Characterization, Design, and Processing of Nanosize Powders and Nanostructured Materials: Ceramic Transactions Series, Volume 190

Copyright © 2006 The American Ceramic Society. All rights reserved

Characterization, Design, and Processing of Nanosize Powders and Nanostructured Materials: Ceramic Transactions Series, Volume 190

Editor(s): Kavin G. Ewsuk, Yury Gogotsi

Published Online: 22 JUN 2011 07:36AM EST

Print ISBN: 9780470080337

Online ISBN: 9781118144077

DOI: 10.1002/9781118144077

About this Book

Product Information

About The Product

Provides an organized and carefully selected collection of current research papers from two recent symposia, including The Characterization and Processing of Nanosize Powders and Particles and Nanoscale and Multifunctional Materials symposia both held at the 6th Pacific Rim Conference on Ceramic and Glass Technology in Fall 2005. The topics covered include techniques to characterize nanosize powders and nanoparticle dispersions, green processing of nanopowders, and the sintering and microstructure of nanoparticle assemblies.

Table of contents

    1. You have free access to this content
      Front Matter (pages i–ix)

  2. Part I: Synthesis

    1. Synthesis of High Purity β-Sialon Nanopowder from a Zeolite by Gas-Reduction-Nitridation (pages 1–8)

      Tomohiro Yamakawa, Toru Wakihara, Junichi Tatami, Katsutoshi Komeya and Takeshi Meguro

    2. Electrospinning of Ceramic Nanofibers and Nanofiber Composites (pages 9–20)

      Junhan Yuh, Hyun Park and Wolfgang M. Sigmund

    3. Melt Synthesis and Characterization of (A1-xA'x)(B1-yB'y)O3 Complexed Oxide Perovskites (pages 21–28)

      Tadashi Ishigaki, Kazumasa Seki, Shunji Araki, Naonori Sakamoto, Tomoaki Watanabe and Masahiro Yoshimura

    4. Carbon Derived Si3N4+SiC Micro/Nano Composite (pages 29–36)

      Ján Dusza, Monika Kašiarová, Alexandra Vysocká, Jana Špaková, Miroslav Hnatko and Pavol Šajgalík

  3. Part II: Dispersion

    1. Modification of Nanosize Silica Particle Surfaces to Improve Dispersion in a Polymer Matrix (pages 37–45)

      Chika Takai, Masayoshi Fuji and Minoru Takahashi

    2. Possibility of Comb-Graft Copolymers as Dispersants for SiC Suspensions in Ethanol (pages 47–59)

      Toshio Kakui, Mitsuru Ishii and Hidehiro Kamiya

    3. Dispersion Control and Microstructure Design of Nanoparticles by using Microbial Derived Surfactant (pages 61–69)

      Hidehiro Kamiya, Yuichi Iida, Kenjiro Gomi, Yuichi Yonemochi, Shigekazu Kobiyama, Motoyuki Iijima and Mayumi Tsukada

  4. Part III: Forming

    1. Analysis of Consolidation Behavior of 68 nm Yttria-Stabilized Zirconia Particles during Pressure Filtration (pages 71–84)

      Yoshihiro Hirata and Yosuke Tanaka

    2. Colloidal Processing and Sintering of Nano-ZrO2 Powders using Polyethylenimine (PEI) (pages 85–93)

      Yuji Hotta, Cihangir Duran, Kimiyasu Sato and Koji Watari

    3. Importance of Primary Powder Selection in Aerosol Deposition of Aluminum Nitride (pages 95–104)

      Atsushi Iwata and Jun Akedo

    4. Preparation of 3D Colloidal Sphere Arrays using Barium Titanate Fine Particles and their Dielectric Properties (pages 105–113)

      Satoshi Wada, Hiroaki Yasuno, Aki Yazawa, Takuya Hoshina, Hirofumi Kakemoto and Takaaki Tsurumi

  5. Part IV: Sintering and Properties

    1. Sintering and Mechanical Properties of SiC using Nanometer-Size Powder (pages 115–128)

      Nobuhiro Hidaka and Yoshihiro Hirata

    2. Mechanical Properties of Ce-Doped Zirconia Ceramics Sintered at Low Temperature (pages 129–139)

      Michihito Muroi and Geoff Trotter

    3. Using Master Curve Model on the Sintering of Nanocrystalline Titania (pages 141–149)

      Mao-Hua Teng and Mong-Hsia Chen

    4. Mechanical Properties and Hardness of Advanced Superhard Nanocrystalline Films and Nanomaterials (pages 151–159)

      Murli H. Manghnani, Pavel V. Zinin, Sergey N. Tkachev, Pavla Karvankova and Stan Veprek

  6. Part V: Nanocomposites and Nanostructures

    1. Initial Investigation of Nano-TiC/Ni and TiC/Ni3Al Cermets for SOFC Interconnect Applications (pages 161–171)

      Hua Xie and Rasit Koc

    2. Intra-Type Nanocomposites for Strengthened and Toughened Ceramic Materials (pages 173–180)

      Seong-min Choi, Sawao Honda, Shinobu Hashimoto and Hideo Awaji

    3. Periodic Nanovoid Structure in Glass via Femtosecond Laser Irradiation (pages 181–189)

      Shingo Kanehira, Koji Fujita, Kazuyuki Hirao, Jinhai Si and Jianrong Qiu

    4. Materials Properties of Nano-Sized FeAlN Particles in Thin Films (pages 191–201)

      Yuandan Liu, R. E. Miller, Dingqiang Li, Qiquan Feng, W. Votava, Tao Zhang, L. N. Dunkleberger, X. W. Wang, R. Gray, T. Bibens J. Helfer, K. Mooney, R. Nowak and P. Lubitz

    5. Preparation and Properties of Mullite - Based Iron Multi - Functional Nanocomposites (pages 203–211)

      Hao Wang, Weimin Wang, Zhengyi Fu, Tohru Sekino and Koichi Niihara

    6. Design of Nanohybrid Materials with Dual Functions (pages 213–225)

      Jin-Ho Choy

    7. Single-Crystal SiC Nanotubes: Molecular-Dynamic Modeling of Structure and Thermal Behavior (pages 227–232)

      V.L. Bekenev, V.V. Kartuzov and Y. Gogotsi

    8. Vibrational Spectrum of a Diamond-Like Film on SiC Substrate (pages 233–235)

      V. Shevchenko, Y. Gogotsi and E. Kartuzov

    1. You have free access to this content
      Author Index (pages 237–238)

SEARCH