Chapter 3. Modeling Micro PIM

  1. Prof. Dr.-Ing. Detlef Löhe3 and
  2. Prof. Dr. Jürgen Haußelt4
  1. D. Kauzlaric1,
  2. A. Greiner1,
  3. J. G. Korvink1,
  4. M. Schulz2 and
  5. R. Heldele2

Published Online: 29 FEB 2008

DOI: 10.1002/9783527616725.ch3

Microengineering of Metals and Ceramics: Part I: Design, Tooling and Injection Molding

Microengineering of Metals and Ceramics: Part I: Design, Tooling and Injection Molding

How to Cite

Kauzlaric, D., Greiner, A., Korvink, J. G., Schulz, M. and Heldele, R. (2005) Modeling Micro PIM, in Microengineering of Metals and Ceramics: Part I: Design, Tooling and Injection Molding (eds D. Löhe and J. Haußelt), Wiley-VCH Verlag GmbH, Weinheim, Germany. doi: 10.1002/9783527616725.ch3

Editor Information

  1. 3

    Institute of Materials Science and Engineering, Universität Karlsruhe, Kaiserstr. 12, 76131 Karlsruhe, Germany

  2. 4

    Institute for Materials Research III, Forschungszentrum Karlsruhe, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany

Author Information

  1. 1

    Institute for Microsystemtechnology, University of Freiburg, Germany

  2. 2

    Institute for Material Research III (IMF III), Forschungszentrum Karlsruhe, Germany

Publication History

  1. Published Online: 29 FEB 2008
  2. Published Print: 27 JUN 2005

ISBN Information

Print ISBN: 9783527312085

Online ISBN: 9783527616725

SEARCH

Keywords:

  • micro powder injection molding;
  • computational fluid dynamics;
  • dissipative particle dynamics;
  • simulation

Summary

This chapter contains sections titled:

  • Introduction

  • Flow Behavior of Polymers in Microchannels

  • Dissipative Particle Dynamics

  • Matching Macroscopic Parameters with DPD

  • Test Geometries

  • Conclusion

  • Acknowledgment

  • References