The Correlation of Thermo-Mechanical Stresses on Cutting Tool Wear

  1. Prof. Dr.-Ing. Alfons Fischer2 and
  2. Prof. Dr.-Ing. Kirsten Bobzin3
  1. D. Biermann,
  2. J. F. Felderhoff and
  3. M. Heilmann

Published Online: 3 FEB 2011

DOI: 10.1002/9783527628513.ch95

Friction, Wear and Wear Protection

Friction, Wear and Wear Protection

How to Cite

Biermann, D., Felderhoff, J. F. and Heilmann, M. (2009) The Correlation of Thermo-Mechanical Stresses on Cutting Tool Wear, in Friction, Wear and Wear Protection (eds A. Fischer and K. Bobzin), Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, Germany. doi: 10.1002/9783527628513.ch95

Editor Information

  1. 2

    Institut Produkt Engineering, Werkstofftechnik, Lotharstr. 1, 47057 Duisburg, Germany

  2. 3

    RWTH Aachen University (IOT), Intzestr. 10, 52072 Aachen, Germany

Author Information

  1. Institute of Machining Technology, Technische Universität Dortmund, Dortmund, Germany

Publication History

  1. Published Online: 3 FEB 2011
  2. Published Print: 24 JUN 2009

ISBN Information

Print ISBN: 9783527323661

Online ISBN: 9783527628513

SEARCH

Keywords:

  • tool wear;
  • cylindrical turning;
  • short hole drilling with indexable inserts;
  • single-lip deep hole drilling

Summary

This chapter contains sections titled:

  • Introduction

  • Turning of a Stainless Steel Workpiece with Austenitic-Ferritic Microstructure

  • Short Hole Drilling of a Stainless Steel Workpiece with Austenitic Microstructure

  • Single-lip Deep Hole Drilling of a Stainless Steel Workpiece with Austenitic-ferritic Microstructure

  • Conclusion

  • References