Characterization and Control of Interfaces for High Quality Advanced Materials II: Ceramic Transactions, Volume 198

Characterization and Control of Interfaces for High Quality Advanced Materials II: Ceramic Transactions, Volume 198

Editor(s): Kevin Ewsuk, Kiyoshi Nogi, Rolf Waesche, Yukichi Umakoshi, Tom Hinklin, Keizo Uematsu, Tony Tomsia, Hiroya Abe, Hidehiro Kamiya, Makio Naito

Published Online: 28 JUN 2011 09:44AM EST

Print ISBN: 9780470184141

Online ISBN: 9781118144145

DOI: 10.1002/9781118144145

About this Book

This volume includes papers from the Second International Conference on Characterization and Control of Interfaces for High Quality Advanced Materials, and Joining Technology for New Metallic Glasses and Inorganic Materials (ICCCI2006) in Kurashiki, Japan, 2006. Interfaces are critically important to a broad spectrum of materials and technologies. This Proceedings of ICCCI 2006 features 71 peer-reviewed papers on interface characterization and control technology for materials synthesis, powder processing, composite processing, joining, and to control airborne particulates.

Table of contents

    1. You have free access to this content
  1. Part I: Joining Technology for New Metallic Glasses and Inorganic Materials

    1. Fabrication of Colloidal Photonic Crystals from Submicron-Sized Spheres (pages 33–38)

      Daisuke Nagao, Mitsuaki Hirose, Ryoji Kameyama, Hideki Matsumoto, Yoshio Kobayashi and Mikio Konno

    2. Porous Bulk Metallic Glass Produced by Spark Plasma Sintering of Gas Atomized Zr55Cu30Al10Ni5 Glassy Powders (pages 45–50)

      Guoqiang Xie, Wei Zhang, Qingsheng Zhang, Dmitri V. Louzguine-Luzgin, Akira Okubo, Hisamichi Kimura and Akihisa Inoue

    3. Dissolution of Hydrogen into Tungsten Phosphate Glasses through Palladium Coating (pages 63–68)

      Hiromasa Tawarayama, Hiroshi Kawazoe, Shouichi Sugata, Futoshi Utsuno, Hiroyuki Inoue and Hideo Hosono

    4. Properties of Metallic Glass Coatings on An Aluminum Alloy Substrate Produced Using A HVOF Spraying Process (pages 69–77)

      Hyun-Guen Kim, Kazuhiro Nakata, Takuya Tsumura, Masaharu Sugiyama, Takanori Igarashi, Masahiro Fukumoto, Hisamichi Kimura and Akihisa Inoue

    5. Photoelectron Spectroscopic Study of Energy Level Alignment at C12A7:e- / Alq3 Interfaces (pages 79–84)

      Ki-Beom Kim, Maiko Kikuchi, Masashi Miyakawa, Hiroshi Yanagi, Toshio Kamiya, Masahiro Hirano and Hideo Hosono

    6. Weldability and Mechanical Property of Ni53Nb20Ti10Zr8Co6Cu3 Metallic Glass Foil by Laser Welding (pages 109–115)

      Takuya Tsumura, Katsunori Kobayashi, Kazuhiro Nakata, Natsuki Yoneyama, Taichi Murakami, Hisamichi Kimura and Akihisa Inoue

    7. Glass Transition Phenomena and Heat Capacity of Zr0.55Al0.10Ni0.05Cu0.30 (pages 117–122)

      Yosuke Moriya, Takahiro Yoshida, Hitoshi Kawaji, Tooru Atake, Mikio Fukuhara, Hisamichi Kimura and Akihisa Inoue

  2. Part II: Nano-Particles and Powders

    1. Controlling Interfacial Chemistry During the Processing of Micron Scale Surgical Instruments (pages 179–184)

      Nicholas Antolino, Gregory Hayes, James H. Adair, Christopher Muhlstein, Mary Frecker and Eric Mockensturm

    2. A Facile Method to Synthesize ZNO Tubes by Involving Ammonia Bubbles (pages 269–274)

      Liwei Lin, Yongsheng Han, Masayoshi Fuji, Takeshi Endo, Hideo Watanabe and Minoru Takahashi

    3. Rapid Drying Technique for Slip Cast Body (pages 275–279)

      Takashi Shirai, Masaki Yasuoka, Yoshiaki Kinemuchi, Yuji Hotta and Koji Watari

  3. Part III: Interface Characterization and Control

  4. Part IV: Energy and Environment

    1. Evaluation of the Long Term Stability of LSM/ScSZ Composite Powder Materials for SOFC Cathodes (pages 317–323)

      Akifusa Hagiwara, Natsuro Hobara, Hiroyuki Shimada, Koichi Takizawa, Kazuyoshi Sato, Hiroya Abe and Makio Naito

    2. Development of Filtration Technology for PM2.5 in Diesel Exhaust (pages 339–344)

      Masahiro Yoshikawa, Tomihiko Uemura, Daiki Kan, Takehisa Fukui, Tawatchai Charinpanitkul, Wiwut Tanthapanichakoon and Makio Naito

  5. Part V: Smart Processing Technology

    1. Nanoscale Particle Processing through Aerosol Routes (pages 345–352)

      Olivera B. Milosevic, Lidija T. Mancic, Maria Eugenia Rabanal, Luz Gomez and Jose Manuel Torralba

  6. Part VI: Materials Design

    1. Plasma Thermal Deposition of Aluminum on Mg-Li Work-Hardened Alloy (pages 453–459)

      Masato Tsujikawa, Shin-ichiro Adachi, Kazuhiro Nakata, Masaichiro Kamita and Sachio Oki

    1. You have free access to this content

SEARCH