Proceedings of the 1st World Congress on Integrated Computational Materials Engineering (ICME)

Copyright © 2011 The Minerals, Metals & Materials Society. All rights reserved.

Proceedings of the 1st World Congress on Integrated Computational Materials Engineering (ICME)

Editor(s): John Allison, Peter Collins, George Spanos

Published Online: 7 SEP 2011 09:05AM EST

Print ISBN: 9780470943199

Online ISBN: 9781118147726

DOI: 10.1002/9781118147726

About this Book

Product Information

About The Product

In its most advanced form, Integrated Computational Materials Engineering (ICME) holistically integrates manufacturing simulation, advanced materials models and component performance analysis. This volume contains thirty-five papers presented at the 1st World Congress on Integrated Computational Materials Engineering. Modeling processing-microstructure relationships, modeling microstructure-property relationships, and the role of ICME in graduate and undergraduate education are discussed. Ideal as a primary text for engineering students, this book motivates a wider understanding of the advantages and limitations offered by the various computational (and coordinated experimental) tools of this field.

Table of contents

    1. You have free access to this content
      Front Matter (pages i–xiv)

  2. Part I: Modeling Processing-Microstructure Relationships

    1. Correlated Nucleation of Precipitates in Magnesium Alloy WE54 (pages 1–8)

      Hong Liu, Yipeng Gao, Yunzhi Wang and Jian-Feng Nie

    2. From Processing to Properties: Through-Process Modeling of Aluminum Sheet Fabrication (pages 9–17)

      G. Gottstein and V. Mohles

    3. Advancement in Characterization and Modeling of Boundary Migration during Recrystallization (pages 19–26)

      Dorte Juul Jensen, Yubin Zhang, Andy Godfrey and Nele Moelans

    4. Effect of Pulling Velocity on Dendrite Arm Spacing in Steady-State Directionally Solidified Transparent Organic Alloy by Numerical Simulation (pages 27–33)

      Yufeng SHI, Qingyan XU, Ming GONG and Baicheng LIU

    5. More Efficient ICME through Materials Informatics and Process Modeling (pages 35–42)

      B. P. Gautham, R. Kumar, S. Bothra, G. Mohapatra, N. Kulkarni and K. A. Padmanabhan

    6. Multi-Attribute Integrated Forming-Crush Simulation Optimization Using Internal State Variable Model (pages 43–56)

      Ali Najafi, Masoud Rais-Rohani and Youssef Hammi

    7. Multiscale Modeling of Polycrystalline Magnetostrictive Alloy Galfenol: Microstructural Model (pages 57–62)

      Veera Sundararaghavan

    8. Numerical Evaluation of Energy Transfer during Surface Mechanical Attrition Treatment (pages 63–68)

      Xiaochun ZHANG, Jian LU and San-Qiang SHI

    9. Phase-Field Simulation and Experimental Study of Precipitates in an Al-Si-Mg Alloy (pages 69–73)

      Zhiqiang Gao, Hengcheng Liao, Ke Dong and Qigui Wang

    10. Towards a Virtual Platform for Materials Processing (pages 75–80)

      Georg J. Schmitz and Ulrich Prahl

    11. Integrated Modeling of Tundish and Continuous Caster to Meet Quality Requirements of Cast Steels (pages 81–86)

      Amarendra K Singh, Ravindra Pardeshi and Sharad Goyal

  3. Part II: Modeling Microstructure-Property Relationships

    1. Microstructure-based Description of the Deformation of Metals: Theory and Application (pages 87–98)

      Dirk Helm, Alexander Butz, Dierk Raabe and Peter Gumbsch

    2. Large Scale Finite Element Computations Using Real Grain Microstructures (pages 99–105)

      H. Proudhon

    3. Modelling and Measurement of Plastic Deformation and Grain Rotation at the Grain-to-Grain Level (pages 107–112)

      David Gonzalez, Andrew King, Igor Simonovski, João Quinta da Fonseca and Philip J. Withers

    4. Multi-Time Scaling Image Based Crystal Plasticity FE Models Dwell Fatigue Initiation in Polycrystalline Ti Alloys (pages 113–119)

      Somnath Ghosh and Michael G. Callas

    5. Virtual Mechanical Testing of Composites: From Materials to Components (pages 121–127)

      Javier LLorca and Carlos González

    6. Design of Multifunctional Material Structures Using Topology Optimization with Feature Control (pages 129–134)

      James K Guest and Seung-Hyun Ha

    7. Development of Neural Networks for the Prediction of the Interrelationship between Microstructure and Properties of Ti Alloys (pages 135–143)

      S. Koduri, P.C. Collins, D. Huber, B. Welk and H.L. Fraser

    8. Characterizing Residual Stresses in Monolithic Silicon-Carbide through the Use of Finite Element Analysis (pages 145–150)

      Brian Munn and Keyu Li

    9. Density Functional Theory Based Calculations of Site Occupancy in the Gamma Prime Ni3al Phase of Nickel Based Super Alloys (pages 151–157)

      Mrunalkumar Chaudhari, Jincheng Du, Jaimie Tiley and Rajarshi Banerjee

    10. Informatics for Mapping Engineering Data (pages 159–164)

      Scott R. Broderick and Krishna Rajan

    11. Microstructural Property Considerations in the Design of Stainless Steel Articles Case Hardened by Low-Temperature Carburization (pages 165–170)

      Jeffrey M. Rubinski, Sunniva R. Collins and Peter C. Williams

    12. Deformation Twin Induced by Multi-strain in Nanocrystalline Copper: Molecular Dynamic Simulation (pages 171–176)

      Kaiguo Chen, S Q Shi and J Lu

    13. Nondestructive Evaluation Modeling as an Integrated Component of ICMSE (pages 177–182)

      James L. Blackshire, Ray T. Ko and Ming-Yung Chen

    14. Numerical Simulation of Brake Discs of CRH3 High-Speed Trains Based on Ansys (pages 183–188)

      Liang Yu, YanLi Jiang, Senkai Lu, Kun Luo and HongQiang Ru

    15. Modeling and Simulation of Process-Structure-Property of Magnesium Alloy Casting (pages 189–194)

      Zhiqiang HAN, Liang HUO and Baicheng LIU

  4. Part III: The Role of ICME in Graduate and Undergraduate Education, Information Infrastructure, and Success Stories

    1. Teaching Transport Phenomena through Spreadsheet Programming and Numerical Methods (pages 195–202)

      James D. McGuffin-Cawley

    2. History of ICME in the European Aluminium Industry (pages 203–210)

      Jürgen Hirsch and Kai F. Karhausen

    3. ICME Success at Timken – The Virtual Fatigue Life Test (pages 211–215)

      Patrick I. Anderson, Xiaolan Ai, Peter C. Glaws and Krich Sawamiphakdi

    4. Advances in Computational Tools for Virtual Casting of Aluminum Components (pages 217–222)

      Qigui Wang, Peggy Jones, Yucong Wang and Dale Gerard

    5. Modelling the Process Chain of Microalloyed Case Hardening Steel for Energy Efficient High Temperature Carburising (pages 223–228)

      Sergey Konovalov, Thomas Henke, Stefan Benke, Georg J. Schmitz, Markus Bambach and Ulrich Prahl

    6. Cyberinfrastructure Support for Integrated Computational Materials Engineering (pages 229–234)

      Tomasz Haupt

    7. Stability of Fe-C Martensite–Effect of Zener-Ordering (pages 235–240)

      Reza Naraghi and Malin Selleby

    8. Unintended Consequences: How Qualification Constrains Innovation (pages 241–246)

      Craig A. Brice

    9. What Barriers Prevent ICME from Becoming Part of the Designer's Toolbox? (pages 247–252)

      P. L. Ret

    1. You have free access to this content
      Author Index (pages 253–254)

    1. You have free access to this content
      Subject Index (pages 255–256)

SEARCH