Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials V: Ceramic Engineering and Science Proceedings, Volume 32

Copyright © 2011 The American Ceramic Society. All rights reserved.

Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials V: Ceramic Engineering and Science Proceedings, Volume 32

Editor(s): Tatsuki Ohji, Mrityunjay Singh, Sujanto Widjaja, Dileep Singh

Published Online: 15 NOV 2011 03:24PM EST

Print ISBN: 9781118059937

Online ISBN: 9781118095379

DOI: 10.1002/9781118095379

About this Book

Product Information

About The Product

This book is a collection of papers from The American Ceramic Society's 35th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 23-28, 2011. This issue includes papers presented in the 5th International Symposium on Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials and Systems on topics such as Design-Oriented Manufacturing and Novel Forming and Sintering. Papers from a special session held in honor of Katsutoshi Komeya of Yokohama National University, Japan are also included.

Table of contents

    1. You have free access to this content
      Front Matter (pages i–xiii)

    2. Seeds Innovation and Bearing Applications of Silicon Nitride Ceramics (pages 1–15)

      Katsutoshi Komeya

    3. Comparison of Microwave and Conventionally Sintered Yttria Doped Zirconia Ceramics and Hydroxyapatite-Zirconia Nanocomposites (pages 17–26)

      Mark R. Towler, Stuart Hampshire, Colin J. Reidy, Declan J. Curran and Thomas J. Fleming

    4. Recent Developments in High Thermal Conductivity Silicon Nitride Ceramics (pages 27–33)

      You Zhou, Kiyoshi Hirao, Hideki Hyuga and Dai Kusano

    5. Microstructure Maps for Unidirectional Freezing of Particle Suspensions (pages 35–44)

      Rainer Oberacker, Thomas Waschkies and Michael J. Hoffmann

    6. Interactions of Si3N4-Based Ceramics in Water Environment under Sub-Critical Conditions (pages 45–57)

      Pavol Šajgalík, Dagmar Galusková, Miroslav Hnatko and Dušan Galusek

    7. Smart Recycling of Composite Materials (pages 59–65)

      Makio Naito, Hiroya Abe, Akira Kondo, Masashi Miura, Norifumi Isu and Takahiro Ohmura

    8. High Thermal Conductivity and High Strength Sintered Reaction - Bonded Silicon Nitride Ceramics Fabricated by using Low Grade Si Powder (pages 67–76)

      Dai Kusano, Shigeru Adachi, Gen Tanabe, Hideki Hyuga, You Zhou and Kiyoshi Hirao

    9. Electrical Conductive CNT-Dispersed Si3N4 Ceramics with Double Percolation Structure (pages 77–82)

      Sara Yoshio, Junichi Tatami, Toru Wakihara, Tomohiro Yamakawa, Katsutoshi Komeya and Takeshi Meguro

    10. Fabrication of CNT-Dispersed Si3N4 Ceramics by Mechanical Dry Mixing Technique (pages 83–88)

      Atsushi Hashimoto, Sara Yoshio, Junichi Tatami, Hiromi Nakano, Toru Wakihara, Katsutoshi Komeya and Takeshi Meguro

    11. Joining of Silicon Nitride Long Pipe by Local Heating (pages 89–92)

      Mikinori Hotta, Naoki Kondo and Hideki Kita

    12. Joining of Silicon Nitride with Pyrex® Glass by Microwave Local Heating (pages 93–96)

      Naoki Kondo, Hideki Hyuga, Mikinori Hotta, Hideki Kita and Kiyoshi Hirao

    13. Mechanical Properties of Chemical Bonded Phosphate Ceramics with Fly Ash as Filler (pages 97–107)

      H. A. Colorado, C. Daniel, C. Hiel, H. T. Hahn and J. M. Yang

    14. Ceramics Micro Processing of Photonic Crystals: Geometrical Patterning of Tiania Dispersed Polymer for Terahertz Wave Control (pages 109–119)

      Soshu Kirihara, Satoko Tasaki, Toshiki Niki and Noritoshi Ohta

    15. Intergranular Properties and Structural Fractal Analysis of BaTiO3-Ceramics Doped by Rare Earth Additives (pages 121–132)

      V. V. Mitic, V. Pavlovic, V. Paunovic, J. Purenovic, Lj. Kocic, S. Jankovic, I. Antolovic and D. Rancic

    16. Development of Numerical Method for Evaluating Microstructural Fracture in Smart Materials (pages 133–140)

      Hisashi Serizawa, Tsuyoshi Hajima, Seigo Tomiyama and Hidekazu Murakawa

    17. Fabrication of Ceramic Dental Crowns by using Stereolithography and Powder Sintering Process (pages 141–146)

      Satoko Tasaki, Soshu Kirihara and Taiji Soumura

    18. Large-Sized Structural Ceramic Manufacturing by the Shaping of Thixotropic Slurries (pages 147–158)

      Eugene Medvedovski

    19. Oriented Alumina Ceramics Prepared from Colloidal Processing in Magnetic Field (pages 159–164)

      Satoshi Tanaka, Atsushi Makiya and Keizo Uematsu

    20. Densification Mechanisms of Yttria-Stabilized Zirconia Based Amorphous Powders by Electric Current Assisted Sintering Process (pages 165–176)

      Tatsuo Kumagai and Kazuhiro Hongo

    21. Microstructure Control of Si3N4 Ceramics using Nanocomposite Particles Prepared by Dry Mechanical Treatment (pages 177–182)

      Junichi Tatami, Makoto Noguchi, Hiromi Nakano, Toru Wakihara, Katsutoshi Komeya and Takeshi Meguro

    22. You have free access to this content
      Author Index (pages 183–184)

SEARCH