sintering and Hot-Pressing of Ti2AlN Powders Obtained by SHS Process (pages 161–168)

      L. Chlubny, J. Lis, M.M. Bućko and D. Kata

    3. Diffraction Study of Self-Recovery in Decomposed Al2TiO5 During Vacuum Annealing (pages 169–175)

      I.M. Low and W.K. Pang

    4. Kinetics of Phase Decomposition in Ti4AlN3 and Ti2AlN - a Comparative Diffraction Study (pages 177–186)

      W.K. Pang, R.I. Smith, V.K. Peterson and I.M. Low

    1. You have free access to this content
      Author Index (pages 187–188)

SEARCH