High-speed-drilling in AZ91 D without Lubricoolants
- Prof. Dr.-Ing. K. U. Kainer
Published Online: 15 MAY 2006
DOI: 10.1002/3527607552.ch59
Copyright © 2000 Wiley-VCH Verlag GmbH
Book Title
Magnesium Alloys and their Applications
Additional Information
How to Cite
Tikal, F., Schmier, M. and Vollmer, C. (2006) High-speed-drilling in AZ91 D without Lubricoolants, in Magnesium Alloys and their Applications (ed K. U. Kainer), Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, FRG. doi: 10.1002/3527607552.ch59
Editor Information
GKSS-Forschungszentrum Geesthacht GmbH, Institut für Werkstofforschung, Max-Planck- Straße, D-21502 Geesthacht, Germany
Publication History
- Published Online: 15 MAY 2006
- Published Print: 20 SEP 2000
ISBN Information
Print ISBN: 9783527302826
Online ISBN: 9783527607556
- Summary
- Chapter
Keywords:
- magnesium alloys;
- application;
- high-speed-drilling in AZ91
Summary
Aim of an industry-connection-project of the IPL at the university Gesamthochschule Kassel was the changeover of the cutting procedures of machining magnesium-alloys on dry-treatment and the simultaneous increase of the cutting-parameters. The development of geometrical optimized tools with inner air-supply and particular coatings to the diminution of the adhesion-tendency enables the economic dry-treatment of complex magnesium-workpieces. Specifically when drilling, feeding speeds of 12 m/min and cutting-ways of more than 1 km in dry cutting (without minimal lubrification) could be reached through the development of new tool-geometries.