Chapter 55. Characterization of TiN/Al-O-N Composites
- John B. Wachtman Jr.
Published Online: 26 MAR 2008
Copyright © 1993 The American Ceramic Society
Proceedings of the 17th Annual Conference on Composites and Advanced Ceramic Materials, Part 2 of 2: Ceramic Engineering and Science Proceedings, Volume 14, Issue 9/10
How to Cite
Bennett, J. P., Hoyer, J. L. and Clark, J. A. (1993) Characterization of TiN/Al-O-N Composites, in Proceedings of the 17th Annual Conference on Composites and Advanced Ceramic Materials, Part 2 of 2: Ceramic Engineering and Science Proceedings, Volume 14, Issue 9/10 (ed J. B. Wachtman), John Wiley & Sons, Inc., Hoboken, NJ, USA. doi: 10.1002/9780470314234.ch55
- Published Online: 26 MAR 2008
- Published Print: 1 JAN 1993
Print ISBN: 9780470375273
Online ISBN: 9780470314234
Compositions in the TiN-AlN-Al203 phase diagram are being investigated by the Tuscaloosa Research Center of the U.S. Bureau of Mines for potential use in severe service conditions. Powder mixtures were prepared for evaluation by pressureless sintering in N2 at 1850° C for 2 hours or by hot pressing under 27.6 MPa for 30 min. TiN content of the mixtures varied from 20 to 80 wt % while maintaining an equal weight ratio of A1N to A1203. Phases present after densification include TiN, A10N (spinel and polytypes) and AlN. The effect of the composition and processing parameters on density, porosity, tnicrostructure, electrical resistivity, and flexure strength (room temperature through 1000° C) will be discussed.