Supplemental Proceedings: Materials Properties, Characterization, and Modeling, Volume 2

Supplemental Proceedings: Materials Properties, Characterization, and Modeling, Volume 2

Editor(s): TMS

Published Online: 7 JUN 2012 02:00PM EST

Print ISBN: 9781118296097

Online ISBN: 9781118357002

DOI: 10.1002/9781118357002

About this Book

This book contains chapters on cutting-edge developments presented at the TMS annual conference of 2012.

Table of contents

    1. You have free access to this content
  1. Part I: 2012 Functional and Structural Nanomaterials: Fabrication, Properties, Applications and Implications

    1. 3D Multiwall Carbon Nanotubes (MWCNTs) for Li-Ion Battery Anode (pages 35–41)

      Chiwon Kang, Indranil Lahiri, Rangasamy Baskaran, Mansoo Choi, Won-Gi Kim, Yang-Kook Sun and Wonbong Choi

    2. RTS Noise Analysis in Fin-type Silicon-Oxide-High-k-Oxide-Silicon Flash Memory (pages 81–86)

      Seung Dong Yang, Kwang Seok Jeong, Ho Jin Yun, Yu Mi Kim, Sang Youl Lee, Sung Kyu Kwon, Jae sub Oh, Hi Deok Lee and Ga Won Lee

    3. The Post-Annealing Effects of N-Doped ZnO Films Deposited by the Atomic Layer Deposition (pages 101–106)

      Kwang Seok Jeong, Yu Mi Kim, Ho Jin Yun, Seung Dong Yang, Sang Youl Lee, Young Su Kim, Hi Deok Lee and Ga Won Lee

  2. Part II: Computational Thermodynamics and Kinetics

  3. Part III: Defects and Properties of Cast Metals

    1. Modeling of Die Filling of Low-Pressure Die-Cast Aluminum Alloy Wheels (pages 177–184)

      Jianglan Duan, Daan M. Maijer, Steve L. Cockcroft, Carl Reilly, Ken Nguyen and Dominic Au

    2. Tensile Properties, Porosity and Melt Quality Relation of A356 (pages 201–208)

      Derya Dispinar, Shahid Akhtar, Arne Nordmark, Freddy Syvertsen, Marisa Di Sabatino and Lars Arnberg

  4. Part IV: Deformation, Damage, and Fracture of Light Metals and Alloys

  5. Part V: Emeritus Professor George D.W. Smith Honorary Symposium

    1. Microstructural Characterisation of Nanometre Scale Irradiation Damage in High-Ni Welds (pages 487–502)

      J.M. Hyde, R.M. Boothby, C.A. English, P. Styman, H. Thompson, G.D.W. Smith, K. Wilford and TJ. Williams

  6. Part VI: From Macro to Nano, Understanding Mechanical Behavior across Length Scales: A Structural Materials Division Symposium in Honor of Robert Ritchie

    1. Tensile Deformation of Quenched and Partitioned Steel – A Third Generation High Strength Steel (pages 555–562)

      Jason Coryell, Josh Campbell, Vesna Savic, John Bradley, Sushil Mishra, Shashank Tiwari and Louis Hector, Jr

  7. Part VII: General Poster Session

    1. Phase Decomposition in Isothermally-Aged Fe-Cr Alloys (pages 581–588)

      Victor M. Lopez-Hirata, Hector J. Dorantes Rosales, Erika O. Avila-Davila and Maribel L. Saucedo-Muñoz

    2. Mechanical Properties of Nanocomposites Based on PA6 Blends (pages 613–619)

      TMS, Pankaj Agrawal, Gustavo F. Brito, Bartira B. Cunha, Shirley N. Cavalcanti, Edcleide M. Araújo and Tomás J. A. Mélo

  8. Part VIII: Integrative Materials Design: Performance and Sustainability

  9. Part IX: Materials Design Approaches and Experiences III

  10. Part X: Mechanical Behavior at Nanoscale I

    1. Nanomechanical Properties of Atomic Layer Deposition Sb2Te3 Thin Films (pages 731–737)

      M. A. Mamun, D. Gu, D. Nminibapiel, H. Baumeart, H. Robinson, V. Kochergin and A. A. Elmustafa

  11. Part XI: Minerals, Metals and Materials under Pressure

  12. Part XII: Stochastic Methods in Materials Research

  13. Part XIII: Symposium in Memory of Patrick Veyssière: Understanding the Mechanisms Controlling Plastic Flow

  14. Part XIV: Ultrasonic Fatigue of Advanced Materials and Systems

  15. Part XV: TMS2011 General Poster Session

  16. Part XVI: TMS2011 General Abstracts: Structural Materials Division

    1. You have free access to this content
    2. You have free access to this content