Chapter 66. High-Thermal-Conductivity Densified Graphitic Foams as Novel Bearing Materials

  1. Rajan Tandon,
  2. Andrew Wereszczak and
  3. Edgar Lara-Curzio
  1. Jim Qu1,
  2. Peter J. Blau1,
  3. James Klett1 and
  4. Brian C. Jolly2

Published Online: 27 MAR 2008

DOI: 10.1002/9780470291313.ch66

Mechanical Properties and Performance of Engineering Ceramics II: Ceramic Engineering and Science Proceedings, Volume 27, Issue 2

Mechanical Properties and Performance of Engineering Ceramics II: Ceramic Engineering and Science Proceedings, Volume 27, Issue 2

How to Cite

Qu, J., Blau, P. J., Klett, J. and Jolly, B. C. (2008) High-Thermal-Conductivity Densified Graphitic Foams as Novel Bearing Materials, in Mechanical Properties and Performance of Engineering Ceramics II: Ceramic Engineering and Science Proceedings, Volume 27, Issue 2 (eds R. Tandon, A. Wereszczak and E. Lara-Curzio), John Wiley & Sons, Inc., Hoboken, NJ, USA. doi: 10.1002/9780470291313.ch66

Author Information

  1. 1

    Metals and Ceramics Division, Oak Ridge National Laboratory, P. O. Box 2008, MS 6063, Oak Ridge, TN 37831–6063

  2. 2

    East Tennessee State University, Johnson City, TN 37614–1700

Publication History

  1. Published Online: 27 MAR 2008
  2. Published Print: 1 JAN 2006

ISBN Information

Print ISBN: 9780470080528

Online ISBN: 9780470291313

SEARCH

Keywords:

  • foam-reinforced;
  • ornl;
  • tribological;
  • self-lubricating;
  • DGF

Summary

The high–thermal–conductivity graphitic foams (foam–reinforced carbon–carbon composites) developed at ORNL have been mainly used for thermal management, as in heat sinks for electronic circuit boards and highly–efficient automotive radiators. However, recent studies in our laboratory have rather unexpectedly revealed their potential as novel bearing materials. In addition to their low density and potential for weight savings, there are three primary tribological advantages of the graphitic foam materials: (1) their graphitic structures provide self–lubricating qualities, (2) their extraordinarily high thermal conductivity aids in the efficient removal of frictionally–generated heat, and (3) the pores in the foam serve both as wear debris traps and lubricant reservoirs. Previous studies on the densified graphitic foam (DGF) sliding against steel and alumina at relatively low speed (1 m/s) and low load (10 N), revealed their encouraging self–lubricating behavior, comparable to solid graphite while much better than bronze and polytetrafluoroethylene (Teflon). In this study, pin–on–disk tests with higher speeds (2, 6, and 10 m/s) and higher loads (322 N) were conducted on DGF and graphite disks sliding against a DGF pin. The surface temperature on the graphite disk increased rapidly due to frictional heating and the friction coefficient increased proportionally with surface temperature when it was higher than 40 °C. The DGF disk, however, ran much cooler due to the higher thermal conductivity, and more impressively, the friction coefficient remained low and constant even at elevated disk temperatures. This suggests high potential for the graphitic foam material in weight–sensitive, high–speed, and elevated temperature bearing applications.