66. Fabrication Line Capacity Planning Using a Robust Design Dynamic Model

  1. Dr. Genichi Taguchi engineering Executive Director Honorary Member,
  2. Dr. Subir Chowdhury aerospace engineering, industrial management chairman CEO world leader strategist author honorary member honorary doctorate and
  3. Yuin Wu B.S. in chemical engineering professor Executive Director consultant

Published Online: 26 NOV 2007

DOI: 10.1002/9780470258354.cs66

Taguchi's Quality Engineering Handbook

Taguchi's Quality Engineering Handbook

How to Cite

Taguchi, G., Chowdhury, S. and Wu, Y. (2004) Fabrication Line Capacity Planning Using a Robust Design Dynamic Model, in Taguchi's Quality Engineering Handbook, John Wiley & Sons, Inc., Hoboken, NJ, USA. doi: 10.1002/9780470258354.cs66

Author Information

  1. American Supplier Institute (ASI), USA

Publication History

  1. Published Online: 26 NOV 2007
  2. Published Print: 22 OCT 2004

ISBN Information

Print ISBN: 9780471413349

Online ISBN: 9780470258354

SEARCH

Keywords:

  • accelerometer sensors fabrication facility;
  • P-diagram;
  • tail-end process on-line capacity;
  • inner array conditions;
  • dynamic model lines

Summary

This chapter contains sections titled:

  • Introduction

  • Fabrication Line Model

  • Design of Experiment

  • Experimental Procedure

  • Results

  • Summary and Conclusions

  • References