Superalloy 718 and Derivatives

Copyright © 2010 by The Minerals, Metals, & Materials Society. All rights reserved.

Superalloy 718 and Derivatives

Editor(s): E.A. Ott, J.R. Groh, A. Banik, I. Dempster, T.P. Gabb, R. Helmink, X. Liu, A. Mitchell, G.P. Sjöberg, A. Wusatowska-Sarnek

Published Online: 17 AUG 2012 08:56AM EST

Print ISBN: 9780470943168

Online ISBN: 9781118495223

DOI: 10.1002/9781118495223

About this Book

Product Information

About The Product

Table of contents

    1. You have free access to this content
      Front Matter (pages i–xi)

    2. Introducing New Materials into Aero Engines-Risks and Rewards, A Users Perspective (pages 3–11)

      Malcolm Thomas, Susan Murray and David Furrer

    3. Superalloys, the Most Successful Alloy System of Modern Times-Past, Present, and Future (pages 13–50)

      Art Kracke

    4. An Overview of SMPC Research Programs to Improve Remelt Ingot Quality (pages 53–63)

      Rodney L. Williamson

    5. Considering the Solidification Structure of VAR Ingots in the Numerical Simulation of the Cogging Process (pages 64–77)

      Jan Terhaar, Jörg Poppenhäger, Dieter Bokelmann, Hendrik Schafstall and Kanchan Kelkar

    6. Solidification Front Tilt Angle Effect on Potential Nucleation Sites for Freckling in the Remelt of Ni-Base Superalloys (pages 78–94)

      Jairo Valdes, Xingbo Liu, Paul King, Christopher Cowen and Paul Jablonski

    7. Assessment of Test Methods for Freckle Formation in Ni-base Superalloy Ingot (pages 95–106)

      Koji Kajikawa, Masaru Tanaka, Shigeru Suzuki and Hitohisa Yamada

    8. Quantitative Characterization of Two-Stage Homogenization Treatment of Alloy 718 (pages 107–115)

      Zhujun Miao, Aidang Shan, Wei Wang, Jun Lu, Wenliang Xu and Hongwei Song

    9. Casting Superalloys for Structural Applications (pages 116–130)

      Göran Sjöberg

    10. Castability of 718Plus(®) Alloy for Structural Gas Turbine Engine Components (pages 131–146)

      Benjamin Peterson, Venkatesh Krishnan, Dave Brayshaw, Randy Helmink, Scott Oppenheimer, Eric Ott, Ray Benn and Michael Uchic

    11. Selection of Heat Treatment Parameters for a Cast Allvac 718Plus(®) Alloy (pages 147–160)

      Oscar Caballero, Kepa Celaya, Tomás Gomez-Acebo and Antonio Julio Lopez

    12. Primary Carbides in Alloy 718 (pages 161–167)

      A. Mitchell

    13. Application of Confocal Scanning Laser Microscope in Studying Solidification Behavior of Alloy 718 (pages 168–180)

      Hongwei Song, Zhujun Miao, Aidang Shan, Wenliang Xu and Jun Lu

    14. Effect of Process Modeling on Product Quality of Superalloy Forgings (pages 181–197)

      Martin Stockinger, Martin Riedler and Daniel Huber

    15. Influence of Both γ′ Distribution and Grain Size on the Tensile Properties of UDIMET 720Li At Room Temperature (pages 198–213)

      Jean-Roch Vaunois, Jonathan Cormier, Patrick Villechaise, Alexandre Devaux and Benjamin Flageolet

    16. Effect of Compound Jacketing Rolling on Microstructure and Mechanical Properties of Superalloy GH4720Li (pages 214–221)

      Jinglong Qu, Minqing Wang, Jianxin Dong, Guilin Wu and Ji Zhang

    17. Properties of New C&W Superalloys for High Temperature Disk Applications (pages 222–235)

      Alexandre Devaux, Eric Georges and Philippe Héritier

    18. Manufacture and Property Evaluation of Super Alloy 44Ni-14Cr-1.8Nb-1.7Ti-1.5Mo-0.3V-Fe (Modified 706)–an Experience (pages 236–242)

      U V Gururaja, P Sarkar and M Narayana Rao

    19. Grain Boundary Engineering of Allvac 718Plus(®) for Aerospace Engine Applications (pages 243–253)

      Peter Lin, Virgil Provenzano, Gino Palumbo, Tim Gabb and Jack Telesman

    20. Grain Boundary Engineering the Mechanical Properties of Allvac 718Plus™ Superalloy (pages 254–269)

      T. P. Gabb, J. Telesman, A. Garg, P. Lin, V. Provenzano, R. Heard and H. M. Miller

    21. An Advanced Cast/Wrought Technology for GH720Li Alloy Disk from Fine Grain Ingot (pages 270–280)

      Yuxin Zhao, Shuhong Fu, Shaowei Zhang, Xin Tang, Na Liu and Guoqing Zhang

    22. Research on Inconel 718 Type Alloys with Improvement of Temperature Capability (pages 281–296)

      Shuhong Fu, Jianxin Dong, Maicang Zhang, Ning Wang and Xishan Xie

    23. FE Simulation of Microstructure Evolution during Ring Rolling Process of INCONEL Alloy 783 (pages 297–305)

      Jong-Taek Yeom, Eun-Jeoung Jung, Jeoung Han Kim, Jae-Keun Hong, Nho-Kwang Park, Kook-Joo Kim, Jin-Mo Lee and Seung-Sik Choi

    24. Effect of Temperature and Strain during Forging on Subsequent Delta Phase Precipitation during Solution Annealing in ATI 718Plus(®) Alloy (pages 306–319)

      Erin McDevitt

    25. Toughness as a Function of Thermo-Mechanical Processing and Heat Treatment in 718Plus(®) Superalloy (pages 320–330)

      Scott Oppenheimer, Erin McDevitt and Wei-Di Cao

    26. Modeling the Hot Forging of Nickel-Based Superalloys: IN718 and Alloy 718Plus(®) (pages 331–342)

      Esteban B. Marin, Douglas J. Bammann, Arthur Brown, Haitham El Kadiri, R. Daniel Costley, Paul T. Wang and Mark F. Horstemeyer

    27. The Microstructure and Mechanical Properties of Inconel 718 Fine Grain Ring Forging (pages 343–349)

      Zixing Wang, Dianhua Zhou, Qun Deng, Guosheng Chen and Wei Xie

    28. Numerical Simulation of Hot Die Forging for IN 718 Disc (pages 350–361)

      X.D. Lu, J.H. Du, Q. Deng, G.S. Chen and X.F. Liu

    29. The Effects of Process-Route Variations on the Tensile Properties of Closed-Die Waspaloy Forgings, via Statistical Modeling Techniques (pages 362–370)

      A.O. Latinwo, B.P Wynne and W. M. Rainforth

    30. Microstructure and Properties of Fine Grain IN718 Alloy Bar Products Produced by Continuous Rolling (pages 971–981)

      Guosheng Chen, Qingzeng Wang, Fengjun Liu, Zixing Wang, Jianxin Dong and Xishan Xie

    31. Effect of Thermomechanical Working on the Microstructure and Mechanical Properties of Hot Pressed Superalloy Inconel 718 (pages 382–396)

      Andrzej Nowotnik and Jan Sieniawski

    32. An Overview of Ni Base Additive Fabrication Technologies for Aerospace Applications (pages 397–412)

      Christopher L. English, Sudhir K. Tewari and David H. Abbott

    33. Linear Friction Welding of Allvac(®) 718Plus(®) Superalloy (pages 413–426)

      K.R. Vishwakarma, O.A. Ojo, P. Wanjara and M.C. Chaturvedi

    34. Transient Liquid Phase Bonding of Newly Developed HAYNES 282 Superalloy (pages 427–438)

      A. Ghoneim and O. A. Ojo

    35. Investigation of Homogenization and its Influence on the Repair Welding of Cast Allvac 718Plus(®) (pages 439–454)

      Joel Andersson, Göran Sjöberg and Josefin Larsson

    36. Additively Manufactured INCONEL(®) Alloy 718 (pages 455–469)

      Raymond C. Benn and Randy P. Salva

    37. Simulations of Temperatures, Residual Stresses, and Porosity Measurements in Spray Formed Super Alloys Tubes (pages 470–485)

      Reinhard Ristau, Andreas Becker, Volker Uhlenwinkel and Reinhold Kienzler

    38. Flowforming of a Nickel Based Superalloy (pages 486–498)

      Shawn Rhodes, Juan Valencia, John Ryan, Steven Stawarz and Christopher Humiston

    39. Clad Stainless Steels and High-Ni-Alloys for Welded Tube Application (pages 499–508)

      Wolfgang Bretz

    40. Improved Superalloy Grinding Performance with Novel CBN Crystals (pages 509–517)

      Sridhar Kompella and Kai Zhang

    41. Additive Manufacturing for Superalloys–Producibility and Cost (pages 521–537)

      James Moor, Andrew Debiccari, Benjamin Lagow, Sudhir Tewari and Mary Kinsella

    42. Hot Ductility Study of HAYNES(®) 282(®) Superalloy (pages 538–554)

      Joel Andersson, Göran Sjöberg and Mahesh Chaturvedi

    43. The Creep and Fatigue Behavior of Haynes 282 at Elevated Temperatures (pages 555–557)

      Sara C. Longanbach and Carl J. Boehlert

    44. Effect of Microstructure on the High Temperature Fatigue Properties of Two Ni-based Superalloys (pages 558–567)

      G. Muralidharan, Rick Battiste, Edward A. Kenik, James Bentley and Bruce G. Bunting

    45. Numerical Simulation of the Simultaneous Precipitation of δ and γ′ Phases in the Ni-Base Superalloy ATI Allvac®718Plus™ (pages 568–578)

      Rene Radis, Gerald A. Zickler, Martin Stockinger, Christof Sommitsch and Ernst Kozeschnik

    46. Alloy 718 for Oilfield Applications (pages 579–593)

      J.J. deBarbadillo and S.K. Mannan

    47. Characterization of Microstructures Containing Abnormal Grain Growth Zones in Alloy 718 (pages 594–606)

      Benjamin Flageolet, O. Yousfi, Y. Dahan, P. Villechaise and J. Cormier

    48. A TEM Study of Creep Deformation Mechanisms in Allvac 718Plus (pages 607–615)

      Raymond R. Unocic, Kinga A. Unocic, Robert W. Hayes, Glenn S. Daehn and Michael J. Mills

    49. Effects of Al and Ti on Haynes 282 with Fixed Gamma Prime Content (pages 616–628)

      Paul D. Jablonski, Christopher J. Cowen and Jeffery A. Hawk

    50. Time-Temperature-Transformation Diagram of Alloy 945 (pages 629–643)

      Sarwan Mannan

    51. Long Term Thermal Exposure of HAYNES 282 Alloy (pages 644–660)

      L. M. Pike

    52. Modeling and Simulation of Alloy 718 Microstructure and Mechanical Properties (pages 661–677)

      David Furrer, Robert Goetz and Gangshu Shen

    53. Aging Effects on the γ′ and γ″ Precipitates of Inconel 718 Superalloy (pages 678–688)

      Hui-Yun Bor, Chao-Nan Wei, Huu Tri Nguyen, An-Chou Yeh and Chen-Ming Kuo

    54. Overview on 718Plus(®) Assessment within “VITAL” Project (pages 689–704)

      Oscar Caballero Ruiz, Göran Sjöberg and Tomás Gómez-Acebo

    55. Hold-Time Fatigue Crack Growth of Allvac 718Plus (pages 705–717)

      Magnus Hörnqvist, Leif Viskari, Krystyna Stiller and Göran Sjöberg

    56. Atomic-Level Characterization of Grain-Boundary Segregation and Elemental Site-Location in Ni-Base Superalloy by Aberration-Corrected Scanning Transmission Electron Microscopy (pages 718–723)

      Masashi Watanabe

    57. Effect of Nickel Content on Delta Solvus Temperature and Mechanical Properties of Alloy 718 (pages 724–736)

      Richard B. Frank, Christopher G. Roberts and Jingxian Zhang

    58. Evolution of δ Phase Microstructure in Alloy 718 (pages 737–750)

      Sundararaman Mahadevan, Sachin Nalawade, Jung Bahadur Singh, Amit Verma, Bhaskar Paul and Kishore Ramaswamy

    59. An Integrated Approach to Relate Hot Forging Process Controlled Microstructure of IN718 Aerospace Components to Fatigue Life (pages 751–765)

      Michael Stoschka, Martin Riedler, Martin Stockinger, Hermann Maderbacher and Wilfried Eichlseder

    60. The Effect of Primary γ′ Distribution on Grain Growth Behavior of GH720Li Alloy (pages 766–779)

      Maicang Zhang, Jianxin Dong, Zhongnan Bi, Qiuying Yu and Yuchun Zhang

    61. Systematic Evaluation of Microstructural Effects on the Mechanical Properties of ATI 718Plus(®) Alloy (pages 780–797)

      R.M. Kearsey, J. Tsang, P. Au, S. Oppenheimer and E. McDevitt

    62. Microstructural Evolution of ATI 718Plus Contoured Rings When Exposed to Heat Treatment Procedures (pages 798–807)

      Octavio Covarrubias

    63. Serrated Yielding in Alloy 718 (pages 808–823)

      Sachin Nalawade, Sundararaman Mahadevan, Jung Bahadur Singh, Kishore Ramaswamy and Amit Verma

    64. Effect of Serrated Grain Boundaries on the Creep Property of Inconel 718 Superalloy (pages 824–835)

      An-Chou Yeh, Kang-Wei Lu, Chen-Ming Kuo, Hui-Yun Bor and Chao-Nan Wei

    65. Influence of B and Zr on Microstructure and Mechanical Properties of Alloy 718 (pages 836–846)

      T. Fedorova, J. Rösler, B. Gehrmann and J. Klöwer

    66. Structure-Property Relationships in Waspaloy via Small Angle Scattering and Electrical Resistivity Measurements (pages 847–858)

      Ricky L. Whelchel, Rosario A. Gerhardt and Ken Littrell

    67. Oxidation of Superalloys in Extreme Environments (pages 859–875)

      B. A. Pint, S. Dryepondt and K. A. Unocic

    68. Microstructure Evolution in the Nickel Base Superalloy Allvac®718Plus™ (pages 876–891)

      K. Löhnert and F. Pyczak

    69. Effect of the LCF Loading Cycle Characteristics on the Fatigue Life of Inconel 718 at High Temperature (pages 892–905)

      F. Taina, M. Pasqualon, V. Velay, D. Delagnes and P. Lours

    70. Machining Conditions Impact on the Fatigue Life of Waspaloy–Impact of Grain Size (pages 906–922)

      Nihad Ben Salah and Serafettin Engin

    71. Oil-Grade Alloy 718 in Oil Field Drilling Applications (pages 923–932)

      Jing Xu, Hendrik John, Gabriela Wiese and Xingbo Liu

    72. On the Influence of Temperature on Hydrogen Embritllement Susceptibility of Alloy 718 (pages 933–945)

      Florian Galliano, Benoit Ter-Ovanessian, Eric Andrieu, Jean-Marc Cloué, Christine Baret-Blanc and Grégory Odemer

    73. Cast Alloys for Advanced Ultra Supercritical Steam Turbines (pages 946–960)

      Gordon R. Holcomb, Paul D. Jablonski and Ping Wang

    74. Effect of Phosphorus on Microstructure and Mechanical Properties of IN718 Alloy after Hot Corrosion and Oxidation (pages 961–976)

      Z. Q. Hu, X. M. Lou, W. R. Sun, L. X. Yu, S. L. Yang and W. H. Zhang

    75. Effect of Microstucture and Environment on the High-Temperature Oxidation Behavior of Alloy 718Plus (pages 977–991)

      Kinga A. Unocic, Raymond R. Unocic, Bruce A. Pint and Robert W. Hayes

    76. Surface Modification of Inconel 718 Superalloy by Plasma Immersion Ion Implantation (pages 992–1001)

      A.C.O. Hirschmann, M.M. Silva, C. Moura Neto, M. Ueda, C.B. Mello, M.J.R. Barboza and A. A. Couto

    77. You have free access to this content
      Author Index (pages 1002–1004)

    78. You have free access to this content
      Subject Index (pages 1005–1007)

    79. You have free access to this content
      Alloys Index (page 1008)

SEARCH