Mechanical Properties and Performance of Engineering Ceramics and Composites VI: Ceramic Engineering and Science Proceedings, Volume 32

Copyright © 2011 The American Ceramic Society. All rights reserved.

Mechanical Properties and Performance of Engineering Ceramics and Composites VI: Ceramic Engineering and Science Proceedings, Volume 32

Editor(s): Dileep Singh, Jonathan Salem, Sujanto Widjaja

Published Online: 15 NOV 2011 03:42PM EST

Print ISBN: 9781118059876

Online ISBN: 9781118095355

DOI: 10.1002/9781118095355

About this Book

Product Information

About The Product

This book is a collection of papers from The American Ceramic Society's 35th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 23-28, 2011. This issue includes papers presented in the Mechanical Behavior and Performance of Ceramics & Composites Symposium on topics such as processing-microstructure properties correlations; fracture mechanics, modeling and testing; tribological properties; applications; and processing.

Table of contents

    1. You have free access to this content
      Front Matter (pages i–xiii)

  2. Part I: Composites: Fibers, Matrices, Interfaces, and Applications

    1. Oxide Fiber Coatings for Silicon Carbide Ceramic Matrix Composites (pages 1–14)

      Emmanuel E. Boakye, Pavel S. Mogilevsky, T. A. Parthasarathy, Randall S. Hay, Michael K. Cinibulk and M. Ahrens

    2. Transmission Electron Microscopy of Rare-Earth Orthophosphate Fiber-Matrix Interphases that Deform by Transformation Plasticity During Fiber Push-Out (pages 15–22)

      R. S. Hay, G. E. Fair, E. E. Boakye, P. Mogilevsky, T. A. Parthasarathy, M. Ahrens and T. J. Godar

    3. Processing of Oxide/Oxide Composites for Gas Turbine Applications Based on Braiding Technique (OXITEX™) (pages 23–36)

      Christian Wilhelmi, Thays Machry, Ralf Knoche and Dietmar Koch

  3. Part II: Environmental Effects of Ceramics and Composites

    1. Relationships Between Fiber Strength, Passive Oxidation and Scale Crystallization Kinetics of Hi-Nicalon™-S SiC Fibers (pages 37–51)

      R. S. Hay, G. E. Fair, R. Bouffioux, E. Urban, J. Morrow, A. Hart and M. Wilson

  4. Part III: Fracture Mechanics, Modeling, and Mechanical Testing

    1. Specimen Stress Equilibrium in Split Hopkinson Pressure Bar Tests of Ceramics at High Strain Rate (pages 53–66)

      Jianming Yuan, Jan Ma and Geoffrey E.B. Tan

    2. Residual Stress in Ceramic Zirconia-Porcelain Crowns by Nanoindentation (pages 67–76)

      Y. Zhang and J. C. Hanan

    3. Design and Development Approach for Gas Turbine Combustion Chambers Made of Oxide Ceramic Matrix Composites (pages 77–87)

      Ralf Knoche, Erich Werth, Markus Weth, Jesus Gómez García, Christian Wilhelmi and Miklós Gerendás

    4. Effects of Preloading on Foreign Object Damage in an N720/Alumina Oxide/Oxide Ceramic Matrix Composite (pages 89–100)

      D. Calvin Faucett and Sung R. Choi

    5. Frequency and Hold-Time Effects on Durability of Melt-Infiltrated SiC/SiC (pages 101–109)

      G. Ojard, Y. Gowayed, G. Morscher, U. Santhosh, J. Ahmad, R. Miller and R. John

    6. Mechanical and Microstructural Characterization of Reaction Bonded Silicon Carbide Processed with Petroleum Coke (pages 111–119)

      Rodrigo P. Silva and Celio A. Costa

  5. Part IV: Nondestructive Evaluation

    1. Identification of Damage Modes in Ceramic Matrix Composites by Acoustic Emission Signal Pattern Recognition (pages 121–133)

      N. Godin, M. R'Mili, P. Reynaud, G. Fantozzi and J. Lamon

    2. An Indentation Based Non-Destructive Evaluation Technique for Thermal Barrier Coating Spallation Prediction (pages 135–150)

      J. M. Tannenbaum, K. Lee, B. S.-J. Kang and M. A. Alvin

    3. Determination of Apparent Porosity Level of Refractory Concrete Using Ultrasonic Pulse Velocity Technique and Image Analysis (pages 151–161)

      Anja Terzić, Ljubica Pavlović and Vojislav Mitić

  6. Part V: Processing-Microstructure-Properties Correlations

    1. Sintering Behavior of Lithium-Titanate Pebbles: Modifications of Microstructure and Pore Morphology (pages 163–170)

      D. Mandal, D. Sen, S. Mazumder, M R K Shenoi, S. Ramnathan and D. Sathiyamoorthy

    2. Silicon Carbide Based Sandwich Structures: Processing and Properties (pages 171–179)

      Alberto Ortona, Claudio D'Angelo, Simone Pusterla, Sandro Gianella and Erbicol SA

    3. Chemically Bonded Phosphate Ceramics with Different Fiber Reinforcements (pages 181–188)

      H. A. Colorado, C. Hiel and H. T. Hahn

    4. Preceramic-Polymer-Bonded SiC Preforms for High Volume Fraction SiCp/Al Composites (pages 189–200)

      Kuljira Sujirote, Kannigar Dateraksa, Sukunthakan Ngernbamrunga, Ryan McCuistonb, Trinmet Sungkapanc and Jessada Wannasinc

    5. Novel High Temperature Wound Oxide Ceramic Matrix Composites Manufactured via Freeze Gelation (pages 201–212)

      Thays Machry, Christian Wilhelmi and Dietmar Koch

    6. Effect of Reaction Time on Composition and Properties of SiC-Diamond Ceramic Composites (pages 213–221)

      S. Salamone and O. Spriggs

    7. Pressureless Sintering of Boron Carbide Using Amorphous Boron and SiC as Additives (pages 223–227)

      Célio A. Costa, Victor Manuel Domingues, José Brant de Campos and Pedro Augusto de S.L. Cosentino

    8. Effect of Reactive Heat Treatment on Properties of Al-Mg-B4C Composites (pages 229–235)

      M. K. Aghajanian, A. L. McCormick and W. M. Waggoner

    9. Cohesive Strength of Dry Powders Using Rheology (pages 237–243)

      Nicholas Ku, Sara Reynaud, Rich Haber and Chuck Rohn

    10. Effect of Heat Treatment on Thermal Properties of Pitch-Based Carbon Fiber and Pan-Based Carbon Fiber Carbon-Carbon Composites (pages 245–254)

      Sardar S. Iqbal, Ralph Dinwiddie, Wallace Porter, Michael Lance and Peter Filip

  7. Part VI: Tribological Properties of Ceramics and Composites

    1. Ceramic Foam/Aluminium Alloy Interpenetrating Composites for Wear Resistance Applications (pages 255–269)

      J. Liu, J. Binner, R. Higginson and C. Munnings

    2. An Experimental Study on the Effects of SiC on the Sintering and Mechanical Properties of Cr3C2-NiCR Cermets (pages 271–279)

      Ali Ozer, Waltraud M. Kriven and Yahya Kemal Tur

    3. Increasing the Operating Pressure of Gasoline Injection Pumps via Ceramic Sliding Systems (pages 281–295)

      C. Pfister, H. Kubach and U. Spicher

    4. Property and Microstructural Correlations to Wear on Reaction Bonded Materials (pages 297–304)

      A.L. Marshall and S. Salamone

    1. You have free access to this content
      Author Index (pages 305–306)

SEARCH