Advanced Ceramic Coatings and Materials for Extreme Environments III

Copyright © 2014 The American Ceramic Society. All rights reserved.

Advanced Ceramic Coatings and Materials for Extreme Environments III

Editor(s): Hua-Tay Lin, Taejin Hwang, Soshu Kirihara, Sujanto Widjaja

Published Online: 22 NOV 2013 09:50PM EST

Print ISBN: 9781118807552

Online ISBN: 9781118807651

DOI: 10.1002/9781118807651

About this Book

Ceramic Engineering and Science Proceedings Volume 34, Issue 3 - Advanced Ceramic Coatings and Materials for Extreme Environments III 

A collection of 12 papers from The American Ceramic Society's 37th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 27-February 1, 2013. This issue includes papers presented in the Advanced Ceramic Coatings and Systems and Next Generation Technologies for Innovative Surface Coatings
symposia.

Table of contents

    1. You have free access to this content
      Front Matter (pages i–xi)

    2. Progress in EBC Development for Silicon-Based, Non-Oxide Ceramics (pages 1–7)

      C.A. Lewinsohn, H. Anderson, J. Johnston and Dongming Zhu

    3. Fabrication of Slurry Based Y-Si-Al-O Environmental Barrier Coating on the Porous Si3N4 Ceramics (pages 9–17)

      Yinchao Liu, Chao Wang, Xuefen Lu and Hongjie Wang

    4. Creep and Environmental Durability of Environmental Barrier Coatings and Ceramic Matrix Composites under Imposed Thermal Gradient Conditions (pages 19–30)

      Matthew Appleby, Gregory N. Morscher and Dongming Zhu

    5. Dynamic Oblique Angle Deposition of Nanostructures for Energy Applications (pages 31–45)

      G.-C. Wang, I. Bhat and T.-M. Lu

    6. Photoinduced Hydrophilicity and Photocatalytic Properties of Nb2O5 Thin Films (pages 47–53)

      Raquel Fiz, Linus Appel and Sanjay Mathur

    7. Hard Nanocomposite Coatings: Thermal Stability, Protection of Substrate against Oxidation, Toughness and Resistance to Cracking (pages 55–65)

      J. Musil

    8. Preparation of Epitaxially Grown Cr-Si-N Thin Films by Pulsed Laser Deposition (pages 67–76)

      T. Endo, K. Suzuki, A. Sato, T. Suzuki, T. Nakayama, H. Suematsu and K. Niihara

    9. Influence of Oxygen Content on the Hardness and Electrical Resistivity of Cr(N,O) Thin Films (pages 77–87)

      Aoi Sato, Toshiyuki Endo, Kazuma Suzuki, Tsuneo Suzuki, Tadachika Nakayama, Hisayuki Suematsu and Koichi Niihara

    10. Nanocomposite MO-CU-N Coatings Deposited by Reactive Magnetron Sputtering Process with a Single Alloying Target (pages 89–96)

      Duck Hyeong Jung, Caroline Sunyong Lee and Kyoung Il Moon

    11. Customized Coating Systems for Products with Added Value from Development to High Volume Production (pages 97–103)

      T. Hosenfeldt, Y. Musayev and Edgar Schulz

    12. A Study on the Improvement of the Service Life of Shaft-Bushing Tribo-Systems by Plasma Sulfur Nitrocarburing Process (pages 105–116)

      Kyoung Moon, Hyun Jun Park, Hyoung Jun Kim, Jin Uk Kim and Cheol Wong Byun

    13. Microstructural Characterisation of Porous TiO2 Ceramic Coatings Fabricated by Plasma Electrolytic Oxidation of Ti (pages 117–127)

      Po-Jen Chu, Aleksey Yerokhin, Allan Matthews and Ju-Liang He

    14. You have free access to this content
      Author Index (page 129)

SEARCH