3rd International Symposium on High-Temperature Metallurgical Processing

Copyright © 2012 The Minerals, Metals, & Materials Society. All rights reserved.

3rd International Symposium on High-Temperature Metallurgical Processing

Editor(s): Tao Jiang, Jiann-Yang Hwang, Patrick Masset, Onuralp Yucel, Rafael Padilla, Guifeng Zhou

Published Online: 15 MAY 2012 09:28AM EST

Print ISBN: 9781118291412

Online ISBN: 9781118364987

DOI: 10.1002/9781118364987

About this Book

Product Information

About The Product

Proceedings of a symposium sponsored by the Pyrometallurgy Committee and the Energy Committee of the Extraction and Processing Division of TMS (The Minerals, Metals & Materials Society)

Held during the TMS 2012 Annual Meeting & Exhibition Orlando, Florida, USA
March 11-15, 2012

Table of contents

    1. You have free access to this content
      Front Matter (pages i–xv)

  2. Part I: High Efficiency New Metallurgical Technology

    1. A Laboratory Investigation of the Reduction of the Siderite Iron Ore to Iron Nugget (pages 1–6)

      Panishev N.V., Redin E.V. and Pilshchikov V.l.

    2. Composite Agglomeration Process of Iron Fines (pages 7–15)

      Tao Jiang, Youming Hu, Guanghui Li, Yufeng Guo, Zhengwei Yu, Xiaohui Fan, Yuanbo Zhang and Yongbin Yang

    3. Investigation of Pyrometallurgical Nickel Pig Iron (NPI) Production Process from Lateritic Nickel Ores (pages 17–23)

      Onuralp Yucel, Ahmet Turan and Halil Yildirim

    4. Novel Process for Utilizing Low-Grade Manganese Oxide Ores by Sulfur-Based Reduction Roasting-Acid Leaching (pages 25–32)

      Tao Jiang, Zhixiong You, Yuanbo Zhang, Daoxian Duan and Guanghui Li

    5. Equipment for Pilot Scale Experiments of NOx Emissions from the Silicon Process (pages 33–40)

      Ingeborg Solheim, Roar Jensen and Nils Eivind Kamfjord

    6. Slide Gate Systems for Copper Tapping (pages 41–47)

      Klaus Gamweger

    7. Recovery of Huangmei Limonite by Flash Magnetic Roasting Technique (pages 49–58)

      Wen Chen, Xinghua Liu, Zeyou Peng and Qiulin Wang

    8. Studies on Alternative Blast Furnace Burden Structure with High Proportion Sinter (pages 59–66)

      Jianjun Fan, Guanzhou Qiu, Tao Jiang, Yufeng Guo, Yongbin Yang and Meixia Cai

    9. Hydrothermal Sulfidation of Carbonate-Hosted Zinc-Lead Ore with Elemental Sulfur (pages 67–74)

      Cunxiong Li, Chang Wei, Jiqiang Liao, Zhigan Deng, Hongsheng Xu, Yan Song, Xingbin Li and Minting Li

  3. Part II: Reduction and Titanium Production

    1. Preparation of Titanium Alloy from Titania-bearing Blast Furnace Slag (pages 75–83)

      Run Huang, Chenguang Bai, Xuewei Lv and Songli Liu

    2. Basic Research of Direct Pyrolysis Performance of MgCl2 in Molten State (pages 85–91)

      ZHANG Ting'an, LV Guozhi, DOU Zhihe, LIU Yan, NIU Liping, ZHAO Qiuyue and HE Jicheng

    3. Chlorination of Titania Feedstocks (pages 93–104)

      Samantha Moodley, Rauf Hurman Eric, Cevat Kucukkaragoz and Aditya Kale

    4. Experimental Study on the Pulverization and Reduction Behavior of Sinter in Oxygen Blast Furnace (pages 105–112)

      Yihua Han, Jingsong Wang, Rongzong Lan, Lintao Wang, Xiaojian Zuo and Qingguo Xue

    5. Formation of Ti(C,N) in Blast Furnace Slag Bearing High TiO2 (pages 113–120)

      Shiwei Ma, Guibao Qiu, Qingyu Deng and Wang Hua

    6. Research on Carbonthermal Reduction Behavior of Ilmenite (pages 121–128)

      Yufeng Guo, Lirong Chen, Tao Jiang, Wenjie Weng and Feng Chen

    7. Reduction Kinetics of Low Grade Hematite Ore (pages 129–135)

      Yongzhong Xiao, Zhen He, Tiejun Chun, Deqing Zhu and Jian Pan

    8. Viscosity Evolution of Blast Furnace Slag Bearing Titanium (pages 137–144)

      Hua Wang, Guibao Qiu, Qingyu Deng and Shiwei Ma

  4. Part III: Basic Research of Metallurgical Process

    1. Thermal Decomposition and Regeneration of Wüstite (pages 146–156)

      Zhiwei Peng, Jiann-Yang Hwang, Zheng Zhang, Matthew Andriese and Xiaodi Huang

    2. Competitive Precipitation and Growth of Spinel Crystals in Vanadium Slag (pages 157–164)

      Xie Zhang, Bing Xie, Jiang Diao and Xiaojun Li

    3. Expert System for Grate-Kiln Pellet Production Based on Mathematical Models of Temperature Field (pages 165–173)

      Xiaohui Fan, Yi Wang and Xuling Chen

    4. The Influence of Sodium Oxide on the Distribution Behavior of Some Elements at the S-Furnace of the Mitsubishi Process (pages 175–182)

      Yusuke Kimura and Ken-ichi Yamaguchi

    5. Effect of Temperature on Equilibrium Phase Relation and Liquidus of CaO-SiO2-Al2O3-FeOx System (pages 183–188)

      Nan Wang, Zongshu Zou, Z. Zhang, Y. Xiao and Y. Yang

    6. Viscosity Determination of the Freeze Slag in Reaction Shaft of Flash Smelting Furnace (pages 189–195)

      Jinliang Wang, Yanxin Wu, Liwei Liang and Chuanfu Zhang

    7. Effect of MgO Content on Melting Features and Viscosity of SiO2-CaO-MgO-Al2O3-FeO Slag in Nickel Laterite Metallurgy (pages 197–201)

      Xuewei Lv, Cheng Pan, Chenguang Bai, Guibao Qiu and Meilong Hu

    8. Influence of Silicon Content in Hot Metal on Mineralogical Characterization and Physico-chemical Properties of Vanadium Slag (pages 203–210)

      Chongyang Zhao, Bing Xie, Qingyun Huang, Xiaopeng Zhen and Xie Zhang

    9. Analysis of Influence Factors on the Melting Point of the Freeze Slag Inside Flash Smelting Furnace Brickless Reaction Shaft (pages 211–217)

      Jinliang Wang and Chuanfu Zhang

  5. Part IV: Alloy and Materials Preparation

    1. Improving Hot Workability of Ledeburitic Tool Steels (pages 218–228)

      M. Fazarinc, G. Kugler, I. Perus and M. Tercelj

    2. Influence of Elements Segregation on Creep Properties of a Single Crystal Nickel-Based Superalloy (pages 229–236)

      ZHANG chao, TIAN Su-gui, YU Xing-ru, ZENG Zheng and LIU Chen

    3. Preparation of Titanium Ferrous Alloys with Low Oxygen Content Prepared by Reduction-SHS (pages 237–242)

      Zhang Ting-an, Dou Zhihe, Zhang Hanbo, Zhang Zhiqi, Niu Liping and He Jicheng

    4. Preparing Aluminum-Scandium Alloys Using Direct Hall Reduction Process (pages 243–250)

      Chunyang Guan, Jilai Xue, Jun Zhu and Qiaochu Liu

    5. Production of NbAl3 Powders through Sodium Reduction of Oxides in Molten Salts (pages 251–256)

      Chao Du, Na Wang, Yao Zhang Shuqiang Jiao and Hongmin Zhu

    6. Recrystallization of L-605 Cobalt Superalloy during Hot-Working Process (pages 257–264)

      TMS, Julien Favre, Yuichiro Koizumi, Akihiko Chiba, Damien Fabregue and Eric Maire

    7. Research on Inclusions in CUCR Alloy Prepared by Thermit Reduction (pages 265–270)

      DOU Zhihe, ZHANG Ting'an, ZHANG Zhiqi, NIU Liping, LV Guozhi, LIU Yan and HE Jicheng

    8. Settling of Inclusions in Top-cut Solar Grade Silicon SOG-Si Scraps under Electromagnetic Field (pages 271–278)

      Lucas Nana Wiredu Damoah and Lifeng Zhang

    9. Study and Application of the Taphole Clay with High Strength and Environment-friendly in a New Blast Furnace with 3800M3 Volume (pages 279–287)

      Guotao Xu, Huaiyuan Li, Yafei Xiong, Yue Wang and Shuzhong Li

  6. Part V: Sintering and Synthesis

    1. Strengthening the Sintering of Iron Concentrate Fines by High Pressure Roller Grinding Pretreatment (pages 288–297)

      Yufeng Guo, Kelang Mu, Tao Jiang, Dao Su and Jinghua Zeng

    2. Research on Sintering Properties of Vanadium-Titanum Magnetite Concentrate (pages 299–305)

      Xiaohui Fan, Qiang Wang, Xuling Chen, Min Gan, Lishun Yuan and Shan He

    3. Influence of Limonite Proportion on Sinter Quantity and Quality (pages 307–314)

      Xiaohui Fan, Dao Su, Ganghua Fu, Xuling Chen, Min Gan, Tao Jiang and Yufeng Guo

    4. In Situ Observation of High Temperature Properties of Iron Ore during Sintering Process (pages 315–321)

      Minge Zhao, Yuandong Pei, Zhixing Zhao, Lili Ban and Zejun Ma

    5. Air Leakage Online Monitoring and Diagnosis Model for Sintering (pages 323–329)

      FAN Xiao-Hui, JIANG Li-Juan and CHEN Xu-Ling

    6. Investigation on the Interfaces of M42/45 Steel Bimetal Composites Sintered by Spark Plasma Sintering (pages 331–336)

      Jinru Xu, Hang You, Peng Jiang, Yuting Lv and Youqing Cao

  7. Part VI: Energy and Environment

    1. Current Status of Heat Recovery from Granulated Slag (pages 337–348)

      Shaghayegh Esfahani and Mansoor Barati

    2. Contribution to the Energy Optimization in the Pyrometallurgical Treatment of Greek Nickeliferous Laterites (pages 349–356)

      K. Karalis, C. Zografidis, A. Xenidis, S. Tabouris and E. Devlin

    3. Strengthening Refractory Iron Ore Sintering with Biomass Fuel (pages 357–364)

      Xiaohui Fan, Zhiyun Ji, Min Gan, Xuling Chen, Wenqi Li and Zhiyuan Yu

    4. Combustion Behavior of Pulverized Coal Injection in Corex Melter Gasifier (pages 365–372)

      Shengfii Zhang, Feng Zhu, Chenguang Bai, Liangying Wen, Guibao Qiu, Xuewei Lv, Meilong Hu and Yuelin Qin

    5. Improved Short Coil Correction Factor for Induction Heating of Billets (pages 373–382)

      Mark William Kennedy, Shahid Akhtar, Jon Arne Bakken and Ragnhild E. Aune

    6. Liberation of Metallic-Bearing Minerals from Host Rock Using Microwave Energy (pages 383–390)

      Matthew D. Andriese, Jiann-Yang Hwang and Zhiwei Peng

    7. Effects of Binders Additives on Compressive Strength of Hematite Pellets in Firing Process (pages 391–399)

      Yanfang Huang, Guihong Han, Tao Jiang, Guanghui Li, Yuanbo Zhang and Dan Wang

    8. Mechanisms of NO Formation during SiO Combustion (pages 401–409)

      Nils Eivind Kamfjord, Harvard Tveit, Man K Naess and Edin H. Myrhaug

    9. Pilot Scale Measurements of NO Emissions from the Silicon Process (pages 411–418)

      Nils Eivind Kamfjord, Harvard Tveit and Ingeborg Solheim

  8. Part VII: Treatment and Recycling of Solid Slag/Wastes

    1. An Integrated Strategy for Whole Ecological Utilization of Typical Industrial Solid Wastes in China (pages 419–428)

      He Yang, Xiangxin Xue, Tao Jiang and Yong Li

    2. Chlorination Behaviors of Copper Phases by Calcium Chloride in High Temperature Oxidizing-Chloridizing Roasting (pages 429–437)

      Deqing Zhu, Dong Chen, Jian Pan, Tiejun Chun, Guolin Zheng and Xianlin Zhou

    3. Effect of Iron Containing Metallurgical Byproducts on Pulverized Coal Combustion Efficiency (pages 439–446)

      ZOU Chong, WEN Liangying, ZHANG Shengfu, BAI Chenguang and TAN Xiuqin

    4. Effect of SiO2 Addition on Production of Fe-Si-Mn Alloy from Adjusted Converter Slag (pages 447–451)

      Min Chen, Jian-hong Dong, Zhen Tian and Cui-huan Huang

    5. Solidification of EAF Stainless Steel Dust (pages 453–460)

      Bing. Peng, Ji Peng, Liyuan Chai and Di Yu

    6. Study on Cementing Material Making with Electrolytic Manganese Residue (pages 461–471)

      Jia Wang, Bing Peng, Liyuan Chai, Qiang Zhang and Qin Liu

    7. Study on the Desulfuration of Pyrite Cinder Pellets (pages 473–479)

      Zhiyong RUAN, Deqing ZHU, Tiejun CHUN and Jian PAN

  9. Part VIII: Pelletizing and Raw Materials Processing

    1. Effects of Sodium Salts-Modified Paigeite on Dephosphorization of High-Phosphorus Oolitic Hematite during Reduction (pages 480–490)

      Guanghui Li, Ting Lei, Mingjun Rao and Tao Jiang

    2. Study of Certain Parameters in Laboratory-Scale Smelting of Sivrihisar Laterite Ores of Turkey (pages 491–498)

      Ender Keskinkilic, Saeid Pournaderi, Ahmet Geveci and Yavuz A. Topkaya

    3. Effect of Basicity and MgO on the Pelletzing of Specularite Concentrate (pages 499–505)

      Deqing Zhu, Jinliang Zhang and Jian Pan

    4. Effects of MHA Binder on Roasting Behaviors of Oxidized Pellets from Specularite Concentrate (pages 507–514)

      Youlian Zhou, Yuanbo Zhang, Tao Jiang, Guanghui Li and Daoyuan Zhang

    5. A Study of Carbon-Burdened and Cold-Bonded Pelletizing-Electrosmelting Process Disposing Low-Grade Manganese Ore (pages 515–521)

      Zhao Qiang, Ning Shun-ming, Chen Wen, Tang Sanchuan, Li Zhaojia and Wang Hong-qiang

    6. You have free access to this content
      Author Index (pages 523–525)

    7. You have free access to this content
      Subject Index (pages 527–529)

SEARCH