Some Particularity Concerning the Electric Arc Welding of the P/M Steel Pieces

  1. Prof. J. V. Wood2,
  2. Prof. Dr. L. Schultz3 and
  3. Prof. Dr. D. M. Herlach4
  1. Gheorghe Vaduvoiu

Published Online: 25 APR 2006

DOI: 10.1002/3527607277.ch49

Materials Development and Processing - Bulk Amorphous Materials, Undercooling and Powder Metallurgy, Volume 8

Materials Development and Processing - Bulk Amorphous Materials, Undercooling and Powder Metallurgy, Volume 8

How to Cite

Vaduvoiu, G. (2000) Some Particularity Concerning the Electric Arc Welding of the P/M Steel Pieces, in Materials Development and Processing - Bulk Amorphous Materials, Undercooling and Powder Metallurgy, Volume 8 (eds J. V. Wood, L. Schultz and D. M. Herlach), Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, FRG. doi: 10.1002/3527607277.ch49

Editor Information

  1. 2

    University of Nottingham, Division of Materials, Nottingham NG7 2RD, United Kingdom

  2. 3

    Institut für Festkorper- und Werkstofforschung Dresden e.V., Postfach 270016, 01171 Dresden, Germany

  3. 4

    Deutsches Zentrum für Luft- und Raumfahrt e.V., Linder Hohe, 51170 Köln, Germany

Author Information

  1. University of Craiova, Romania

Publication History

  1. Published Online: 25 APR 2006
  2. Published Print: 27 JUN 2000

Book Series:

  1. EUROMAT 99

ISBN Information

Print ISBN: 9783527301935

Online ISBN: 9783527607273

SEARCH

Keywords:

  • electric arc welding of the P/M steel pieces

Summary

The limitations of technical disposal concerning the geometrical configuration as well as the overall dimension of the pieces that can be made out by P/M technology have imposed the study of the possibility of the joining of these pieces. If in the case of the simple configuration pieces with similar cross section, the friction welding or the butt seam welding represents the most indicated solutions [4], [5], [6] etc., the realization of such welded joining between the pieces with different geometrical configuration or the insert of some pieces in mechanical structures made out of classic technologies is possible only by using the electric arc welding, the brazing or the adhesive bonding. Welding process matrix used for some usual sintered pieces is presented, according [4] in table 1.