SEARCH

SEARCH BY CITATION

References

  • Barton, C. A., and M. D. Zoback (1994), Stress perturbations associated with active faults penetrated by boreholes: Possible evidence for near-complete stress drop and a new technique for stress magnitude measurement, J. Geophys. Res., 99(B5), 93739390.
  • Barton, C. A., M. D. Zoback, and K. L. Burns (1988), In-situ stress orientation and magnitudes at the Fenton geothermal site, New Mexico, Determined from borehole breakouts, Geophys. Res. Lett., 15(5), 467470.
  • Barton, C. A., M. D. Zoback, and D. B. Moos (1995), Fluid flow along potentially active faults in crystalline rock, Geology, 23(8), 683686.
  • Barton, C. A., D. B. Moos, and K. Tezuka (2009), Geomechanical wellbore imaging: Implications for reservoir fracture permeability, AAPG Bull., 93(11), 15511569.
  • Chang, C., M. D. Zoback, and A. Khaksar (2006), Empirical relations between rock strength and physical properties in sedimentary rocks, J. Pet. Sci. Eng., 51(3), 223237.
  • Chiaramonte, L., M. D. Zoback, J. Friedmann, and V. Stamp (2008), Seal integrity and feasibility of CO 2 sequestration in the Teapot Dome EOR pilot: Geomechanical site characterization, Environ. Geol., 54(8), 16671675.
  • Collins, D., P. Papadeas, C. Brown, and J. Walker (2011), High-resolution stratigraphy at the northern end of the Newark Basin, paper presented at the Carbon Storge Program Infrastructure Annual Review Meeting, Pittsburgh, Pa.
  • Du, W.-X., W.-Y. Kim, and L. R. Sykes (2003), Earthquake source parameters and state of stress for the northeastern United States and southeastern Canada from analysis of regional seismograms, Bull. Seismol. Soc. Am., 93(4), 16331648.
  • Finkbeiner, T., C. A. Barton, and M. D. Zoback (1997), Relationships among in-situ stress, fractures and faults, and fluid flow: Monterey Formation, Santa Maria Basin, California, AAPG Bull., 81(12), 19751999.
  • Goldberg, D., T. Lupo, M. Caputi, C. Barton, and L. Seeber (2003), Stress regimes in the Newark Basin rift: Evidence from core and downhole data, in The Great Rift Valleys of Pangea in Eastern North America, Tectonics, Structure, and Volcanism, vol. 1, edited by P. M. LeTourneau and P. E. Olsen, 214 pp., Columbia Univ. Press, New York.
  • Houghton, H. (1990), Hydrogeology of the early mesozoic rocks of the Newark Basin, New Jersey, in Aspects of Groundwater in New Jersey: 7th annual meeting of the Geological Association of New Jersey, E1E36, Geological Association of New Jersey, Union, New Jersey.
  • Jaeger, J. C., N. G. W. Cook, and R. W. Zimmerman (2007), Fundamentals of Rock Mechanics, Blackwell Publishing, Malden, Mass.
  • Keranen, K. M., H. M. Savage, G. A. Abers, and E. S. Cochran (2013), Potentially induced earthquakes in Oklahoma, USA: Links between wastewater injection and the 2011 Mw 5.7 earthquake sequence, Geology, 41(6), 699702.
  • Kim, W.-Y. (2013), Induced seismicity associated with fluid injection into a deep well in Youngstown, Ohio, J. Geophys. Res. Solid Earth, 118, 35063518, doi:10.1002/jgrb.50247.
  • Lal, M. (1999), Shale stability: Drilling fluid interaction and shale strength, paper presented at SPE Asia Pacific Oil and Gas Conference, Caracas, Venezuela.
  • Matter, J. M., D. S. Goldberg, R. H. Morin, and M. Stute (2006), Contact zone permeability at intrusion boundaries: New results from hydraulic testing and geophysical logging in the Newark Rift Basin, New York, USA, Hydrogeol. J., 14(5), 689699.
  • McGarr, A. (2012), Some factors controlling the seismic hazard due to earthquakes induced by fluid injection at depth, paper presented at 2012 Fall Meeting, AGU, San Francisco, Calif., 3–7 Dec.
  • Moos, D. B., and M. D. Zoback (1990), Utilization of observations of well bore failure to constrain the orientation and magnitude of crustal stresses: Application to continental, Deep Sea Drilling Project, and Ocean Drilling Program boreholes, J. Geophys. Res., 95(B6), 93059325.
  • Moos, D. B., and M. D. Zoback (1993), Near-surface, “thin skin” reverse faulting stresses in the southeastern United States, Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 30(7), 965971.
  • National Academy of Science (NAS) (2012), Induced Seismicity Potential in Energy Technologies, Rep, 9780309253673, The National Academies Press, Washington D. C.
  • Olsen, P. E., D. V. Kent, B. Cornet, W. K. Witte, and R. W. Schlische (1996), High-resolution stratigraphy of the Newark rift basin (early Mesozoic, eastern North America), Geol. Soc. Am. Bull., 108(1), 4077.
  • Olsen, P. E., M. O. Withjack, R. W. Schlishe, D. S. Goldberg, D. V. Kent, K. Tamulonis, M. Coueslan, and D. J. Collins (2011), Subsurface images of the northern Newark Basin, New York, USA and their implications for carbon sequestration, Abstract GC44A-07 presented at 2011 Fall Meeting, AGU, San Francisco, Calif., 5–9 Dec.
  • Pacala, S., and R. Socolow (2004), Stabilization wedges: Solving the climate problem for the next 50 years with current technologies, Science, 305(5686), 968972.
  • Peška, P., and M. D. Zoback (1995), Compressive and tensile failure of inclined well bores and determination of in situ stress and rock strength, J. Geophys. Res., 100(B7), 12,79112,811.
  • Shamir, G., and M. D. Zoback (1992), Stress orientation profile to 3.5 km depth near the San Andreas Fault at Cajon Pass, California, J. Geophys. Res., 97(B4), 50595080.
  • Slater, B. E., L. Smith, M. P. Tymchak, and D. J. Collins (2012), Preliminary results from the TriCarb deep stratigraphic well drilled into the Newark Rift Basin, Rockland County, NY, paper presented at the 41st Annual Eastern Section AAPG Meeting, AAPG, Cleveland, Ohio, 22–26 Sept.
  • Span, R., and W. Wagner (1996), A new equation of state for carbon dioxide covering the fluid region from the triple-point temperature to 1100 K at pressures up to 800 MPa, J. Phys. Chem. Ref. Data, 25, 1509.
  • Sperner, B., B. Muller, O. Heidbach, D. Delvaux, J. Reinecker, and K. Fuchs (2003), Tectonic stress in the Earth's crust: Advances in the World Stress Map project, Spec. Publ. Geol. Soc. London, 212, 101116.
  • Sykes, L. R., J. G. Armbruster, W.-Y. Kim, and L. Seeber (2008), Observations and tectonic setting of historic and instrumentally located earthquakes in the greater New York City–Philadelphia area, Bull. Seismol. Soc. Am., 98(4), 16961719.
  • Tymchak, M. P., D. J. Collins, C. B. Brown, J. Conrad, P. W. Papadeas, M. L. Coueslan, K. Tamulonis, D. S. Goldberg, and P. E. Olsen (2011), New seismic reflection profiling across the northern Newark Basin USA: Data acquisition and preliminary results, Abstract GC51B-0979 presented at 2011 Fall Meeting, AGU, San Francisco, Calif., 5–9 Dec.
  • U.S. Department of Energy (2012), United States carbon utilization and storage atlas—Fourth edition (Atlas IV).
  • Wiprut, D. J., and M. D. Zoback (2000), Fault reactivation and fluid flow along a previously dormant normal fault in the northern North Sea, Geology, 28(7), 595598.
  • Zakharova, N. V., D. S. Goldberg, J. M. Matter, M. Stute, T. Takahashi, G. D. O'Mullan, Q. Yang, A. Shao, K. Clauson, and K. Umemoto (2011), Geophysical characterization of fractured-rock aquifers for CO2 injection in the northeastern Newark Basin, Abstract GC44A-08 presented at 2011 Fall Meeting, AGU, San Francisco, Calif., 5–9 Dec.
  • Zakharova, N. V., D. S. Goldberg, and D. Collins (2013), In situ stress constraints from borehole data in the context of CO2-storage site characterization, paper presented at 47th US Rock Mechanics/Geomechanics Symposium, ARMA, San Francisco, Calif.
  • Zoback, M. L. (1992), Stress field constraints on intraplate seismicity in eastern North America, J. Geophys. Res., 97(B8), 11,76111,782.
  • Zoback, M. D. (2010), Reservoir Geomechanics, Cambridge Univ. Press, Cambridge, U. K.
  • Zoback, M. D. (2012), Managing the seismic risk posed by wastewater disposal, Earth, 57(4), 38.
  • Zoback, M. D., and S. M. Gorelick (2012), Earthquake triggering and large-scale geologic storage of carbon dioxide, Proc. Natl. Acad. Sci. U.S.A., 109(26), 10,16410,168.
  • Zoback, M. D., C. A. Barton, M. Brudy, D. A. Castillo, T. Finkbeiner, B. R. Grollimund, D. B. Moos, P. Peska, C. D. Ward, and D. J. Wiprut (2003), Determination of stress orientation and magnitude in deep wells, Int. J. Rock Mech. Min. Sci., 40(7–8), 10491076.