ICAA13: 13th International Conference on Aluminum Alloys

ICAA13: 13th International Conference on Aluminum Alloys

Editor(s): Hasso Weiland, Anthony D. Rollett, William A. Cassada

Published Online: 4 SEP 2012 09:58AM EST

Print ISBN: 9781118458044

Online ISBN: 9781118495292

DOI: 10.1002/9781118495292

About this Book

This CD contains a collection of papers presented at the 13th International Conference on Aluminum Alloys (ICAA-13), the premier global conference for exchanging emerging knowledge on the structure and properties of aluminum materials. Held in Pittsburgh, Pennsylvania June 3-7, 2012, the papers on the CD are organized around the topics of the science of aluminum alloy design for a range of market applications; the accurate prediction of material properties; novel aluminum products and processes; and emerging developments in recycling and applications using both monolithic and multi-material solutions.

Table of contents

    1. You have free access to this content
    2. Aberration-Corrected STEM Study of Precipitates in an Al-Mg-Si-Ge-Cu Alloy (pages 3–8)

      Ruben Bjørge, Sigmund J. Andersen, Calin D. Marioara, Joanne Etheridge and Randi Holmestad

    3. Diffraction-Amalgamated Grain-Boundary Tracking (DAGT) Technique and Its Application to an Aluminium Alloy (pages 9–14)

      Darren J. LeClere, Takanobu Kamiko, Yasuharu Mizuseki, Yoshio Suzuki, Akihisa Takeuchi, Kentaro Uesugi, Masakazu Kobayashi and Hiroyuki Toda

    4. Improvement in the Characterization of the 2099 Al-Li Alloy by Fe-SEM (pages 23–28)

      Nicolas Brodusch, Michel L. Trudeau, Pierre Michaud, Mathieu Brochu, Lisa Rodrigue, Julien Boselli and Raynald Gauvin

    5. Muon Spin Relaxation and Positron Annihilation Spectroscopy Studies of Natural Aging in Al–Mg–Si Alloys (pages 37–42)

      Sigurd Wenner, Kenji Matsuda, Katsuhiko Nishimura, John Banhart, Teiichiro Matsuzaki, Dai Tomono, Francis L. Pratt, Meng Liu, Yong Yan, Calin D. Marioara and Randi Holmestad

    6. The Effect of Nickel on the Thermal Conductivity of Al-Si Cast Alloys (pages 137–142)

      Florian Stadler, Helmut Antrekowitsch, Werner Fragner, Helmut Kaufmann and Peter J. Uggowitzer

    7. Single Roll Caster to Cast Aluminum Alloy Strip (pages 157–162)

      Toshio Haga, Kazuya Akitsu, Keisuke Kamakura, Shinji Kumai and Hisaki Watari

    8. Roll Caster to Cast Clad Strip (pages 163–168)

      Toshio Haga, Hiroshi Tsuge, Takuya Ishihar, Shinji Kumai and Hisaki Watari

    9. Effect of Mn on the Interaction between Die Casting Steel and Al Alloy (pages 225–229)

      Se-Weon Choi, Young-Chan Kim, Cheol-Woo Kim, Jae-Ik Cho, Chang-Seog Kang, Yu-Mi Kim and Sung-Kil Hong

    10. Limitation of Shrinkage Porosity in Aluminum Rotor Die Casting (pages 231–236)

      Young-Chan Kim, Se-Weon Choi, Cheol-Woo Kim, Jae-Ik Cho, Sung-Ho Lee and Chang-Seog Kang

    11. Initial Studies of 6082 Aluminium Thin Films (pages 245–250)

      Jon Holmestad, Øystein Dahl, Sigmund J. Andersen, Oddvin Reiso, Randi Holmestad and John C. Walmsley

    12. Fatigue Crack Growth Behavior of 2099-T83 Extrusions in Two Different Environments (pages 517–522)

      Franck Armel Tchitembo Goma, Daniel Larouche, Alexandre Bois-Brochu, Carls Blais, Julien Boselli and Mathieu Brochu

    13. Influence of Microstructure on the Fretting Resistance of Al-Cu-Li Alloys (pages 523–528)

      Jessica Delacroix, Sophie Cazottes, Armelle Daniélou, Siegfried Fouvry and Jean-Yves Buffiere

    14. Origin of Ductile Fracture in Aluminum Alloys (pages 565–570)

      Hiroyuki Toda, Hideyuki Oogo, Hideki Tsuruta, Keitaro Horikawa, Kentaro Uesugi, Akihisa Takeuchi, Yoshio Suzuki and Masakazu Kobayashi

    15. Microstructure and Mechanical Properties of Friction Stir Welded Aluminum Alloy/Stainless Steel Lap Joints (pages 647–652)

      Tomo Ogura, Taichi Nishida, Hidehito Nishida, Syuhei Yoshikawa, Takumi Yoshida, Noriko Omichi, Mitsuo Fujimoto and Akio Hirose

    16. Hardening Potential of an Al-Cu-Li Friction Stir Weld (pages 659–664)

      Rosen Ivanov, Julien Boselli, Diana Denzer, Daniel Larouche, Raynald Gauvin and Mathieu Brochu

    17. Finite Element Peen Forming Simulation (pages 681–686)

      Alexandre Gariépy, Simon Larose, Claude Perron, Philippe Bocher and Martin Lévesque

    18. Effect of Additional Element on Hybrid Laser Weldability in Al-Mn Alloys (pages 783–788)

      Kenta Suzuki, Hisashi Hori, Keiji Kanamori, Kazumitsu Mizushima, Junichi Kinoshita and Tooru Murata

    19. Influences on Arc Stability in Welding of Aluminum Pin-Structures (pages 795–800)

      Lukas Wittwer, Nasrin Jank, Almedin Bećirović, Andreas Waldhör and Norbert Enzinger

    20. Multiscale Characterization and Mechanical Modelling of an Al-Zn-Mg Electron Beam Weld (pages 801–806)

      Quentin Puydt, Sylvain Flouriot, Sylvain Ringeval, Guillaume Parry, Frédéric De Geuser and Alexis Deschamps

    21. Predicting Hot Deformation of AA5182 Sheet (pages 903–908)

      John T. Lee, Alexander J. Carpenter, Jakub P. Jodlowski and Eric M. Taleff

    22. Examination of Buckling Behavior of Thin-Walled Al-Mg-Si Alloy Extrusions (pages 909–914)

      Athanasios Vazdirvanidis, Ioanna Koumarioti, George Pantazopoulos, Andreas Rikos, Anagnostis Toulfatzis, Protesilaos Kostazos and Dimitrios Manolakos

    23. ALUHAB - The Superior Aluminium Foam (pages 1005–1010)

      N. Babcsan, S. Beke, P. Makk, P. Soki, Gy Számel, H.P. Degischer and R. Mokso

    24. Powder Metallurgy of High Strength Al90.4Gd4.4Ni4.3Co0.9 Gas-atomized Powder (pages 1017–1022)

      K. G. Prashanth, K. B. Surreddi, S. Scudino, M. Samadi Khoshkhoo, Z. Wang, D. J. Sordelet and J. Eckert

    25. Solute Distribution and Mechanical Properties of Ultra-Fine-Grained Al-Mg Alloys (pages 1033–1038)

      Richard A. Karnesky, Nancy Y. C. Yang, Chris San Marchi, Troy D. Topping, Zhiui Zhang, Ying Li and Enrique J. Lavernia

    26. Age-hardening Behavior of MgB2 Particle Dispersed Al Alloy Composite Materials (pages 1039–1042)

      Chihaya Kawamoto, Kenji Matsuda, Satoshi Murakami, Daisuke Tokai, Tokimasa Kawabata, Yasuhiro Uetani and Susumu Ikeno

    27. Precipitation Morphology in Al-Mg-Si-Sc-Zr Hot-Rolled Sheet (pages 1181–1185)

      Ken-ichi Ikeda, Ryutaro Akiyoshi, Takuya Takashita, Masatoshi Mitsuhara, Satoshi Hata, Hideharu Nakashima, Kazuhiro Yamada and Kenji Kaneko

    28. Precipitation Morphology and Tensile Properties of Al-0.62Mg-0.32Si Alloy Aged at Low Temperature (pages 1229–1234)

      Ryutaro Akiyoshi, Ken-ichi Ikeda, Masatoshi Mitsuhara, Satoshi Hata, Hideharu Nakashima, Ken Takata, Makoto Saga, Kohsaku Ushioda, Kenji Kaneko and Masao Kikuchi

    29. Age-Hardening Behavior of Al-Mg2Si Alloys with Different Mn or Fe Contents (pages 1241–1244)

      Shumei Wang, Shanshan Chen, Tokimasa Kawabata, Susumu Ikeno, Hidetoshi Takagi, Koji Kawakita and Kenji Matsuda

    30. TEM Observation of Precipitates in Ag-Added Al-Mg-Si Alloys (pages 1251–1254)

      Takeshi Nagai, Kenji Matsuda, Junya Nakamura, Tokimasa Kawabata, Calin Marioara, Sigmund J. Andersen, Randi Holmestad, Shoichi Hirosawa, Zenji Horita, Daisuke Terada and Susumu Ikeno

    31. Effect of Ag and Cu Contents on the Age Hardening Behavior of Al-Zn-Mg Alloys (pages 1255–1258)

      Katsumi Watanabe, Tokimasa Kawabata, Susumu Ikeno, Tomoo Yoshida, Satoshi Murakami and Kenji Matsuda

    32. Effect of Cu or Ag Addition on Tensile Deformation in Al-Zn-Mg Alloys (pages 1259–1261)

      Naoya Miura, Katsumi Watanabe, Tokimasa Kawabata, Yasuhiro Uetani, Susumu Ikeno, Tomoo Yoshida, Satoshi Murakami and Kenji Matsuda

    33. Effect of Cu or Ag Addition on Two-Step Aging Al-Mg-Si Alloy (pages 1267–1270)

      Yoshihisa. Oe, Kenji. Matsuda, Momoko. Tokuda, Takeshi. Nagai, Tokimasa. Kawabata and Susumu. Ikeno

    34. Influence of Silicon Addition on Precipitation Behavior in an Al-Cu-Mg Alloy (pages 1289–1294)

      Xiwu Li, Baiqing Xiong, Yongan Zhang, Feng Wang, Yanqi Zeng, Zhihui Li, Baohong Zhu and Hongwei Liu

    35. Hot Extrusion of Aluminum Chips (pages 1559–1573)

      A. Erman Tekkaya, Volkan Güley, Matthias Haase and Andreas Jäger

    36. Process Analysis of the Co-Extrusion of Aluminum and Titanium Alloys (pages 1671–1677)

      N. Grittner, B. Striewe, D. Dietrich, A. von Hehl, C. Klose, M. Schaper, H.-W. Zoch and Fr.-W. Bach

    37. Rheo-Extrusion of Hypoeutectic Al-Si-Mg-Fe Alloy (pages 1678–1684)

      Yasuhiro Uetani, Nanako Mori, Masayoshi Dohi, Kenji Matsuda and Susumu Ikeno

    38. You have free access to this content
    39. You have free access to this content