EPD Congress 2013

Copyright © 2013 The Minerals, Metals & Materials Society. All rights reserved.

EPD Congress 2013

Editor(s): Michael L. Free, Andreas H. Siegmund

Published Online: 30 JAN 2013 09:58AM EST

Print ISBN: 9781118605745

Online ISBN: 9781118658468

DOI: 10.1002/9781118658468

About this Book

Product Information

About The Product

This state-of-the-art reference presents papers from one of the largest annual gatherings of extraction specialists from around world, the 2013 Annual Meeting of The Minerals, Metals & Materials Society. Addressing many aspects of extraction and processing metallurgy, this volume covers in three sections modeling of multi-scale phenomena in materials processing; production, refining, and recycling of rare earth metals; and solar cell silicon. Essential reading for scientists, engineers, and metallurgists in the global extractive and process metallurgy industries.

Table of contents

    1. You have free access to this content
      Front Matter (pages i–xiii)

  2. Part I: Microstructure Evolution I

    1. Numerical Simulation of Solute Diffusion–Controlled Dendritic Growth with Cellular Automaton Method (pages 1–12)

      Sen Luo and Miaoyong Zhu

    2. Multi-Scale Modelling Using 3-Dimensional Adaptive Meshing with an Implicit, Multigrid Solver: A Crystallization Example (pages 13–20)

      A M Mullis, C E Goodyer, P C Bollada and P K Jimack

    3. Modeling of Electromagnetic Stirring in the DC Casting of Aluminum with ANSYS (pages 21–28)

      Sergei Bogovalov, Evgenii Pavlov, Viktor Timofeev, Ivan Tronin and Vladimir Kislov

  3. Part II: Microstructure Evolution II

    1. Computational Multi-Phase Modeling of Cast Energetic Materials (pages 29–38)

      Ruslan Mudryy and Laurentiu Nastac

    2. Large Scale Parallel Lattice Boltzmann Model of Dendritic Growth (pages 39–46)

      Bohumir Jelinek, Mohsen Eshraghi and Sergio Felicelli

    3. Thin Wall Ductile Iron Castings Modeling by Cellular Automaton (pages 47–54)

      Daniel Gurgul, Andriy Burbelko, Marcin Górny and Wojciech Kapturkiewicz

    4. Coupled Flow-Thermal-Microstructural Modeling of the Scanning Laser Epitaxy Process (pages 55–62)

      Ranadip Acharya, Justin J. Gambone, Rohan Bansal, Paul Cilino and Suman Das

  4. Part III: Heat Treatment

    1. Internal Stress Generation during Quenching of Thick Heat Treatable Aluminium Alloys (pages 63–72)

      J-M. Drezet, N. Chobaut, P. Schloth and H. van Swygenhoven

    2. A High Order Mathematical Model for Calculating Casting Temperature Field Based on ADI Method (pages 73–78)

      XiaoFeng Niu, Wei Liang and Hua Hou

    3. Microstructure Evolution Modeling for Solution Treatment of Aluminum Alloys (pages 79–86)

      Hebi Yin, Adrian S. Sabau, Timothy W. Skszek and Xiaoping Niu

    4. Yield Strength Prediction for Rapid Age-Hardening Heat Treatment of Aluminum Alloys (pages 87–94)

      Hebi Yin, Adrian S. Sabau, Gerard M. Ludtka, Timothy W. Skszek and Xiaoping Niu

  5. Part IV: Microstructure Effects

    1. Study on Effects of Interfacial Anisotropy and Elastic Interaction on Morphology Evolution and Growth Kinetics of a Single Precipitate in Mg-Al Alloy by Phase Field Modelling (pages 95–105)

      Guomin Han, Zhiqiang Han, Alan A. Luo, Anil K. Sachdev and Baicheng Liu

    2. Simulation of Microstructural Morphology Evolution of Ni-45wt.%Mo Droplets during Rapid Solidification Process (pages 107–114)

      Jie Ma, Jie-Yu Zhang, Shun-Li Zhao and Jian Zhao

  6. Part V: Fluid Dynamics and Solidification

    1. Numerical Simulating Study on the Solidification Process of Continuous Casting Billet (pages 115–124)

      Tongbo Zhang, Jingshe Li, Hongbo Yang, Fangfang Song and Ting Huang

    2. Optimum Effect of Factors Influencing on Sacrificial Cathodic Protection for Steel Wall (pages 125–133)

      Saad Elias Kaskah

    3. Modeling on Fluid Flow and Inclusion Motion in a Continuous Casting FC-Mold (pages 135–142)

      Qiangqiang Wang, Shusen Li, Yubin Li, Lifeng Zhang and Xinhua Wang

    4. Numerical Simulation of Temperature Field and Pressure in Super Large Regenerative Rotary Hearth Furnace (pages 143–150)

      Qiang Li, Huimin Lu and Lian Zhou

  7. Part VI: Production, Refining and Recycling of Rare Earth Metals

    1. The Ternary System Thermodynamics of Phase Diagram Analysis of Cerium Rare Earth Oxides in Supercritical Water (pages 151–163)

      Chao Li, Hongxu Li, Chuanqi Jiao, Zhiqian Zhang and Chao Wu

    2. Removing Aluminum from Chlorinated Rare Earth Solution by Hydrolysis (pages 165–172)

      Shufang Ding, Wei Chen, Cuicui Ji, Zhiqiang Shan and Fukun Yan

  8. Part VII: Silicon Production and Refining

    1. Production of Silicon from Silica: Solid-Oxide-Membrane Based Electrolysis Process (pages 173–183)

      Yihong Jiang, JiaPeng Xu, Brian Lo, Uday B. Pal and Soumendra N. Basu

    2. Carbochlorination Reduction of Silica Oxides (pages 185–191)

      Mei Song, Meilong Hu, Lu Liu, Qingyu Deng, Xuewei Lv and Chenguang Bai

    3. Solar Grade Silicon Purification Using Liquid Phase Migration Technique (pages 193–200)

      Kunitoshi Matsunaga, Takeshi Yoshikawa and Kazuki Morita

    4. Alloying Refining of Metallurgical Grade Silicon with Rare Earth Elements (pages 201–209)

      Y. Meteleva-Fischer, Y. Yang, R. Boom, B. Kraaijveld and H. Kuntzel

    5. Effect of Oxygen and Carbon on Lifetime in Cz Silicon Pulled from Top-Cuts of Casted Multi-Crystalline Ingot (pages 211–218)

      Song Zhang, Eivind Johannes Øvrelid, Yu Hu and Gabriella Tranell

    6. Effect of Impurities in Monocrystalline Silicon for Solar Cells (pages 219–226)

      Michael Phan Knudson, Mari Juel, Eivind Øvrelid and Marisa Di Sabatino

  9. Part VIII: Slag-based Refining of Silicon and Solar Cell Advances

    1. Reductive Removal of Phosphorus in Silicon Using CaO-CaF2 Slag (pages 227–236)

      Hiroaki Kawamura, Yutaka Yanaba, Takeshi Yoshikawa and Kazuki Morita

    2. Boron and Phosphors Distribution Equilibria among the Molten Si, Slag and Metal Phases (pages 237–242)

      Kai Tang, Egil Krystad, Gabriella Trenell and Merete Tangstad

    3. Antireflective Silicon Nanostructures Fabricated by Cheap Chemical Etchant and Coated by Atomic Layer Deposited Al2O3 Layer (pages 243–250)

      Zhihao Yue, Honglie Shen, Ye Jiang and Yahui Teng

  10. Part IX: General Poster Session

    1. Application of Non-Stationary Thermal Model for Simulation and Investigation of Heat and Refining Processes of Ti During EBMR (pages 251–260)

      Katia Vutova, Veliko Donchev, Vania Vassileva, Dinesh P. Amalnerkar, Nagegownivari Munirathnam and Tirthalli Prakash

    2. Investigation of Optimum Cementation Conditions of Ruthenium with Experimental Design (pages 261–268)

      B. Zeytuncu, M.H. Morcali, O.H. Celik and O. Yucel

    3. Kinetic Study of Recovery of Iron from Cassiterite Ore (pages 269–276)

      Gerald Onyedika, Tochi Onwumere and Martin Ogwuegbu

    4. Non-Isothermal Kinetics Research of the Pellet under High Reduction Potential (pages 277–285)

      Zuo Haibin, Jiao Kexin, Xu Runsheng and Zhang Jianliang

    5. Reduction of Pellets of Basic Oxygen Furnace (BOF) Dust Using Hydrogen (pages 287–292)

      TMS, Eduardo Junca, Girley Ferreira Rodrigues, Victor Bridi Telles, Denise Crocce Romano Espinosa and Jorge Alberto Soares Tenorio

    1. You have free access to this content
      Author Index (pages 293–294)

    1. You have free access to this content
      Subject Index (pages 295–296)

SEARCH