Chapter 21. Tribological Characterization of Mold Inserts and Materials for Microcomponents

  1. Prof. Dr.-Ing. Detlef Löhe3 and
  2. Prof. Dr. Jürgen Haußelt4
  1. J. Schneider1,
  2. K.-H. Zum Gahr1,2 and
  3. J. Herz1

Published Online: 29 FEB 2008

DOI: 10.1002/9783527616732.ch9

Microengineering of Metals and Ceramics: Part II: Special Replication Techniques, Automation and Properties

Microengineering of Metals and Ceramics: Part II: Special Replication Techniques, Automation and Properties

How to Cite

Schneider, J., Gahr, K.-H. Z. and Herz, J. (2005) Tribological Characterization of Mold Inserts and Materials for Microcomponents, in Microengineering of Metals and Ceramics: Part II: Special Replication Techniques, Automation and Properties (eds D. Löhe and J. Haußelt), Wiley-VCH Verlag GmbH, Weinheim, Germany. doi: 10.1002/9783527616732.ch9

Editor Information

  1. 3

    Institute of Materials Science and Engineering, Universität Karlsruhe, Kaiserstr. 12, 76131 Karlsruhe, Germany

  2. 4

    Institute for Materials Research III, Forschungszentrum Karlsruhe, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany

Author Information

  1. 1

    Institute of Material Science and Engineering II, University of Karlsruhe (TH), Germany

  2. 2

    Institute for Material Research I (IMF I), Research Center Karlsruhe, Germany

Publication History

  1. Published Online: 29 FEB 2008
  2. Published Print: 27 JUL 2005

ISBN Information

Print ISBN: 9783527314935

Online ISBN: 9783527616732

SEARCH

Keywords:

  • microtribology;
  • wear;
  • friction;
  • microtechnology;
  • powder injection molding;
  • ceramic feedstock;
  • mold wear;
  • erosion;
  • abrasion;
  • water lubrication

Summary

This chapter contains sections titled:

  • Introduction

  • Materials and Experimental Methods

  • Results

  • Discussion

  • Conclusions

  • Acknowledgments

  • References