3. Manufacturing of Ceramic Matrix Composites for Automotive Applications

  1. Narottam P. Bansal2,
  2. J.P. Singh3 and
  3. H.-T. Lin4
  1. Rainer Gadow and
  2. Marcus Speicher

Published Online: 3 APR 2012

DOI: 10.1002/9781118380925.ch3

Advances in Ceramic Matrix Composites VII

Advances in Ceramic Matrix Composites VII

How to Cite

Gadow, R. and Speicher, M. (2006) Manufacturing of Ceramic Matrix Composites for Automotive Applications, in Advances in Ceramic Matrix Composites VII (eds N. P. Bansal, J.P. Singh and H.-T. Lin), The American Ceramic Society, 735 Ceramic Place, Westerville, Ohio 43081. doi: 10.1002/9781118380925.ch3

Editor Information

  1. 2

    National Aeronautics and Space Administration, Glenn Research Center

  2. 3

    Argonne National Laboratory

  3. 4

    Oak Ridge National Laboratory

Author Information

  1. Institute for Manufacturing Technologies of Ceramic Components and Composites, University of Stuttgart, Allmandring 7b, D-70569 Stuttgart, GERMANY

Publication History

  1. Published Online: 3 APR 2012
  2. Published Print: 1 MAR 2006

ISBN Information

Print ISBN: 9781574981360

Online ISBN: 9781118380925

SEARCH

Keywords:

  • ceramic matrix composites;
  • automotive applications;
  • carbon gas phase impregnation;
  • chemical vapour infiltration;
  • capillary flow effect

Summary

This chapter contains sections titled:

  • Abstract

  • Introduction

  • Technical and Economic Requirements for CMC Friction Components

  • Physicochemical Basics for Reaction Bonded Silicon Ceramic Composites

  • Fundamentals for Ceramic Composites

  • Manufacturing Technologies for Reaction Bonded Ceramics

  • CMC Brake Materials Characterization

  • Component Design in Automotive and Aircraft Brake Systems