Advances in Materials Science for Environmental and Energy Technologies: Ceramic Transactions, Volume 236

Copyright © 2012 The American Ceramic Society. All rights reserved.

Advances in Materials Science for Environmental and Energy Technologies: Ceramic Transactions, Volume 236

Editor(s): Tatsuki Ohji, Mrityunjay Singh, Elizabeth Hoffman, Matthew Seabaugh, Z. Gary Yang

Published Online: 7 NOV 2012 01:18PM EST

Print ISBN: 9781118273425

Online ISBN: 9781118511435

DOI: 10.1002/9781118511435

About this Book

Product Information

About The Product

With contributed papers from the 2011 Materials Science and Technology symposia, this is a useful one-stop resource for understanding the most important issues in advances in materials science for environmental and energy technologies. Logically organized and carefully selected, the articles cover the themes of the symposia: Green Technologies for Materials Manufacturing and Processing; Materials Science Challenges for Nuclear Applications; Materials for Nuclear Waste Disposal and Environmental Cleanup; Energy Conversion/Fuel Cells; and Energy Storage: Materials, Systems and Applications.

Table of contents

    1. You have free access to this content
      Front Matter (pages i–ix)

  2. Part I: Green Technologies for Materials Manufacturing and Processing

    1. Mesoporous Materials For Sorption of Actinides (pages 1–11)

      Allen W. Apblett and Zeid Al-Othman

    2. Environmentally Friendly Tin Oxide Coating through Aqueous Solution Process (pages 13–23)

      Yoshitake Masuda, Tatsuki Ohji and Kazumi Kato

    3. Investigation of the Morphological Change into the Fabrication of ZnO Microtubes and Microrods by a Simple Liquid Process using Zn Layered Hydroxide Precursor (pages 25–31)

      Seiji Yamashita, M. Fuji, C. Takai and T. Shirai

    4. Fabrication of Solid Electrolyte Dendrites through Novel Smart Processing (pages 33–39)

      Soshu Kirihara, Satoko Tasaki, Hiroya Abe, Katsuya Noritake and Naoki Komori

    5. Microstructural and Mechanical Properties of the Extruded α-β Duplex Phase Brass Cu-40Zn-Ti Alloy (pages 41–46)

      H. Atsumi, H. Imai, S. Li, K. Kondoh, Y. Kousaka and A. Kojima

    6. The Characteristics of High Strength and Lead-Free Machinable α-β Duplex Phase Brass Cu-40Zn-Cr-Fe-Sn-Bi Alloy (pages 47–53)

      H. Atsumi, H. Imai, S. Li, K. Kondoh, Y. Kousaka and A. Kojima

    7. Preparation of Biomass Char for Ironmaking and Its Reactivity (pages 55–63)

      Hu Zhengwen, Zhang Jianliang, Zhang Xu, Fan Zhengyun and Li Jing

    8. Intelligent Energy Saving System in Hot Strip Mill (pages 65–76)

      H. Imanari, K. Ohara, K. Kitagoh, Y. Sakiyama and F. Williams

    9. Hot Gas Cleaning with Gas-Solid Reactions and Related Materials for Advanced Clean Power Generation from Coal (pages 77–87)

      Hiromi Shirai and Hisao Makino

    10. Polyalkylene Carbonate Polymers—A Sustainable Material Alternative to Traditional Petrochemical Based Plastics (pages 89–95)

      P. Ferraro

  3. Part II: Materials for Nuclear Waste Disposal and Environmental Cleanup

    1. Characterizing the Defect Population Introduced by Radiation Damage (pages 97–112)

      Paul S. Follansbee

    2. Radiation Shielding Simulation for Wollastonite-Based Chemically Bonded Phosphate Ceramics (pages 113–120)

      J. Pleitt, H. A. Colorado and C. H. Castano

    3. Empirical Model for Formulation of Crystal-Tolerant HLW Glasses (pages 121–126)

      J. Matyás, A. Huckleberry, C.A. Rodriguez, J.D. Vienna and A.A. Kruger

  4. Part III: Energy Conversion/Fuel Cells

    1. Novel SOFC Processing Techniques Employing Printed Materials (pages 127–140)

      P. Khatri-Chhetri, A. Datar and D. Cormier

    2. Manganese Cobalt Spinel Oxide Based Coatings for SOFC Interconnects (pages 141–145)

      Jeffrey W. Fergus, Yingjia Liu and Yu Zhao

    3. CO2 Conversion into C/CO Using ODF Electrodes with SOEC (pages 147–153)

      Bruce Kang, Huang Guo, Gulfam Iqbal and Ayyakkanna Manivannan

    4. Heterofoam: New Concepts and Tools for Heterogeneous Functional Material Design (pages 155–164)

      K. L. Reifsnider, F. Rabbi, R. Raihan, Q. Liu, P. Majumdar, Y. Du and J.M. Adkins

    5. Study on Heteropolyacids/Ti/Zr Mixed Inorganic Composites for Fuel Cell Electrolytes (pages 165–172)

      Uma Thanganathan

  5. Part IV: Energy Storage: Materials, Systems and Applications

    1. Fatigue Testing of Hydrogen-Exposed Austenitic Stainless Steel in an Undergraduate Materials Laboratory (pages 173–185)

      Patrick Ferro, John Wallace, Adam Nekimken, Travis Dreyfoos, Tyler Spilker and Elliot Marshall

    2. LiMnxFe1-x PO4 Glass and Glass-Ceramics for Lithium Ion Battery (pages 187–195)

      Tsuyoshi Honma and Takayuki Komatsu

    3. The Absorption of Hydrogen on Low Pressure Hydride Materials (pages 197–208)

      Gregg A. Morgan and Paul S. Korinko

    4. Polymethylated Phenanthrenes as a Liquid Media for Hydrogen Storage (pages 209–220)

      Dr. Mikhail Redko

    1. You have free access to this content
      Author Index (pages 221–222)

SEARCH