Chapter 24. Green Machining of Gelcast Ceramic Materlals
- John B. Wachtman Jr.
Published Online: 26 MAR 2008
Copyright © 1996 The American Ceramic Society
Proceedings of the 20th Annual Conference on Composites, Advanced Ceramics, Materials, and Structures - A: Ceramic Engineering and Science Proceedings, Volume 17, Issue 3
How to Cite
Nunn, S. D. and Kirby, G. H. (2008) Green Machining of Gelcast Ceramic Materlals, in Proceedings of the 20th Annual Conference on Composites, Advanced Ceramics, Materials, and Structures - A: Ceramic Engineering and Science Proceedings, Volume 17, Issue 3 (ed J. B. Wachtman), John Wiley & Sons, Inc., Hoboken, NJ, USA. doi: 10.1002/9780470314821.ch24
- Published Online: 26 MAR 2008
- Published Print: 1 JAN 1996
Print ISBN: 9780470375426
Online ISBN: 9780470314821
Ceramic green bodies prepared by gelcasting were shown to be readily machinable using WC cutting tools. Samples of alumina and silicon nitride were examined. It was found that a gelcasting formulation which uses a high molecular weight cross-linking agent produces a green body having superior machining characteristics. Samples fabricated with a lower molecular weight cross-linker exhibited a poor machined surface finish due to chipping. Cutting speed tests showed that for machining a flat-bottomed groove 3.2 mm wide and 9.5 mm deep (0.125 – 0.375 in.) using three passes, rates of 0.85–6.35 cm/sec (0.33–2.50 in./sec.) could be used without damaging the sample.