Chapter 21. A New Cold Rolled Steel for Porcelain Enameling
- John B. Wachtman Jr.
Published Online: 28 MAR 2008
Copyright © 1988 The American Ceramic Society, Inc. and The Porcelain Enamel Institute
Proceedings of the 49th Porcelain Enamel Institute Technical Forum: Ceramic Engineering and Science Proceedings, Volume 9, Issue 5/6
How to Cite
Furr, S. T. and Ehrsam, O. (1988) A New Cold Rolled Steel for Porcelain Enameling, in Proceedings of the 49th Porcelain Enamel Institute Technical Forum: Ceramic Engineering and Science Proceedings, Volume 9, Issue 5/6 (ed J. B. Wachtman), John Wiley & Sons, Inc., Hoboken, NJ, USA. doi: 10.1002/9780470310489.ch21
- Published Online: 28 MAR 2008
- Published Print: 1 JAN 1988
Print ISBN: 9780470374795
Online ISBN: 9780470310489
- accu-namel sheet;
Accu-Namel Sheet, a new continuous cast, aluminum killed, cold rolled steel shows good potential to be a substitute for ingot cast, drawing quality enameling iron. The new composition has low carbon and low manganese to prevent enamel boiling and provide resistance to sag during enameling; it also contains a boron additive to resist fishscaling and to increase grain growth for enhanced formability. The key step in the manufacture of Accu-Namel Sheet is annealing on a continuous heat treating line (CHTL). Laboratory procedures test the quality of Accu-Namel Sheet against the qualities of a number of other steels.