EPD Congress 2012

Copyright © 2012 The Minerals, Metals, & Materials Society. All rights reserved.

EPD Congress 2012

Editor(s): Lifeng Zhang, Joseph A. Pomykala, Arjan Ciftja

Published Online: 15 MAY 2012 09:52AM EST

Print ISBN: 9781118291405

Online ISBN: 9781118359341

DOI: 10.1002/9781118359341

About this Book

Product Information

About The Product

Proceedings symposia sponsored by the Extraction & Processing Division (EPD) of The Minerals, Metals & Materials Society (TMS)
Held during the TMS 2012 Annual Meeting & Exhibition Orlando, Florida, USA, March 11-15,2012

Table of contents

    1. You have free access to this content
      Front Matter (pages i–xix)

  2. Part I: Physical Metallurgy of Steel

    1. Influence of the Hot Rolling Process on the Mechanical Behaviour of Dual Phase Steel (pages 1–16)

      Mehdi Asadi and Heinz Palkowski

    2. Continuous Casting Simulation of 2304 Duplex Stainless Steel Via Horizontal Directional Solidification Technique (pages 17–23)

      Qingqing Sun, Honggang Zhong, Xiangru Chen and Qijie Zhai

    3. Influence of Cooling Rates on Nitrogen Precipitation Behaviors and the Ferrite Fraction in Cast 2507 Super Duplex Stainless Steel (pages 25–31)

      Dong Liang, Honggang Zhong, Zhenxing Yin and Qijie Zhai

    4. Microstructure and Corrosion Behaviour of TiC Reinforced Duplex Stainless Steels Matrix Composites Synthesized by Laser Melt Injection (pages 33–40)

      Babatunde Obadele, Peter Olubambi and Oluwagbenga Johnson

  3. Part II: Process Metallurgy of Metals

    1. A Critical Review of the Modified Froude Number in Ladle Metallurgy (pages 41–50)

      K. Krishnapisharody and G. A. irons

    2. Inclusion Characteristics in Stainless Steel Ingots (pages 51–61)

      Shufeng Yang, Lifeng Zhang, Yongfeng Chen, Jun Ge, Greg Dowling and George Shannon

    3. FEM Study of Centerline Defect Closure in Large Open-Die Forgings (pages 63–70)

      Jie Zhou, Joshua Blackketter and Philip Nash

    4. Effect of Mould Taper and Wall Thickness on Steel Ingots Soundness by 3-D Solidification Simulation (pages 71–78)

      Peng Lan, Yang Li, Jiaquan Zhang, Ruitian Zhang, Jingyuan Wang and Hengyi Zhang

    5. Hydrometallurgical Study of Purifying M-G Silicon Feedstock for Solar Cells Production (pages 79–86)

      Yongqiang Liu, Jilai Xue and Jun Zhu

    6. The Effect of Fe Addition on the Activity of Si in Liquid Cu-Si Alloys (pages 87–94)

      Yuichi Kato, Takeshi Yoshikawa and Kazuki Morita

    7. Thermodynamic Properties of the Silicon Binary Melts (pages 95–102)

      Jafar Safarian, Leiv Kolbeinsen and Merete Tangstad

  4. Part III: Application of Microwave, Magnet, Laser and Plasma Technology

    1. Non-Contact Measurements in Liquid Metal Free-Surface Flow Using Time-of-Flight Lorentz Force Velocimetry (pages 103–112)

      Dandan Jian and Christian Karcher

    2. Modeling of Pulsed-Laser Superalloy Powder Deposition Using Moving Distributed Heat Source (pages 113–120)

      M. M. Mahapatra and Leijun Li

    3. Heat Transfer Characteristics of Magnetite under Microwave Irradiation (pages 121–128)

      Zhiwei Peng, Jiann-Yang Hwang, Matthew Andriese, Zheng Zhang and Xiaodi Huang

    4. Refinement Effect of Pulse Magneto-Oscillation on Solidification Structure of Medium Carbon Steel (pages 129–134)

      Yufeng Cheng, Zhenxing Yin, Xin Cao, Yongyong Gong, Renxing Li and Qijie Zhai

    5. Solidification Structure Refinement of SUS430 Ferritic Stainless Steel by Electric Current Pulse (pages 135–141)

      Xin Cao, Zhenxing Yin, Yufeng Cheng, Renxing Li, Yongyong Gong and Qijie Zhai

  5. Part IV: Metallurgy of Non-Ferrous Metals

    1. Annealing Effect and Tensile Interface Fracture Mechanism of Pure Silver Bonding Wires (pages 142–152)

      Hao-Wen Hsueh, Fei-Yi Hung, Truan-Sheng Lui and Li-Hui Chen

    2. Horizontal Directional Solidification of Zn-Al Alloys (pages 153–160)

      Marco Zurco, Carlos M. Rodriguez, Carlos E. Schvezov, Claudia M. Mendez and Alicia E. Ares

    3. Dynamic Recovery during Low Temperature Deformation in an Al-0.1 Mg Alloy (pages 161–168)

      Y. Huang and P. B. Prangnell

    4. Challenges in Compound Forging of Steel-Aluminum Parts (pages 169–176)

      Klaus-Georg Kosch and Bernd-Arno Behrens

  6. Part X: Poster Session

    1. Effect of Process Parameters on Powdering Characteristics of Galvannealed Materials (pages 177–184)

      Khursid Alam Khan, R J Singh and Shantanu Chakrabarti

    2. Hot Deformation Behavior of Nb Microalloyed Coiled Tubing Steel (pages 185–191)

      Zhendong Zhang, Haitao Zhou, Xianghua, Liu, Sijun Li, Guofei Si and Bingyu Zhang

    3. Study on Inclusions in 65Mn Thin Slabs Produced by a CSP Process (pages 193–199)

      Tan Yi, Honggang Zhong, Zhao Dan, Xinping Mao, Qijie Zhai and Huigai Li

    4. A Way to Control Distortion of Metal Parts during Heat Treatment Process (pages 201–207)

      Yuan Lu, Jinwu Kang, Haimin Long, Gang Nie and Tianyou Huang

    5. Investigation of the Relationship of the Melt Structures and Solidification Behaviors of Cu-Sb70 Alloy Explored by Electrical Resistivity Method (pages 209–215)

      Yun Xi, Jin Yu, Li-Na Mao and Fang-Qiu Zu

    6. Microstructure of Al2O3/YAG/ZrO2 Eutectic In Situ Composite Prepared by Laser Floating Zone Melting (pages 217–224)

      Kan Song, Jun Zhang, Xiaojiao Jia, Haijun Su, Lin Liu and Hengzhi Fu

    7. Net Shape Manufacturing of a Novel Cermet Using Self-Propagating High Temperature Synthesis (pages 225–232)

      Atefeh Nabavi, Alexander Cappozi, Sam Goroshin, David Frost and Francois Barthelat

    8. AMD Treatment Using Rice Husk as Biosorbent (pages 434–442)

      Flävia Paulucci Cianga Silvas, Bianca Medeiros, Daniella Cardoso Buzzi, Ivo Andre Homrich Schneider, Jose Roberto de Oliveira, Denise Crocce Romano Espinosa and Jorge Alberto Soares Tenorio

    9. Salvinia sp Applied to AMD Treatment: Equilibrium Time and Biomass Characterization (pages 443–450)

      Flävia Paulucci Cianga Silvas, Erika Gusmäo, Daniella Cardoso Buzzi, lvo Andre Homrich Schneider, Jose Roberto de Oliveira, Denise Crocce Romano Espinosa and Jorge Alberto Soares Tenorio

  7. Part VI: Electronics

    1. Control of Gas Emission during Pyrolysis of Waste Printed Wiring Boards (pages 233–245)

      Alex Luyima, Lifeng Zhang, Jaan Kers and Thomas Schuman

    2. Leaching Studies for Metals Recovery from Waste Printed Wiring Boards (PWBs) (pages 247–254)

      Alex Luyima, Honglan Shi, Lifeng Zhang and Yongqing Jiang

    3. Effects of Inoculums Volume on Metals Extraction from Printed Circuit Boards of Computers by Bacterial Leaching (pages 255–262)

      Luciana Harue Yamane, Denise Crocce Romano Espinosa and Jorge Alberto Soares Tenorio

    4. Removal of Copper Cyanide Complexes from Solutions Formed in Silver/Gold-Cyanidation Recovery Process (pages 263–270)

      Jose R. Parga, Jesus L. Valenzuela and Luciano E. Ramirez

    5. Dissolution of Mixed Zinc-Carbon and Alkaline Battery Powders in Sulphuric Acid Using Ascorbic/Oxalic Acid as a Reductant (pages 271–287)

      Muammer Kaya and Sait Kursunoglu

    6. Selective Recovery of Precious Metals by Selective Adsorption on Garlic Peel Gel (pages 289–296)

      Kai Huang, Shuqiang Jiao and Hongmin Zhu

    7. Separation of Si/SiC Wiresaw Cutting Powder Through Sedimentation by Adjusting the Solution pHs (pages 297–304)

      Kai Huang, Hao Deng, Jichao Li and Hongmin Zhu

  8. Part VII: Metals

    1. Advantages of Integrated and Long Term Aluminum Recycling Batch Planning in a Constrained Secondary Material Market (pages 305–314)

      Tracey Brommer, Elsa Olivetti, Britt Elin Gihleengen and Randolph Kirchain

    2. Fabrication of Replicated Open-cell Aluminium Foams Using Recycled ADC12 Aluminium Alloy (pages 315–322)

      Seksak Asavavisithchai, Natthida Jareankieathbovorn and Areeya Srichaiyaperk

    3. In-Process Separation of Mill Scale From Oil at Steel Hot Rolling Mills (pages 323–329)

      Naiyang Ma

    4. Recycling of Electric Arc Furnace Dust: Evaluation of the Iron Metal Incorporation in Hot Metal Bath (pages 331–338)

      Vicente de Paulo Ferreira Marques Sobrinho, Jose Roberto de Oliveira, Victor Bridi Teiles, Felipe Fardin Grillo, Jorge Alberto Soares Tenorio and Denise Crocce Romano Espinosa

    5. Recycling of Electric Arc Furnace Dust in Iron Ore Sintering (pages 339–344)

      V. B. Teiles, D. C. R. Espinosa and J. A. S. Tenorio

    6. Extraction of Iron Oxide and Concentration of Titanium Compounds in Red Mud (pages 345–352)

      Edilson Marques Magalhäes, Emanuel Negräo Macedo, Danielly Da Silva Quaresma, Jose Antonio da Silva Souza and Joäo Nazareno Nonato Quaresma

    7. Heat Treatment of Black Dross for the Production of a Value Added Material-A Preliminary Study (pages 353–360)

      Reza Beheshti, Shahid Akhtar and Ragnhild E. Aune

    8. Addition of Electric Arc Furnace Dusts in Hot Metal (pages 361–367)

      TMS, Msc. Felipe Fardin Grillo, Ph.D. Jose Roberto de Oliveira, Ph.D. Denise Crocce Romano Espinosa and Ph.D. Jorge Alberto Soares Tenorio

  9. Part VIII: Building Materials

    1. Ecological Recovery Process for Textile Waste (pages 368–374)

      Eftalea Carpus, Emilia Visileanu and Michaela Dina Stanescu

    2. Technical Tools for Increasing the Eco-Efficiency of Textile Products (pages 375–380)

      Emilia Visileanu and Eftalea Carpus

    3. An Evaluation Study: Recent Developments and Processing of Glass Scrap Recycling (pages 381–388)

      Burcu Ertuǧ and Nectp Ünlü

    4. Recycling of Flat Glass Waste into Clayey Ceramic (pages 389–394)

      Thais Cristina da Costa Caldas, Alline Sardinha Cordeiro Morais, Sergio Neves Monteiro and Carlos Mauricio Fontes Vieira

    5. Recycling of Styrene-Divinylbenzene Copolymer through Sequential Mass-Suspension Polymerization Process (pages 395–400)

      NathalieM. Campelo, Alexandre P. Umpierre and Fabricio Machado

  10. Part IX: Waste Utilization

    1. Experimental Research on Acid Magenta Dye Decolor Dynamics (pages 401–407)

      Yunnen Chen, Lichao Ding and Chunhua Liu

    2. Recovery of Magnesium from Waste Effluent in Nickel Laterite Hydrometallurgy Process (pages 409–416)

      Ninglei Sun, Jinshan Liu, Kuiting Wang, Aiguo Dong and Yeda Lu

    3. Recycling of Reverted IN738LC with Reference to Mechanical Properties and Control of Chemical Composition (pages 417–424)

      Reza Rahimi and M. Nili Ahmadabadi

    4. A Kinetics Study on the Hydrometallurgical Recovery of Vanadium from LD Converter Slag in Alkaline Media (pages 425–433)

      Amirhossein Shahnazi, Fereshteh Rashchi and Ehsan Vahidi

  11. Part XI: Silicon Production

    1. An Investigation into the Electrochemical Production of Si by the FFC Cambridge Process (pages 451–462)

      Emre Ergü, ishak Karakaya, Metehan Erdogan and Fuat Erden

    2. Distribution of Boron and Phosphorus during Alloying and Slag Treatment of Metallurgical Grade Silicon (pages 463–470)

      Y.V. Meteleva-Fischer, Y. Yang, R. Boom, B. Kraaijveld and H. Kuntzel

    3. The Kinetics of Boron Removal during Slag Refining in the Production of Solar-Grade Silicon (pages 471–480)

      E. Krystad, S. Zhang and G. Tranell

    4. Raman Spectroscopic Study of the Structural Modifications Associated with the Addition of Calcium Oxide and Boron Oxide to Silica (pages 481–491)

      Jeff Kline, Merete Tangstad and Gabriella Tranell

    5. Structure Silicon Deposits Obtained by Electrolysis SiO2 in the Chloride-Fluoride Melts (pages 493–498)

      O. Chemezov, A. Apisarov, A. Isakov and Yu. Zaikov

  12. Part XII: Refining and Characterization

    1. High Frequency Electromagnetic Purification of Silicon (pages 499–506)

      Lucas Nana Wiredu Damoah and Lifeng Zhang

    2. Mono-Like Ingot/Wafers Made of Solar-Grade Silicon for Solar Cells Application (pages 507–511)

      Sergey Beringov, Timur Vlasenko, Sergiy Yatsuk, Oleksandr Liaskovskiy and Iryna Buchovska1

    3. Thermodynamics of Phosphorous Distribution between Si and Fe-Si in Solvent Refining of Silicon (pages 513–520)

      Leili Tafaghodi Khajavi and Mansoor Barati

    4. Imaging Techniques for the Characterization of Multi-Crystalline Silicon Bricks and Wafers (pages 521–528)

      Steve Johnston, Fei Yan, Katherine Zaunbrecher, Mowafak Al-Jassim, Omar Sidelkheir and Alain Blosse

    5. Thermodynamics on Boron Rejection during Metallurgical Grade Silicon Oxidation by Silicon Dioxide (pages 529–536)

      Yaqiong Li, Yi Tan, Jiayan Li, Shenrui Wu and Yao Liu

    6. 2D and 3D Numerical Modeling of Solidification Benchmark of Sn-3Pb (%wt.) Alloy under Natural Convection (pages 537–544)

      R. Boussaa, O. Budenkova, L. Hachani, X-D. Wang, B. Saadi, K. Zaidat, H. Ben Hadid and Y. Fautrelle

    7. You have free access to this content
      Author Index (pages 545–547)

    8. You have free access to this content
      Subject Index (pages 549–551)

SEARCH