7th International Symposium on High-Temperature Metallurgical Processing

7th International Symposium on High-Temperature Metallurgical Processing

Editor(s): Jiann-Yang Hwang, Tao Jiang, P. Chris Pistorius, Gerardo R.F. Alvear F., Onuralp Yücel, Liyuan Cai, Baojun Zhao, Dean Gregurek, Varadarajan Seshadri

Published Online: 3 FEB 2016 11:17AM EST

Print ISBN: 9781119225751

Online ISBN: 9781119274643

DOI: 10.1002/9781119274643

About this Book

The technology, operation, energy, environmental, analysis, and future development of the metallurgical industries utilizing high temperature processes are covered in the book. The innovations on the extraction and production of ferrous and nonferrous metals, alloys, and refractory and ceramic materials, the heating approaches and energy management, and the treatment and utilizations of the wastes and by-products are the topics of special interests.

 This book focuses on the following issues:

  • High Efficiency New Metallurgical Process and Technology
    Fundamental Research of Metallurgical Process
  • Alloys and Materials Preparation
  • Direct Reduction and Smelting Reduction
  • Coking, New Energy and Environment
  • Utilization of Solid Slag/Wastes and Complex Ores
  • Characterization of High Temperature Metallurgical Process

Table of contents

    1. You have free access to this content
  1. Part I: Energy Efficient Clean Metallurgical Technology

  2. Part II: Extraction and Recovery of Metals

  3. Part III: Alloys and Materials Preparation

    1. Chapter 24

      Thermodynamic Analysis and Experiments on Vacuum Separation of Sn-Sb Alloy (pages 189–196)

      Junjie Xu, Lingxin Kong, Yifu Li, Bin Yang, Yongnian Dai, Kunhua Wu and Anxiang Wang

  4. Part IV: Fundamental Research of Metallurgical Process

  5. Part V: Direct Reduction and Smelting Reduction

  6. Part VI: Sintering and Pelletizing of Iron Ores

  7. Part VII: Utilization of Complex Ores

    1. Chapter 54

      Research on Leaching of Zinc Sulfide Ores Through Synergistic Coordination (pages 435–441)

      Kun Yang, Shiwei Li, Jinhui Peng, Libo Zhang, Aiyuan Ma, Weiheng Chen and Feng Xie

  8. Part VIII: Characterization and Simulation of High Temperature Process

    1. Chapter 64

      Analysis of Turbulence at The Metal/Slag Interface in The Meniscus Region of A Continuous Casting Mold Through Physical and Mathematical Modelling (pages 519–526)

      Varadarajan Seshadri, Jose Dimas De Arruda, Amanda Aparecida Fátima Arruda, Samuel da Silva De Souza, Carlos Antonio Da Silva and Itavahn Alves Da Silva

  9. Part IX: Treatment and Recycling of Solid Slag/Wastes

    1. Chapter 68

      Microwave Heating of Waste Tires (pages 551–557)

      Yuzhe Zhang, Jiann-Yang Hwang, Zhiwei Peng, Matthew Andriese, Bowen Li, Xiaodi Huang, Xinli Wang and Likun Li

    2. Chapter 74

      Separation of Hazardous Impurities from Blast Furnace Dust by Water Vapor Enhanced Microwave Roasting (pages 597–604)

      Aiyuan Ma, Chenyu Sun, Guojiang Li, Yongguang Luo, Xuemei Zheng, Jinhui Peng, Libo Zhang and Chao Liu

  10. Part X: Poster Session

    1. Chapter 80

      Filtration Property of Pure Willemite Acid Leaching Sludge Under Pressure (pages 651–658)

      Hailong Yang, Cunxiong Li, Chang Wei, Zhigan Deng, Xingbin Li, Gang Fan and Minting Li

    2. Chapter 81

      Hydrothermal Sulfidation of Cerussite with Elemental Sulfur (pages 659–666)

      LI Cun-xiong, Yang Hai-long, Wei Chang, LI Xing-bin, Deng Zhi-Gan, FAN Gang and Li Min-ting

    1. You have free access to this content
    1. You have free access to this content

SEARCH