Ceramic Materials for Energy Applications: Ceramic Engineering and Science Proceedings, Volume 32

Copyright © 2011 The American Ceramic Society. All rights reserved.

Ceramic Materials for Energy Applications: Ceramic Engineering and Science Proceedings, Volume 32

Editor(s): Yutai Katoh, Kevin M. Fox, Hua-Tay Lin, Ilias Belharouak, Sujanto Widjaja, Dileep Singh

Published Online: 16 NOV 2011 11:53AM EST

Print ISBN: 9781118059944

Online ISBN: 9781118095386

DOI: 10.1002/9781118095386

About this Book

Product Information

About The Product

This book is a collection of papers from The American Ceramic Society's 35th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 23-28, 2011. This issue includes papers presented in the Ceramics for Electric Energy Generation, Storage and Distribution; Advanced Ceramics and Composites for Nuclear and Fusion Applications; and Advanced Materials and Technologies for Rechargeable Batteries symposia.

Table of contents

    1. You have free access to this content
      Front Matter (pages i–xiii)

  2. Part I: Carbon Materials and Fuel Ceramics

    1. Irradiation-Induced Dimensional Change and Fracture Behavior of C/C Composites for VHTR Application (pages 1–12)

      Junya Sumita, Taiju Shibata, Kazuhiro Sawa, Ichiro Fujita, Jun Ohashi, Kentaro Takizawa, W. Kim and J. Park

    2. R&D and Irradiation Plans for New Nuclear Grade Graphites for Application to VHTR (pages 13–19)

      Kentaro Takizawa, Kazuyuki Kakehashi, Toshiaki Fukuda, Tohru Kida, Kazuhiro Sawa, Junya Sumita, Yutai Katoh and Lance L. Snead

  3. Part II: Crystalline, Amorphous, and Composite Materials for Waste Immobilization

    1. Functionalized Silica Aerogels: Advanced Materials to Capture and Immobilize Radioactive Iodine (pages 21–32)

      J. Matyáš, G.E. Fryxell, B.J. Busche, K. Wallace and L.S. Fifield

    2. Layered Double Hydroxides for Anion Capture and Storage (pages 33–39)

      J. Phillips and L. J. Vandeperre

    3. Bottom-Up Design of a Cement for Nuclear Waste Encapsulation (pages 41–49)

      T. Zhang, L.J. Vandeperre and C. Cheeseman

  4. Part III: Fuel Ceramics and Irradiation Effects

    1. Microstructural Analysis of Secondary Phases in Silicon Carbide Fabricated with SiC Nano-Powder and Sintering Additives (pages 51–61)

      Takaaki Koyanagi, Sosuke Kondo and Tatsuya Hinoki

    2. Measurements of Irradiation Creep Strain in Silicon Carbide Irradiated with Silicon Ions (pages 63–69)

      S. Kondo, T. Koyanagi, T. Hinoki and O. Hashitomi

  5. Part IV: Joining and Integration of Ceramic Structures

    1. Preliminar Results on Joining of Thin SiC/SiC Composites by Silicides Compounds and Local Heating (pages 71–83)

      Elodie Jacques, Laurence Maillé, Yann LePetitcorps, Christophe Lorrette and Cédric Sauder

    2. Joining of NITE SiC/SiC Composite and Tungsten for Nuclear Applications (pages 85–91)

      H. Kishimoto, T. Abe, T. Shibayama, J.S. Park, H.C. Jung, Y. Kohno and A. Kohyama

  6. Part V: Processing

    1. Integrated R & D of SiC Matrix Ceramic Composites for Energy/Environmental Application (pages 93–101)

      Akira Kohyama, Y. Kohno, H. Kishimoto, J. S. Park, H. C. Jung and K. Shimoda

    2. Effects of Two-Step Sintering on Densification and Performance of Near-Net Shaped NITE-SiC/SiC Composites (pages 103–108)

      N. Nakazato, H. Kishimoto, K. Shimoda, Y. Kohno and A. Kohyama

  7. Part VI: Ceramics for Electric Energy Generation, Storage, and Distribution

    1. Ceramic Processing for Dense Magnesium Diboride (pages 109–120)

      C E J Dancer, R I Todd and C R M Grovenor

    2. Investigation on Phase Transformation of YBCO-In2O3 Composite Superconductor Cooled Down via Different Routes (pages 121–139)

      Y.M.Z. Ahmed, M.S. Hassan and H. Abd-Elatif

    3. Morphologies and Electrochemical Capacitor Behaviors of Co(OH)2/Polyaniline Composite Films (pages 141–149)

      Hiroshi Itahara and Tetsuro Kobayashi

    4. Optimization of Spark-Plasma-Sintering Conditions for Maximizing Figure of Merit of La-Doped SrTiO3 (pages 151–157)

      Asami Kikuchi, Sidney Lin, Noriyuki Okinaka and Tomohiro Akiyama

  8. Part VII: Advanced Materials and Technologies for Rechargeable Batteries

    1. Design of (Thio) Phosphates for High Performance Lithium Ion Batteries (pages 159–176)

      Stefan Adams and Rayavarapu Prasada Rao

    2. Lithium Ion Conductive Solid Electrolyte with Porous/Dense Bi-Layer Structure for All Solid State Battery (pages 177–183)

      Kiyoshi Kanamura, Ryo Oosone, Hirokazu Munakata and Masashi Kotobuki

    3. Autogenic Reactions for Fabricating Lithium Battery Electrode Materials (pages 185–194)

      Vilas G. Pol and M. M. Thackeray

    1. You have free access to this content
      Author Index (pages 195–196)

SEARCH