Magnesium Technology 2013

Copyright © 2013 The Minerals, Metals & Materials Society. All rights reserved.

Magnesium Technology 2013

Editor(s): Norbert Hort, Suveen N. Mathaudhu, Neale R. Neelameggham, Martyn Alderman

Published Online: 20 FEB 2013 10:11AM EST

Print ISBN: 9781118605523

Online ISBN: 9781118663004

DOI: 10.1002/9781118663004

About this Book

Product Information

About The Product

The Magnesium Technology Symposium, the event on which this volume is based, is one of the largest yearly gatherings of magnesium experts in the world. Papers reflect all aspects of the field including primary production to applications, recycling, basic research findings, and industrialization. Readers will find broad coverage of current topics, including alloys and their properties, cast products and processing, wrought products and processing, corrosion and surface finishing, ecology, and more. New and emerging applications in such areas as hydrogen storage are also examined.

Table of contents

    1. You have free access to this content
      Front Matter (pages i–xvii)

  2. Part I: Plenary

    1. A Brief History of the Development of Grain Refinement Technology for Cast Magnesium Alloys (pages 1–8)

      D. H. StJohn, P. Cao, M. Qian and M. A. Easton

  3. Part II: Creep

    1. Compressive Creep Properties of Wrought High Temperature Magnesium Alloys in Axial and Transverse Orientation - A Neutron Diffraction Study (pages 9–16)

      D. Sediako, L. Bichler, M. van Hanegem and S. Shook

    2. Creep Behaviour of Mg Binary Solid Solutions (pages 17–20)

      Saeideh Abaspour and C.H. Cáceres

    3. Influence of Yttrium on Creep Behavior in Nano-Crystalline Magnesium Using Molecular Dynamics Simulation (pages 21–26)

      M. A. Bhatia and K.N. Solanki

    4. Aging Behavior and Microstructural Evolution in Mg-3Nd-0.2Zn-0.5Zr Alloy (pages 27–32)

      Amirreza Sanaty Zadeh, Xiangyu Xia, Alan A. Luo, Joseph E. Jakes and Donald S. Stone

  4. Part III: Cast Materials

    1. FE Modelling of Tensile and Impact Behaviours of Squeeze Cast Magnesium Alloy AM60 (pages 33–39)

      Sante DiCecco, William Altenhof and Henry Hu

    2. High Temperature Deformation of Magnesium Alloy TX32-0.4Al-0.8Si (pages 41–45)

      C. Dharmendra, K.P. Rao, N. Hort and K.U. Kainer

  5. Part IV: Primary Production and Shaping

    1. Doing Projects in a Foreign Language – Communications Management, Issues and Strategies (pages 47–53)

      Deling Xian

    2. Impact of Site Elevation on Mg Smelter Design (pages 55–58)

      Phillip W. Baker

    3. Purification of Highly Contaminated Magnesium Melt (pages 59–63)

      Byoung-Gi Moon, Bong-Sun You and Ki-Ho Koh

    4. Selective Laser Melting of Magnesium and Magnesium Alloys (pages 65–68)

      Matthias Gieseke, Christian Noelke, Stefan Kaierle, Volker Wesling and Heinz Haferkamp

    5. Evolution of the Magnetherm Magnesium Reduction Process (pages 69–74)

      James C. Sever and Marlyn Ballain

    6. Research on New Type Materials Preparation for Magnesium Production by Silicothermic Process (pages 75–79)

      Wen Ming, Zhang Ting-An, Dou Zhi-He, Ren Xiao-Dong, Zhang Rui and Zhou Lian

  6. Part V: Texture and Twinning

    1. Effect of Grain Size and Basal Texture on Tensile Properties and Fracture Characteristics of Extruded AZ31 Alloy (pages 81–87)

      Hsiang-Ching Chen, Truan-Sheng Lui and Li-Hui Chen

    2. Interaction between a Mg17Al12 Precipitate and {1012} <1012> Twin Boundary in Magnesium Alloys (pages 89–94)

      B. Li and S.N. Mathaudhu

    3. Microstructure and Texture Evolution in a Magnesium Alloy during Extrusion at Various Extrusion Speeds (pages 95–99)

      Q. Ma, S.J. Horstemeyer, B. Li, Z. McClelland, P.T. Wang and M.F. Horstemeyer

    4. The Texture and Microstructure Evolution of Mg-Zn-Ce Alloys (pages 101–106)

      M. Sanjari, A. Farzadfar, T. Sakai, H. Utsunomiya, E. Essadiqi, In-Ho Jung and S. Yue

    5. Twin Boundary Migration Creating Zero Shear Strain: In-Situ TEM Observations and Atomistic Simulations (pages 107–111)

      B.Y. Liu, B. Li and Z.W. Shan

    6. Microstructure Characterization of Weakly Textured and Fine Grained AZ61 Sheet (pages 113–118)

      T.D. Berman, W. Donlon, C.K. Hung, P. Milligan, R. Decker, T.M. Pollock and J.W. Jones

  7. Part VI: Wrought Materials I

    1. Flow Behavior and Hot Workability of Pre-Extruded AZ80 Magnesium Alloy (pages 119–125)

      Lei Gao, Alan A. Luo, Shiyi Wang and Xiaoqin Zeng

    2. Inverse Strain Rate Sensitivity of Bendability of an AZ31 Sheet in Three-Point Bending (pages 127–131)

      B. Li, S.J. Horstemeyer, A.L. Oppedal, P.T. Wang and M.F. Horstemeyer

    3. Annealing of Cold and Warm Rolled AZ31B Magnesium Alloy Sheets (pages 133–137)

      Litzy L. Choquechambi Catorceno and Denise Adorno Lopes

    4. Gas-Pressure Bulge Forming of Mg AZ31 Sheet at 450°C (pages 139–144)

      Alexander J. Carpenter, Jon T. Carter, Louis G. Hector and Eric M. Taleff

  8. Part VII: Corrosion I

    1. Efficiency of a New Hexavalent Chromium-Free Chemical Pickling Process Based on Organic and Inorganic Acids on Magnesium Alloys Mg-Y-RE-Zr and Mg-Zn-RE-Zr (pages 145–152)

      Hélène Ardelean, Antoine Seyeux, Sandrine Zanna, Philippe Marcus, Sophie Pettier, Nathalie Le Pottier and Daniel Lecuru

    2. Galvanic Corrosion of Mg-Zr Alloy and Steel or Graphite in Mineral Binders (pages 153–155)

      David Lambertin, Adrien Rooses and Fabien Frizon

    3. The Influence of Mg-Zr Master Alloy Microstructure on the Corrosion of Mg (pages 157–162)

      D.S. Gandel, M.A. Eastona, M.A. Gibsona, T. Abbott and N. Birbilis

    4. The Use of AC-DC-AC Methods in Assessing Corrosion Resistance Performance of Coating Systems for Magnesium Alloys (pages 163–168)

      Robert C. McCune, Vinod Upadhyay, Yar-Ming Wang and Dante Battocchi

    5. Corrosion Behavior of Cerium-Based Conversion Coatings on Magnesium Alloys Exposed to Ambient Conditions (pages 169–172)

      Carlos E. Castano, Surender Maddela and Matthew J. O'Keefe

  9. Part VIII: Nanostructured Materials

    1. Thermal Stability of Ultra-Fine Grained Magnesium Alloy Processed by Extrusion and ECAP (pages 173–179)

      Jitka Vrátná and Miloš Janeèek

  10. Part IX: Corrosion II

    1. Formation of Vanadate Conversion Coating on AZ31 Magnesium Alloy (pages 181–187)

      S. A. Salman, K. Kuroda and M. Okido

  11. Part X: Joining and Friction Processing

    1. Microstructure Modification and Performance Improvement of Mg-RE Alloys by Friction Stir Processing (pages 189–196)

      Yujuan Wu, Liming Peng, Feiyan Zheng, Xuewen Li, Dejiang Li and Wenjiang Ding

    2. A Multi-Stage Approach for Predicting Fatigue Damage in Friction Stir Spot Welded Joints of Mg AZ31 Alloy (pages 197–202)

      H.M. Rao and J.B. Jordon

  12. Part XI: Wrought Materials II

    1. Recrystallization Behavior of a MgAlCa Alloy during Thermomechanical Processing and Subsequent Heat Treatment (pages 203–209)

      V.M. Miller and T.M. Pollock

    2. The Influence of Deformation Mechanisms on Rupture of AZ31B Magnesium Alloy Sheet at Elevated Temperatures (pages 211–215)

      Aravindha R. Antoniswamy, Alexander J. Carpenter, Jon T. Carter, Louis G. Hector and Eric M. Taleff

    3. Effect of the Extrusion Conditions on the Microstructure and Mechanical Properties of Indirect Extruded Mg-Zn-Y Alloy with LPSO Phase (pages 217–219)

      Jonghyun Kim and Yoshihito Kawamura

    4. Investigation of Mechanical Properties and Deformation Behavior of CaO Added Mg-6Zn-1.2Y Sheets (pages 221–224)

      Hyun Kyu Lim, Young-Ok Yoon and Shae K. Kim

  13. Part XII: Phase Formation

    1. Bounds to Hardening by Solid Solution, Precipitation and Short Range Order in Mg Binary Alloys (pages 225–230)

      C.H. Cáceres and Saeideh Abaspour

    2. A New Magnesium Alloy System: TEXAS (pages 231–235)

      Björn Wiese, Chamini Mendis, Carsten Blawert, Eric Nyberg, Karl Ulrich Kainer and Norbert Hort

    3. Effect of Sn Additions on the Age Hardening Response, Microstructures and Corrosion Resistance of Mg-0.8Ca (wt%) Alloys (pages 237–241)

      C.L. Mendis, D. Tolnai, C. Blawert and N. Hort

    4. Thermodynamics of Phase Formation in Mg-La-Ce-Nd Alloys (pages 243–248)

      Rainer Schmid-Fetzer, Joachim Gröbner, Artem Kozlov, Milan Hampl, Mark A. Easton, Suming Zhu, Mark A. Gibson and Jian-Feng Nie

    5. Phase Stability Investigation of the Mg-Zn-Sm System (pages 249–252)

      Xiangyu Xia, Amirreza Sanaty Zadeh, Chuan Zhang, Xiaoqin Zeng, Donald Stone and Alan. A. Luo

    6. In Situ Synchrotron Diffraction of the Solidification of Mg-RE Alloys (pages 253–257)

      D. Tolnai, C.L. Mendis, A. Stark, G. Szakács, B. Wiese, K.U. Kainer and N. Hort

    7. Nucleation Kinetics of the γ-Phase in a Binary Mg-Al Alloy (pages 259–262)

      Mehdi Lalpoor, J.S. Dzwonczyk, N. Hort and S.E. Offerman

  14. Part XIII: Solidification

    1. Computational Multi-Scale Modeling of the Microstructure and Segregation of Cast Mg Alloys at Low Superheat (pages 263–270)

      Laurentiu Nastac and Nagy El-Kaddah

    2. Effect of Casting Defects Distribution on the Beginning of Tensile Fracture in Semi-Solid Injected Magnesium AZ91D Alloy (pages 271–274)

      Yuichiro Murakami, Kenji Miwa, Naoyuki Kanetake and Shuji Tada

    3. Effect of Inoculation Method of Refiner on the Grain Refinement of AZ91 Alloy (pages 275–279)

      Jun Ho Bae, Young Min Kim, Chang Dong Yim, Ha-Sik Kim and Bong Sun You

  15. Part XIV: Nanocomposites and Metal Matrix Composites

    1. Nanoparticle Addition to Enhance the Mechanical Response of Magnesium Alloys Including Nanoscale Deformation Mechanisms (pages 281–288)

      Muralidharan Paramsothy and Manoj Gupta

    2. Properties of Extruded Disintegrable Metal Composites (pages 289–292)

      Bobby Salinas, Zhiyue Xu and John Welch

    3. Effect of Fiber Volume Fractions on Corrosion Resistance of Mg AM60 Alloy-Based Composites in NaCl Solutions (pages 293–297)

      Xuezhi Zhang, Xiaoping Niu and Henry Hu

    4. Synthesis of Disintegrable Metal Composite for Oilfield Applications (pages 299–303)

      Zhihui Zhang, Bobby Salinas, Caleb Newman and Zhiyue Xu

  16. Part XV: Wrought Materials III

    1. Effect of Precipitation on Dynamic Recrystallized Grain Size in a Magnesium Alloy (pages 305–312)

      Abu Syed Humaun Kabir, Jing Su, In-Ho Jung and Stephen Yue

    2. Texture Development in an Extruded Magnesium Alloy during Compression along the Transverse Direction (pages 313–316)

      D. Sarker and D.L. Chen

    3. Evolution of Microstructure during Caliber Rolling of AZ31 Alloy (pages 317–322)

      Alok Singh, Hidetoshi Somekawa, Tadanobu Inoue and Toshiji Mukai

    4. Increasing Volume Fraction of Precipitates and Strength of a Mg-Zn-Y Alloy by Pre-Aging Deformation (pages 323–328)

      Julian M Rosalie, Hidetoshi Somekawa, Alok Singh and Toshiji Mukai

    5. Mapping the Mechanical Properties of Alloyed Magnesium (AZ 61) (pages 329–332)

      Jennifer L. Hay and Phillip Agee

  17. Part XVI: Microstructure

    1. Effects of Alloying Elements and Cooling Rate on Morphology of Phases in CaO Added Mg-Al-Si Alloys (pages 333–339)

      Young-Gil Jung, Hyun Kyu Lim, Young-Ok Yoon, Shae K. Kim and Do Hyang Kim

    2. Microstructure and Mechanical Properties of Die Cast Magnesium-Aluminum-Tin Alloys (pages 341–345)

      A.A. Luo, P. Fu, X. Zeng, L. Peng, B. Hu and A.K. Sachdev

    3. Study on Microstructure and Mechanical Property of Squeeze Casting AZ91D Magnesium Alloy (pages 347–350)

      Yanda Li, Zhiqiang Han, Alan A. Luo, Anil K. Sachdev and Baicheng Liu

    4. Tailoring Precipitates in Mg-6Zn-2Gd Based Alloy Subjected to High Pressure Torsion (pages 351–356)

      J.H. Li and P. Schumacher

    5. Microstructure and Phase Evolution in Mg-Gd and Mg-Gd-Nd Alloys with Additions of Zn, Y and Zr (pages 357–361)

      S. Khawaled, M. Bamberger and A. Katsman

  18. Part XVII: Twin Roll Casting

    1. Influence of Temperature and Rolling Speed on Twin Roll Cast Strip (pages 363–370)

      G. Kurz, J. Bohlen, L. Stutz, D. Letzig and K.U. Kainer

    2. Mathematical Modeling of the Effect of Roll Diameter on the Thermo-Mechanical Behavior of Twin Roll Cast AZ31 Magnesium Alloy Strips (pages 371–375)

      Amir Hadadzadeh and Mary Wells

    1. You have free access to this content
      Author Index (pages 377–378)

    1. You have free access to this content
      Subject Index (pages 379–381)

SEARCH