Friction Stir Welding and Processing VII

Copyright © 2013 The Minerals, Metals & Materials Society. All rights reserved.

Friction Stir Welding and Processing VII

Editor(s): Rajiv Mishra, Murray W. Mahoney, Yutaka Sato, Yuri Hovanski, Ravi Verma

Published Online: 29 JAN 2013 08:56AM EST

Print ISBN: 9781118605783

Online ISBN: 9781118658345

DOI: 10.1002/9781118658345

About this Book

Product Information

About The Product

Friction stir welding (FSW) and its variants, friction stir spot welding and friction stir processing, are used in numerous industrial applications and there is considerable activity in the development of FSW processes and their applications. This volume covers the seventh proceedings in this recurring TMS symposium, focusing on all aspects of the science and technology involved in friction stir welding and processing. An important reference for materials scientists and engineers, metallurgists, and mechanical engineers in such areas as shipbuilding, aerospace, automotive, and railway rolling stock.

Table of contents

    1. You have free access to this content
      Front Matter (pages i–xi)

  2. Part I: Friction Stir Processing

    1. Microstructure Refinement and Homogenization of Non-Deforming Constituent Distributions during FSW/P (pages 1–8)

      Jeffrey Woertz, Sarath Menon and Terry McNelley

    2. Nano-Sized Grain Refinement Using Friction Stir Processing (pages 9–19)

      Brian Thompson, Kevin Doherty, Jianqing Su and Rajiv Mishra

    3. Fabrication of Carbon Nanotube Reinforced Aluminum Matrix Composites via Friction Stir Processing (pages 21–28)

      Z.Y. Ma, Z.Y. Liu, B.L. Xiao and W.G. Wang

    4. Flow Behavior of SiC Particles as Tracer Material during the Fabrication of MMCs by Friction Stir Processing (pages 29–38)

      Qing-Yu Shi, Kai Sun, Wei Wang and Gao-qiang Chen

    5. Processing, Microstructure and Mechanical Property Correlation in Al-B4C Surface Composite Produced via Friction Stir Processing (pages 39–46)

      Mageshwari Komarasamy, Rajiv S. Mishra, John A. Baumann, Glenn Grant and Yuri Hovanski

  3. Part II: Friction Stir Welding: High Temperature Materials – I

    1. Comparison between Friction Stir and Submerged Arc Welding Applied to Joining DH36 and E36 Shipbuilding Steel (pages 47–58)

      Stephen Cater, Jonathan Martin, Alexander Galloway and Norman McPherson

    2. Friction Stir Welding of Pipeline Steels (pages 59–69)

      Murray Mahoney, Sam Sanderson, Zhili Feng, Russell Steel, Scott Packer and Dale Fleck

    3. Microstructure and Properties of Friction Stir Processed HY80 Steel (pages 71–79)

      Garth W Young, William C Stewart, Murray W Mahoney, Russell Steel, Jon Babb, Sarath K Menon and Terry R. McNelley

    4. Mechanical Properties and Microstructural Characterization of a Multilayered Multipass Friction Stir Weld in Steel (pages 81–90)

      Yong Chae Lim, Samuel Sanderson, Murray Mahoney, Dongxiao Qiao, Yanli Wang, Wei Zhang and Zhili Feng

    5. Effect of Welding Parameters on the Microstructure and Mechanical Properties of a Friction Stir Welded 11Cr-Ferritic/Martensitic Steel (pages 91–99)

      Yutaka S. Sato, Hiroyuki Kokawa, Yasuhide Yano and Yoshihiro Sekio

    6. Friction-Stir-Welding of Thick Carbon Steels Using a Co-Based Alloy Tool (pages 101–106)

      Itto Sugimoto, Akihiro Sato, Seung Hwan C. Park, Satoshi Hirano, Shinya Imano, Yutaka S. Sato, Hiroyuki Kokawa, Toshihiro Omori and Kiyohito Ishida

    7. Establishing W-Based Friction Stir Welding Tool Life for Thick Section Steel Applications (pages 107–116)

      Michael Eff, Brian Thompson, Sudarsanam Suresh Babu and Todd Leonhardt

    8. Assisted Friction Stir Welding of Carbon Steel: Use of Induction and Laser as Preheating Techniques (pages 117–126)

      Ana I. Álvarez, Víctor Cid, Gloria Pena, Jose Sotelo and David Verdera

    9. Influence of Heat Input on Friction Stir Welding for the ODS Steel MA956 (pages 127–138)

      B.W. Baker, L.N. Brewer, E.S.K. Menon, T.R. McNelley, B. El-Dasher, S. Torres, J.C. Farmer, M.W. Mahoney and S. Sanderson

  4. Part III: Friction Stir Welding: High Temperature Materials - II

    1. Microstructural and Mechanical Investigations of Friction Stir Welded Ti/Ti- and Ti-Alloy/Ti-Alloy-Joints (pages 139–140)

      N. Buhl, G. Wagner, D. Eifler, M. Gutensohn and F. Zillekens

    2. Microstructure and Mechanical Properties of FSW Lap Joint between Pure Copper and 1018 Mild Steel Using Refractory Metal Pin Tools (pages 151–160)

      Md Shamsujjoha, Bharat K. Jasthi, Michael West and Christian Widener

  5. Part IV: Friction Stir Welding: Light Materials - I

    1. Effect of Tool Pin Features and Geometries on Quality of Weld during Friction Stir Welding (pages 161–171)

      Md. Reza-E-Rabby, Wei Tang and Anthony Reynolds

    2. Effect of Friction Stir Processing on Armor Grade Materials (pages 173–182)

      Timothy Johnson, Todd Curtis, Bharat Jasthi, Eric East, Christian Widener and Michael West

    3. Analysis of Mechanical and Metallurgical Properties of Friction Stir Butt Welded AA2024 (pages 183–193)

      Sarah F. Jurak, Dwight Burford and Michael McCoy

    4. Mechanical and Microstructural Properties of FSW Lap Joints (pages 195–203)

      Egoitz Aldanondo, Ekaitz Arruti, Pedro Alvarez and Alberto Echeverria

    5. Mechanical Properties of Repaired 7075-T73 Friction Stir Weld Butt Welds (pages 205–213)

      Christian A. Widener, John Franklin, Bharat K. Jasthi and Michael K. West

    6. Process Development of Integral Fasteners Using Friction Stir Spot Welding with “C-Frame” End Effector on an Aircraft Cabin Door Made from AA6061-T6 and AA2024-T3 (pages 215–224)

      Alan Bruce Handyside, Vishwanath Iyer, Ron Preston, Enkhsaikhan Boldsaikhan and Mike McCoy

    7. Effect of Post-Weld Aging on the Corrosion Resistance and Mechanical Properties of Friction Stir Welded Aluminum Alloy 7475-T73 (pages 225–234)

      Bharat K. Jasthi, Erik Klinckman, Todd Curtis, Christian Widener, Michael West, Robert B. Ruokolainen and Ashish Dasgupta

  6. Part V: Friction Stir Welding: Light Materials - II

    1. On Friction Stir Welding of Mg-Zn-RE-Rr Alloy Using Threaded Tools for Aerospace Application (pages 235–244)

      S.P. Madavan, Manas Mohan Mahapatra and Pradeep Kumar

    2. Magnesium Based Composite via Friction Stir Processing (pages 245–252)

      S. Das, R. S. Mishra, K. J. Doherty, K. C. Cho, B. Davis and R. DeLorme

    3. Effect of Initial Microstructure on the Microstructural Evolution and Joint Efficiency of a WE43 Alloy during Friction Stir Welding (pages 253–261)

      S. Palanivel, R.S. Mishra, B. Davis, R. DeLorme, K.J. Doherty and K.C. Cho

    4. Microstructure in Dissimilar Friction Spot Weld of Al to Mg Alloys Observed by Stop-Action Technique (pages 263–270)

      Uceu Suhuddin, Vanessa Fischer and Jorge F. dos Santos

    5. Optimization of Wear Rate of Friction Stir Welded Al-B4C Composite (pages 271–276)

      K. Kalaiselvan and N. Murugan

  7. Part VI: Friction Stir Welding and Processing: Modeling and Controls

    1. Three-Dimensional Visualization of Metallic Flow and Control of FSW Joint Properties Using New FSP Technique (pages 277–288)

      Hidetoshi Fujii, Yoshiaki Morisada and Takuya Imaizumi

    2. System Parameter Identification for Friction Stir Processing (pages 289–299)

      Dustin Marshall and Carl Sorensen

    3. Advances in Temperature Control for FSP (pages 301–310)

      Kenneth Ross and Carl Sorensen

    4. Analysis of Tool Feedback Forces and Material Flow during Friction Stir Welding (pages 311–320)

      Enkhsaikhan Boldsaikhan and Michael McCoy

    5. Paradigm Shift in Control of the Spindle Axis (pages 321–328)

      Kenneth Ross and Carl Sorensen

    6. A Coupled Thermal/Material Flow Model of Friction Stir Welding Applied to Sc-Modified Aluminum Alloys (pages 329–338)

      C. Hamilton, M. Kopyściański, O. Senkov and S. Dymek

    7. Material Flow and Texture in Friction Extruded Wire (pages 339–347)

      X. Li, W. Tang and A. P. Reynolds

    8. Application of Acoustic Emission Technique to Monitor Friction Stir Welding Process to Produce Defect Free Welds (pages 349–358)

      B M Rajaprakash, C N Suresha and Sarala Upadhya

    1. You have free access to this content
      Author Index (pages 359–360)

    1. You have free access to this content
      Subject Index (pages 361–362)

SEARCH