Neutrons and Synchrotron Radiation in Engineering Materials Science: From Fundamentals to Material and Component Characterization

Copyright © 2008 Wiley-VCH Verlag GmbH & Co. KGaA

Neutrons and Synchrotron Radiation in Engineering Materials Science: From Fundamentals to Material and Component Characterization

Editor(s): Walter Reimers, Anke Rita Pyzalla, Andreas K. Schreyer, Helmut Clemens

Published Online: 14 MAR 2008

Print ISBN: 9783527315338

Online ISBN: 9783527621927

DOI: 10.1002/9783527621927

About this Book

Product Information

About The Product

Besides its coverage of the four important aspects of synchrotron sources, materials and material processes, measuring techniques, and applications, this ready reference presents both important method types: diffraction and tomography.
Following an introduction, a general section leads on to methods, while further sections are devoted to emerging methods and industrial applications. In this way, the text provides new users of large-scale facilities with easy access to an understanding of both the methods and opportunities offered by different sources and instruments.

Table of contents

    1. You have free access to this content
      Front Matter (pages I–XXIV)

  2. Part I: General

    1. Chapter 1

      Microstructure and Properties of Engineering Materials (pages 1–20)

      Prof. Dr. Helmut Clemens and Christina Scheu

    2. Chapter 2

      Internal Stresses in Engineering Materials (pages 21–56)

      Prof. Dr. Anke Rita Pyzalla

    3. Chapter 3

      Texture and Texture Analysis in Engineering Materials (pages 57–77)

      Heinz-Günter Brokmeier and Sang-Bong Yi

    4. Chapter 4

      Physical Properties of Photons and Neutrons (pages 79–89)

      Prof. Dr. Andreas Schreyer

    5. Chapter 5

      Radiation Sources (pages 91–112)

      Wolfgang Knop, Philipp Klaus Pranzas, Peter Schreiner and Rolf Treusch

  3. Part II: Methods

    1. Chapter 6

      Introduction to Diffraction Methods for Internal Stress Analyses (pages 113–135)

      Prof. Dr. Walter Reimers

    2. Chapter 7

      Stress Analysis by Angle-Dispersive Neutron Diffraction (pages 137–153)

      Peter Staron

    3. Chapter 8

      Stress Analysis by Energy-Dispersive Neutron Diffraction (pages 155–176)

      Javier Roberto Santisteban

    4. Chapter 9

      Residual Stress Analysis by Monochromatic High-Energy X-rays (pages 177–194)

      René Valéry Martins

    5. Chapter 10

      Residual Stress Analysis by White High Energy X-rays (pages 195–220)

      Christoph Genzel and Prof. Dr. Anke Rita Pyzalla

    6. Chapter 11

      Diffraction Imaging for Microstructure Analysis (pages 221–228)

      Thomas Wroblewski

    7. Chapter 12

      Basics of Small-Angle Scattering Methods (pages 229–237)

      Philipp Klaus Pranzas

    8. Chapter 13

      Small-Angle Neutron Scattering (pages 239–248)

      Philipp Klaus Pranzas

    9. Chapter 14

      Decomposition Kinetics in Copper–Cobalt Alloy Systems: Applications of Small-Angle X-ray Scattering (pages 249–256)

      Günter Goerigk

    10. Chapter 15

      B3 Imaging (pages 257–286)

      Wolfgang Treimer

    11. Chapter 16

      Neutron and Synchrotron-Radiation-Based Imaging for Applications in Materials Science – From Macro- to Nanotomography (pages 287–307)

      Felix Beckmann

    12. Chapter 17

      µ-Tomography of Engineering Materials (pages 309–321)

      Astrid Haibel

    13. Chapter 18

      Diffraction Enhanced Imaging (pages 323–332)

      Michael Lohmann

  4. Part III: New and Emerging Methods

    1. Chapter 19

      3D X-ray Diffraction Microscope (pages 333–351)

      Henning Friis Poulsen, Wolfgang Ludwig and Søren Schmidt

    2. Chapter 20

      3D Micron-Resolution Laue Diffraction (pages 353–370)

      Gene E. Ice

    3. Chapter 21

      Quantitative Analysis of Three-Dimensional Plastic Strain Fields Using Markers and X-ray Absorption Tomography (pages 371–377)

      Kristoffer Haldrup and John A. Werty

    4. Chapter 22

      Combined Diffraction and Tomography (pages 379–386)

      Prof. Dr. Anke Rita Pyzalla and Augusta Isaac

  5. Part IV: Industrial Applications

    1. Chapter 23

      Diffraction-Based Residual Stress Analysis Applied to Problems in the Aircraft Industry (pages 387–411)

      Peter Staron, Funda S. Bayraktar, Mustafa Koçak, Andreas Schreyer, Ulrike Cihak, Helmut Clemens and Martin Stockinger

    2. Chapter 24

      Optimization of Residual Stresses in Crankshafts (pages 413–419)

      Prof. Dr. Anke Rita Pyzalla

    1. You have free access to this content
      Index (pages 421–436)

SEARCH