Advances in Solid Oxide Fuel Cells VIII

Copyright © 2013 The American Ceramic Society. All rights reserved.

Advances in Solid Oxide Fuel Cells VIII

Editor(s): Prabhakar Singh, Narottam P. Bansal, Michael Halbig, Sanjay Mathur

Published Online: 29 NOV 2012 11:23AM EST

Print ISBN: 9781118205945

Online ISBN: 9781118217481

DOI: 10.1002/9781118217481

About this Book

Product Information

About The Product

The Ninth International Symposium on Solid Oxide Fuel Cells: Materials, Science, and Technology was held in January 2012 as part of the 36th International Conference on Advanced Ceramics and Composites (ICACC). This symposium provided an international forum for scientists, engineers, and technologists from around the world to present and discuss the latest advances in solid oxide fuel cells. This issue features fourteen papers selected from the symposium, offering readers a broad panorama of the current status of solid oxide fuel cells technology, as well as emerging issues and future directions in the field.

Table of contents

    1. You have free access to this content
      Front Matter (pages i–xi)

    2. Investigation of Novel Solid Oxide Fuel Cell Cathodes Based on Impregnation of SrTixFe1−xO3-δ into Ceria-Based Backbones (pages 1–12)

      M. Brinch-Larsen, M. Søgaard, J. Hjelm and H. L. Frandsen

    3. Freeze-Tape Casting for the Design of Anode-Delivery Layer in Solid Oxide Fuel Cells (pages 13–21)

      Jacob Bunch, Yu Chen, Fanglin Chen and Matthew May

    4. Tailoring the Anode Microstructure in Micro-Tubular Sofcs by the Optimization of the Slurry (pages 23–33)

      Michele Casarin, Riccardo Ceccato and Vincenzo M. Sglavo

    5. Mixed Conducting Praseodymium Cerium Gadolinium Oxide (PCGO) Nanocomposite Cathode for ITSOFC Applications (pages 35–46)

      Rajalekshmi Chockalingam, Ashok Kumar Ganguli and Suddhasatwa Basu

    6. Development of GDC-(LiNa)CO3 Nano-Composite Electrolytes for Low Temperature Solid Oxide Fuel Cells (pages 47–59)

      Rajalekshmi Chockalingam, Ashok Kumar Ganguli and Suddhasatwa Basu

    7. Weibull Strength Variations between Room Temperature and High Temperature Ni-3YSZ Half-Cells (pages 61–69)

      Declan J Curran, Henrik Lund Frandsen and Peter Vang Hendriksen

    8. In-Situ XRD of Operating LSFC Cathodes: Development of a New Analytical Capability (pages 71–83)

      John S. Hardy, Jared W. Templeton and Jeffry W. Stevenson

    9. Proton Conduction Behaviors in Ba- and Mg-Doped LaGaO3 (pages 85–91)

      Xuan Zhao, Nansheng Xu, Kevin Romito, Kevin Huang, Alisha Lucas and Changyong Qin

    10. Silver-Palladium Alloy Electrodes for Low Temperature Solid Oxide Electrolysis Cells (SOEC) (pages 93–103)

      Michael Keane and Prabhakar Singh

    11. Development of Improved Tubular Metal-Supported Solid Oxide Fuel Cells towards High Fuel Utilization Stability (pages 105–115)

      L. Otaegui, L.M. Rodriguez-Martinez, M. A. Alvarez, F. Castro and I. Villarreal

    12. Highlighting DOE EERE Efforts for the Development of SOFC Systems for APU and Stationary Applications (pages 117–124)

      David R. Peterson, Jacob S. Spendelow and Dimitrios C. Papageorgopoulos

    13. Efficient Planar SOFC Technology for a Portable Power Generator (pages 125–136)

      Andreas Poenicke, Sebastian Reuber, Christian Dosch, Stefan Megel, Mihails Kusnezoff, Christian Wunderlich and Alexander Michaelis

    14. Investigation of Ni-Yttria Stabilized Zirconia Anode for Solid-Oxide Fuel Cell using XAS Analysis (pages 137–144)

      Koichi Hamamoto, Toshio Suzuki, Bo Liang, Toshiaki Yamaguchi, Hirofumi Sumi, Yoshinobu Fujishiro, Brian Ingram, A. Jeremy Kropf and J. David Carter

    15. Processing of Gadolinium-Doped Ceria Electrolyte Layers with a Thickness of ∼1 MM: Thin Film Wet Coating Methods and PVD (pages 145–157)

      Tim Van Gestel, Hyo-Jeong Moon, Doris Sebold, Sven Uhlenbruck and Hans Peter Buchkremer

    16. You have free access to this content
      Author Index (pages 159–160)

SEARCH