Investigations of the Primary Cooling in Sheet Ingot Casting

  1. Dipl.-Ing. K. Ehrke Chairman5 and
  2. Prof. Dr. W. Schneider6
  1. Hallvard G. Fjær1,
  2. Andreas Buchholz2,
  3. Benoît Commet3,
  4. Jean-Marie Drezet4 and
  5. Dag Mortensen1

Published Online: 21 APR 2006

DOI: 10.1002/3527607331.ch19

Continuous Casting

Continuous Casting

How to Cite

Fjær, H. G., Buchholz, A., Commet, B., Drezet, J.-M. and Mortensen, D. (2000) Investigations of the Primary Cooling in Sheet Ingot Casting, in Continuous Casting (eds K. Ehrke and W. Schneider), Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, FRG. doi: 10.1002/3527607331.ch19

Editor Information

  1. 5

    ALUMINIUM Essen GmbH, Sulterkamp 71, D-45356 Essen, Germany

  2. 6

    VAW Aluminium AG, Forschung und Entwicklung, Georg-von-Boeselager-Str. 25, D-53117 Bonn, Germany

Author Information

  1. 1

    Institute for energy technology (IFE), Kjeller, Norway

  2. 2

    Corus Research, Development & Technology, Ijmuiden, The Netherlands

  3. 3

    Pechiney Centre de Recherche de Voreppe, Voreppe, France

  4. 4

    Laboratoire de Métallurgie Physique, EPFL, Lausanne, Switzerland

Publication History

  1. Published Online: 21 APR 2006
  2. Published Print: 29 NOV 2000

ISBN Information

Print ISBN: 9783527302833

Online ISBN: 9783527607334

SEARCH

Keywords:

  • continuous casting;
  • primary cooling in sheet ingot casting

Summary

In this paper a selection of these mould temperature measurements are presented, and various phenomena connected to the primary cooling are discussed. In addition, by comparing measurements with results from numerical models, the potential of modelling tools to reproduce the complex phenomena related to the primary cooling is illustrated. Numerical models may provide important information complementing the experimental data, and they provide insight into which parameters and properties that might influence the different mechanisms.